[Tue Jan 31 11:37:23 2012] Detection parameters:
  Position = (389.1, 960.4) = 14 29 18.04 34 30 24.8
  Extent = 2.4" x 1.8", rotation angle = 151 degrees
  Source counts = 213.9 +/- 15.2
  Background counts = 18.1
  Rate = 0.007 +/- 0.0005

[Tue Jan 31 11:37:23 2012] Off-axis axis estimate = 7.85'
[Tue Jan 31 12:11:37 2012] Using EEF radius (= 2.73 ")to estimate initial spatial extent for simple fitting
[Tue Jan 31 12:11:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 31 12:11:37 2012] Initial guess for spatial extent in simple fitting = 2.73"
[Tue Jan 31 12:11:37 2012] source mask rpix=5.5, npix_max = 146, mask sum = 144, frac = 0.986
[Tue Jan 31 12:11:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.73"
[Tue Jan 31 12:26:31 2012] fullrun_ccd2_acisf13133_pi14-548_cl_pass0_src1.ximg exists
[Tue Jan 31 12:26:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13133_pi14-548_cl_pass0_src1.csv
[Tue Jan 31 12:26:31 2012] fullrun_ccd2_acisf13133_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jan 31 12:26:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13133_pi14-548_cl_pass0_src1.csv
[Tue Jan 31 12:26:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13133_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13133_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 31 12:26:31 2012] fullrun_ccd2_acisf13133_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 31 12:26:31 2012] fullrun_ccd2_acisf13133_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 31 12:26:31 2012] Fit fullrun_ccd2_acisf13133_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 31 13:09:56 2012] Spatial fit model total counts = 255.563000, observed total counts = 255.000000
[Tue Jan 31 13:09:56 2012] Offset between fit and detection position for source 1 = 0.601135 pixels
[Tue Jan 31 13:09:56 2012] 255.095200 total counts/ 41.222200 bgd. counts: snr = 33.311208
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.601135 pixels
  Position = (388.8, 960.9) = 14 29 18.07 34 30 24.8
  Extent = 2.6 (2.3-2.8)", rotation angle = 0
  Source counts = 213.9 +/- 16.0
  Background counts = 41.2
  Rate = 0.007 +/- 0.0005
[Tue Jan 31 13:09:56 2012] Vigneting correction estimate = 1.000000
[Tue Jan 31 13:09:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 31 13:09:56 2012] Assessing source extent using major axis lower bound
[Tue Jan 31 13:09:56 2012] Source does appear to be extended
[Tue Jan 31 13:09:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 31 13:37:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 31 13:37:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 31 13:37:54 2012] Initial guess for spatial extent in simple fitting = 2.56"
[Tue Jan 31 13:37:54 2012] source mask rpix=5.2, npix_max = 129, mask sum = 132, frac = 1.017
[Tue Jan 31 13:37:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.56"
[Tue Jan 31 13:49:56 2012] fullrun_ccd2_acisf13133_pi14-548_cl_pass1_src1.ximg exists
[Tue Jan 31 13:49:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13133_pi14-548_cl_pass1_src1.csv
[Tue Jan 31 13:49:56 2012] fullrun_ccd2_acisf13133_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jan 31 13:49:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13133_pi14-548_cl_pass1_src1.csv
[Tue Jan 31 13:49:56 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13133_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13133_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 31 13:49:56 2012] fullrun_ccd2_acisf13133_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 31 13:49:56 2012] fullrun_ccd2_acisf13133_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 31 13:49:56 2012] Fit fullrun_ccd2_acisf13133_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 31 14:33:02 2012] Spatial fit model total counts = 249.364000, observed total counts = 250.000000
[Tue Jan 31 14:33:02 2012] Offset between fit and detection position for source 1 = 0.065797 pixels
[Tue Jan 31 14:33:02 2012] 248.971500 total counts/ 35.832500 bgd. counts: snr = 35.606097
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.065797 pixels
  Position = (388.8, 960.9) = 14 29 18.07 34 30 24.8
  Extent = 2.6 (2.3-2.8)", rotation angle = 0
  Source counts = 213.1 +/- 15.8
  Background counts = 35.8
  Rate = 0.007 +/- 0.0005
[Tue Jan 31 14:33:02 2012] Vigneting correction estimate = 1.000000
[Tue Jan 31 14:33:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 31 14:33:02 2012] Assessing source extent using major axis lower bound
[Tue Jan 31 14:33:02 2012] Source does appear to be extended
[Tue Jan 31 14:33:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 31 14:46:43 2012] Writing source region out to fullrun_ccd2_acisf13133_pi14-548_pass1_cl_src1_src.reg
[Tue Jan 31 14:46:43 2012] Extracting stamp from image fullrun_ccd2_acisf13133_pi14-548_cl_sm2.00.img.gz, (272, 844) - (506, 1078)
[Tue Jan 31 14:46:43 2012] Writing fullrun_ccd2_acisf13133_pi14-548_pass1_cl_src1.gif
[Tue Jan 31 14:46:45 2012] Size of ../../acisf13133/products/events/fullrun_ccd2_acisf13133_pi14-548_pass1_cl_src1_src.evt.gz[events] = 241 counts
[Tue Jan 31 14:46:45 2012] Mean chipx,y = (376.90, 131.82)
[Tue Jan 31 14:46:45 2012] Mean tdetx,y = (3192.82, 3709.10)
[Tue Jan 31 14:46:45 2012] chipx,y range = (348.00-409.00, 105.00-159.00)
[Tue Jan 31 14:46:45 2012] Size of ../../acisf13133/products/events/fullrun_ccd2_acisf13133_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 102 counts
[Tue Jan 31 14:46:46 2012] rmf not found, will run specextract
[Tue Jan 31 14:46:46 2012] arf not found, will run specextract
[Tue Jan 31 14:47:03 2012] ../../acisf13133/products/spectra/fullrun_ccd2_acisf13133_pi14-548_pass1_cl_src1.warf not found
[Tue Jan 31 14:47:03 2012] ../../acisf13133/products/spectra/fullrun_ccd2_acisf13133_pi14-548_pass1_cl_src1.wrmf not found
[Tue Jan 31 14:47:03 2012] Removal of ../../acisf13133/products/spectra/fullrun_ccd2_acisf13133_pi14-548_pass1_cl_src1.soff failed
[Tue Jan 31 14:58:04 2012] Keeping rmf generated by specextract
[Tue Jan 31 14:58:04 2012] 166.441
[Tue Jan 31 15:10:46 2012] Updating aperture counts using extracted products
[Tue Jan 31 15:10:46 2012] Error reading totcts from fullrun_ccd2_acisf13133_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Jan 31 15:10:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 31 15:10:46 2012] Using photon index=1.80, rate=0.00728, arf fullrun_ccd2_acisf13133_pi14-548_pass1_cl_src1.arf
[Tue Jan 31 15:10:46 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 31 15:10:46 2012] Updating source flux to 1.1e-13
[Tue Jan 31 15:10:56 2012] Reading fit data from acisf13133/analysis//spectral/fullrun_ccd2_acisf13133_pi14-548_pass1_cl_src1_pl.csv
[Tue Jan 31 15:10:56 2012] Spectral fit parameter nH value = 5.59054e+20
[Tue Jan 31 15:10:56 2012] Spectral fit parameter PhoIndex value = 3.75861
[Tue Jan 31 15:10:56 2012] Failed to get F(0.3-8.0) from acisf13133/analysis//spectral/fullrun_ccd2_acisf13133_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jan 31 15:10:56 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 31 15:10:56 2012] Using Nh = 5.6e+20, photon index=3.76, rate=0.00728, arf fullrun_ccd2_acisf13133_pi14-548_pass1_cl_src1.arf
[Tue Jan 31 15:10:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 31 15:10:56 2012] Updating source flux to 1.5e-13