[Fri May  3 09:46:31 2013] Detection parameters:
  Position = (773.6, 544.7) = 5 16 44.57 -52 0 3.0
  Extent = 0.5" x 0.5", rotation angle = 160 degrees
  Source counts = 12.9 +/- 3.7
  Background counts = 1.1
  Rate = 0.0005 +/- 0.0001

[Fri May  3 09:46:32 2013] Off-axis axis estimate = 2.66'
[Fri May  3 10:53:41 2013] Using EEF radius (= 0.52 ")to estimate initial spatial extent for simple fitting
[Fri May  3 10:53:41 2013] Initial guess for spatial extent in simple fitting = 0.52"
[Fri May  3 10:53:41 2013] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.933
[Fri May  3 10:53:41 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 0.52"
[Fri May  3 11:08:13 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass0_src12.ximg exists
[Fri May  3 11:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13129_pi14-548_cl_pass0_src12.csv
[Fri May  3 11:08:13 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass0_src12_1.ximg exists
[Fri May  3 11:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13129_pi14-548_cl_pass0_src12.csv
[Fri May  3 11:08:13 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13129_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13129_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 11:08:13 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Fri May  3 11:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13129_pi14-548_cl_pass0_tfrozen_src12.csv
[Fri May  3 11:08:13 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Fri May  3 11:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13129_pi14-548_cl_pass0_tfrozen_src12.csv
[Fri May  3 11:08:13 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13129_pi14-548_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13129_pi14-548_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 11:08:20 2013] Spatial fit model total counts = 12.187600, observed total counts = 16.000000
[Fri May  3 11:08:20 2013] Offset between fit and detection position for source 5 = 0.690152 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.690152 pixels
  Position = (774.1, 545.2) = 5 16 44.57 -52 0 3.0
  Extent = 0.6 (0.3-0.8)", rotation angle = 0
  Source counts = 13.2 +/- 3.6
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Fri May  3 11:08:20 2013] Vigneting correction estimate = 1.000000
[Fri May  3 11:08:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 11:08:20 2013] Assessing source extent using major axis lower bound
[Fri May  3 11:08:20 2013] Source does appear to be extended
[Fri May  3 11:08:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 11:59:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 11:59:07 2013] Initial guess for spatial extent in simple fitting = 0.60"
[Fri May  3 11:59:07 2013] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.357
[Fri May  3 11:59:07 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 0.60"
[Fri May  3 12:13:35 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass1_src12.ximg exists
[Fri May  3 12:13:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13129_pi14-548_cl_pass1_src12.csv
[Fri May  3 12:13:35 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass1_src12_1.ximg exists
[Fri May  3 12:13:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13129_pi14-548_cl_pass1_src12.csv
[Fri May  3 12:13:35 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13129_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13129_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 12:13:35 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Fri May  3 12:13:35 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Fri May  3 12:13:35 2013] Fit fullrun_ccd7_acisf13129_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Fri May  3 12:13:41 2013] Spatial fit model total counts = 13.354300, observed total counts = 16.000000
[Fri May  3 12:13:41 2013] Offset between fit and detection position for source 5 = 0.007818 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.007818 pixels
  Position = (774.1, 545.2) = 5 16 44.57 -52 0 3.0
  Extent = 0.7 (0.5-1.0)" x 0.4 (0.3-0.6)", rotation angle = 18 (339-49) degrees
  Source counts = 14.0 +/- 3.7
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Fri May  3 12:13:41 2013] Vigneting correction estimate = 1.000000
[Fri May  3 12:13:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 12:13:41 2013] Assessing source extent using major axis lower bound
[Fri May  3 12:13:41 2013] Source does appear to be extended
[Fri May  3 12:13:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89
[Fri May  3 12:22:34 2013] Writing source region out to fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src5_src.reg
[Fri May  3 12:22:34 2013] Extracting stamp from image fullrun_ccd7_acisf13129_pi14-548_cl_sm2.00.img.gz, (741, 512) - (808, 579)
[Fri May  3 12:22:34 2013] Writing fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src5.gif
[Fri May  3 12:25:42 2013] Size of ../../acisf13129/products/events/fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src5_src.evt.gz[events] = 14 counts
[Fri May  3 12:25:42 2013] Mean chipx,y = (447.71, 693.00)
[Fri May  3 12:25:42 2013] Mean tdetx,y = (4364.71, 2395.00)
[Fri May  3 12:25:42 2013] chipx,y range = (436.00-465.00, 675.00-710.00)
[Fri May  3 12:25:42 2013] Size of ../../acisf13129/products/events/fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 28 counts
[Fri May  3 12:25:43 2013] Not generating rmf since there are only 13 counts
[Fri May  3 12:25:43 2013] arf not found, will run specextract
[Fri May  3 12:25:51 2013] ../../acisf13129/products/spectra/fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src5.warf not found
[Fri May  3 12:25:51 2013] ../../acisf13129/products/spectra/fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src5.wrmf not found
[Fri May  3 12:25:51 2013] Removal of ../../acisf13129/products/spectra/fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src5.soff failed
[Fri May  3 12:28:15 2013] Spectrum 5 has only 14 counts, deleting rmf
[Fri May  3 12:28:15 2013] 227.501
[Fri May  3 12:28:21 2013] Updating aperture counts using extracted products
[Fri May  3 12:28:21 2013] Total counts from fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src5_src.pi.gz = 14.00
[Fri May  3 12:28:21 2013] Total counts from fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src5_bgd.pi.gz = 28.00
[Fri May  3 12:28:21 2013] Got source and background scale factors 0.000001, 0.000020
[Fri May  3 12:28:21 2013] User source parameters:
  Position = (774.1, 545.2) = 5 16 44.57 -52 0 3.0
  Extent = 0.7 (0.5-1.0)" x 0.4 (0.3-0.6)", rotation angle = 18 (339-49) degrees
  Source aperture counts = 12.7 +/- 4.8
  Background aperture counts = 1.3
  Rate = 0.0005 +/- 0.0002

[Fri May  3 12:28:22 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 12:28:22 2013] Using photon index=1.80, rate=0.000513, arf fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src5.arf
[Fri May  3 12:28:22 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May  3 12:28:22 2013] Updating source flux to 3.9e-15
[Fri May  3 12:28:38 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May  3 12:28:39 2013] acisf13129/analysis//spectral/fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete