[Fri May 3 09:46:31 2013] Detection parameters: Position = (874.5, 297.4) = 5 16 39.18 -52 2 4.7 Extent = 1.0" x 0.5", rotation angle = 139 degrees Source counts = 23.4 +/- 5.1 Background counts = 2.6 Rate = 0.0009 +/- 0.0002 [Fri May 3 09:46:32 2013] Off-axis axis estimate = 4.05' [Fri May 3 10:53:41 2013] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting [Fri May 3 10:53:41 2013] Initial guess for spatial extent in simple fitting = 0.85" [Fri May 3 10:53:41 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.268 [Fri May 3 10:53:41 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 0.85" [Fri May 3 11:08:13 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass0_src5.ximg exists [Fri May 3 11:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13129_pi14-548_cl_pass0_src5.csv [Fri May 3 11:08:13 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass0_src5_1.ximg exists [Fri May 3 11:08:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13129_pi14-548_cl_pass0_src5.csv [Fri May 3 11:08:13 2013] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf13129_pi14-548_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf13129_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 11:08:13 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass0_tfrozen_src5.ximg exists [Fri May 3 11:08:13 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists [Fri May 3 11:08:13 2013] Fit fullrun_ccd7_acisf13129_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly [Fri May 3 11:08:20 2013] Spatial fit model total counts = 26.571000, observed total counts = 29.000000 [Fri May 3 11:08:20 2013] Offset between fit and detection position for source 3 = 1.012961 pixels [Fri May 3 11:08:20 2013] 25.479081 total counts/ 0.795781 bgd. counts: snr = 27.669827 Spatial fit parameters: Offset between fit and detection position for source 3 = 1.012961 pixels Position = (875.5, 297.8) = 5 16 39.15 -52 2 4.7 Extent = 1.4 (0.9-1.7)" x 0.6 (0.5-0.9)", rotation angle = 49 (30-64) degrees Source counts = 24.7 +/- 5.0 Background counts = 0.8 Rate = 0.0009 +/- 0.0002 [Fri May 3 11:08:20 2013] Vigneting correction estimate = 1.000000 [Fri May 3 11:08:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 11:08:20 2013] Assessing source extent using major axis lower bound [Fri May 3 11:08:20 2013] Source does appear to be extended [Fri May 3 11:08:20 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04 [Fri May 3 11:59:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Fri May 3 11:59:07 2013] Initial guess for spatial extent in simple fitting = 1.00" [Fri May 3 11:59:07 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.978 [Fri May 3 11:59:07 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 1.00" [Fri May 3 12:13:35 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass1_src5.ximg exists [Fri May 3 12:13:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13129_pi14-548_cl_pass1_src5.csv [Fri May 3 12:13:35 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass1_src5_1.ximg exists [Fri May 3 12:13:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13129_pi14-548_cl_pass1_src5.csv [Fri May 3 12:13:35 2013] It looks like the fit did not converge You should probably delete fullrun_ccd7_acisf13129_pi14-548_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_ccd7_acisf13129_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 12:13:35 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass1_tfrozen_src5.ximg exists [Fri May 3 12:13:35 2013] fullrun_ccd7_acisf13129_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists [Fri May 3 12:13:35 2013] Fit fullrun_ccd7_acisf13129_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly [Fri May 3 12:13:41 2013] Spatial fit model total counts = 26.036200, observed total counts = 29.000000 [Fri May 3 12:13:41 2013] Offset between fit and detection position for source 3 = 0.533227 pixels Spatial fit parameters: Offset between fit and detection position for source 3 = 0.533227 pixels Position = (875.8, 297.4) = 5 16 39.13 -52 2 4.9 Extent = 1.3 (1.0-1.7)" x 0.6 (0.4-0.8)", rotation angle = 52 (34-67) degrees Source counts = 24.8 +/- 5.0 Background counts = 0.0 Rate = 0.0009 +/- 0.0002 [Fri May 3 12:13:41 2013] Vigneting correction estimate = 1.000000 [Fri May 3 12:13:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 12:13:41 2013] Assessing source extent using major axis lower bound [Fri May 3 12:13:41 2013] Source does appear to be extended [Fri May 3 12:13:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.29 [Fri May 3 12:22:33 2013] Writing source region out to fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src3_src.reg [Fri May 3 12:22:33 2013] Extracting stamp from image fullrun_ccd7_acisf13129_pi14-548_cl_sm2.00.img.gz, (818, 240) - (934, 355) [Fri May 3 12:22:33 2013] Writing fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src3.gif [Fri May 3 12:23:44 2013] Size of ../../acisf13129/products/events/fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src3_src.evt.gz[events] = 23 counts [Fri May 3 12:23:44 2013] Mean chipx,y = (387.13, 947.57) [Fri May 3 12:23:44 2013] Mean tdetx,y = (4304.13, 2649.57) [Fri May 3 12:23:44 2013] chipx,y range = (370.00-404.00, 934.00-963.00) [Fri May 3 12:23:44 2013] Size of ../../acisf13129/products/events/fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 82 counts [Fri May 3 12:23:45 2013] Not generating rmf since there are only 24 counts [Fri May 3 12:23:45 2013] arf not found, will run specextract [Fri May 3 12:23:53 2013] ../../acisf13129/products/spectra/fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src3.warf not found [Fri May 3 12:23:53 2013] ../../acisf13129/products/spectra/fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src3.wrmf not found [Fri May 3 12:23:53 2013] Removal of ../../acisf13129/products/spectra/fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src3.soff failed [Fri May 3 12:28:15 2013] Spectrum 3 has only 25 counts, deleting rmf [Fri May 3 12:28:15 2013] 219.396 [Fri May 3 12:28:20 2013] Updating aperture counts using extracted products [Fri May 3 12:28:20 2013] Total counts from fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src3_src.pi.gz = 23.00 [Fri May 3 12:28:20 2013] Total counts from fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src3_bgd.pi.gz = 82.00 [Fri May 3 12:28:20 2013] Got source and background scale factors 0.000002, 0.000058 [Fri May 3 12:28:20 2013] User source parameters: Position = (875.8, 297.4) = 5 16 39.13 -52 2 4.9 Extent = 1.3 (1.0-1.7)" x 0.6 (0.4-0.8)", rotation angle = 52 (34-67) degrees Source aperture counts = 19.8 +/- 5.9 Background aperture counts = 3.2 Rate = 0.0007 +/- 0.0002 [Fri May 3 12:28:22 2013] Calculating source flux in energy range 0.30-8.00 [Fri May 3 12:28:22 2013] Using photon index=1.80, rate=0.00091, arf fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src3.arf [Fri May 3 12:28:22 2013] Assuming count rate is from the 0.20-8.00 bandpass [Fri May 3 12:28:22 2013] Updating source flux to 7.9e-15 [Fri May 3 12:28:38 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting [Fri May 3 12:28:39 2013] acisf13129/analysis//spectral/fullrun_ccd7_acisf13129_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete