[Fri May 3 09:45:18 2013] Detection parameters: Position = (1328.9, 592.4) = 5 17 44.91 -52 9 39.4 Extent = 4.6" x 4.3", rotation angle = 90 degrees Source counts = 72.3 +/- 15.7 Background counts = 175.7 Rate = 0.003 +/- 0.0006 [Fri May 3 09:45:18 2013] Off-axis axis estimate = 11.69' [Fri May 3 10:30:59 2013] Using EEF radius (= 6.09 ")to estimate initial spatial extent for simple fitting [Fri May 3 10:30:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri May 3 10:30:59 2013] Initial guess for spatial extent in simple fitting = 6.09" [Fri May 3 10:30:59 2013] source mask rpix=12.4, npix_max = 664, mask sum = 676, frac = 1.018 [Fri May 3 10:30:59 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 6.09" [Fri May 3 10:46:29 2013] fullrun_ccd5_acisf13129_pi14-548_cl_pass0_src1.ximg exists [Fri May 3 10:46:29 2013] fullrun_ccd5_acisf13129_pi14-548_cl_pass0_src1_1.ximg exists [Fri May 3 10:46:29 2013] Fit fullrun_ccd5_acisf13129_pi14-548_cl_pass0_src1 appears to have run properly [Fri May 3 10:46:29 2013] fullrun_ccd5_acisf13129_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Fri May 3 10:46:29 2013] fullrun_ccd5_acisf13129_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Fri May 3 10:46:29 2013] Fit fullrun_ccd5_acisf13129_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Fri May 3 11:08:17 2013] Spatial fit model total counts = 424.334000, observed total counts = 406.000000 [Fri May 3 11:08:17 2013] Offset between fit and detection position for source 1 = 2.736365 pixels [Fri May 3 11:08:17 2013] 423.866000 total counts/ 313.040000 bgd. counts: snr = 6.263856 Spatial fit parameters: Offset between fit and detection position for source 1 = 2.736365 pixels Position = (1331.0, 594.2) = 5 17 44.83 -52 9 38.8 Extent = 9.5 (6.8-12.2)" x 5.9 (3.7-9.4)", rotation angle = 96 (336-236) degrees Source counts = 110.8 +/- 20.6 Background counts = 313.0 Rate = 0.004 +/- 0.0008 [Fri May 3 11:08:17 2013] Vigneting correction estimate = 1.000000 [Fri May 3 11:08:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 11:08:17 2013] Assessing source extent using major axis lower bound [Fri May 3 11:08:17 2013] Source does appear to be extended [Fri May 3 11:08:17 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.73 [Fri May 3 11:33:52 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Fri May 3 11:33:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri May 3 11:33:52 2013] Initial guess for spatial extent in simple fitting = 7.70" [Fri May 3 11:33:52 2013] source mask rpix=15.7, npix_max = 1043, mask sum = 1024, frac = 0.981 [Fri May 3 11:33:52 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.70" [Fri May 3 11:51:50 2013] fullrun_ccd5_acisf13129_pi14-548_cl_pass1_src1.ximg exists [Fri May 3 11:51:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf13129_pi14-548_cl_pass1_src1.csv [Fri May 3 11:51:50 2013] fullrun_ccd5_acisf13129_pi14-548_cl_pass1_src1_1.ximg exists [Fri May 3 11:51:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf13129_pi14-548_cl_pass1_src1.csv [Fri May 3 11:51:50 2013] It looks like the fit did not converge You should probably delete fullrun_ccd5_acisf13129_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd5_acisf13129_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 11:51:50 2013] fullrun_ccd5_acisf13129_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Fri May 3 11:51:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf13129_pi14-548_cl_pass1_tfrozen_src1.csv [Fri May 3 11:51:50 2013] fullrun_ccd5_acisf13129_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Fri May 3 11:51:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd5_acisf13129_pi14-548_cl_pass1_tfrozen_src1.csv [Fri May 3 11:51:50 2013] It looks like the fit did not converge You should probably delete fullrun_ccd5_acisf13129_pi14-548_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd5_acisf13129_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 12:13:38 2013] Warning, spatial fit 1 centroid is now closest to src. 3 [Fri May 3 12:13:38 2013] Vigneting correction estimate = 1.000000 [Fri May 3 12:13:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 12:13:38 2013] Assessing source extent using major axis lower bound [Fri May 3 12:13:38 2013] Source does appear to be extended [Fri May 3 12:13:38 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.73 [Fri May 3 12:16:52 2013] Writing source region out to fullrun_ccd5_acisf13129_pi14-548_pass1_cl_src1_src.reg [Fri May 3 12:16:52 2013] Extracting stamp from image fullrun_ccd5_acisf13129_pi14-548_cl_sm2.00.img.gz, (897, 160) - (1451, 1028) [Fri May 3 12:16:52 2013] Writing fullrun_ccd5_acisf13129_pi14-548_pass1_cl_src1.gif [Fri May 3 12:16:54 2013] Size of ../../acisf13129/products/events/fullrun_ccd5_acisf13129_pi14-548_pass1_cl_src1_src.evt.gz[events] = 444 counts [Fri May 3 12:16:54 2013] Mean chipx,y = (937.35, 972.72) [Fri May 3 12:16:54 2013] Mean tdetx,y = (2770.35, 2674.72) [Fri May 3 12:16:54 2013] chipx,y range = (866.00-1004.00, 905.00-1023.00) [Fri May 3 12:16:54 2013] Size of ../../acisf13129/products/events/fullrun_ccd5_acisf13129_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 2788 counts [Fri May 3 12:16:55 2013] rmf not found, will run specextract [Fri May 3 12:16:55 2013] arf not found, will run specextract [Fri May 3 12:17:03 2013] ../../acisf13129/products/spectra/fullrun_ccd5_acisf13129_pi14-548_pass1_cl_src1.warf not found [Fri May 3 12:17:03 2013] ../../acisf13129/products/spectra/fullrun_ccd5_acisf13129_pi14-548_pass1_cl_src1.wrmf not found [Fri May 3 12:17:03 2013] Removal of ../../acisf13129/products/spectra/fullrun_ccd5_acisf13129_pi14-548_pass1_cl_src1.soff failed [Fri May 3 12:17:45 2013] Keeping rmf generated by specextract [Fri May 3 12:17:45 2013] 147.583 [Fri May 3 12:28:17 2013] Updating aperture counts using extracted products [Fri May 3 12:28:17 2013] Total counts from fullrun_ccd5_acisf13129_pi14-548_pass1_cl_src1_src.pi.gz = 444.00 [Fri May 3 12:28:17 2013] Total counts from fullrun_ccd5_acisf13129_pi14-548_pass1_cl_src1_bgd.pi.gz = 2788.00 [Fri May 3 12:28:17 2013] Got source and background scale factors 0.000174, 0.003290 [Fri May 3 12:28:17 2013] User source parameters: Position = (1331.0, 594.2) = 5 17 44.83 -52 9 38.8 Extent = 9.5 (6.8-12.2)" x 5.9 (3.7-9.4)", rotation angle = 96 (336-236) degrees Source aperture counts = 296.8 +/- 22.1 Background aperture counts = 147.2 Rate = 0.01 +/- 0.0008 [Fri May 3 12:28:18 2013] Calculating source flux in energy range 0.30-8.00 [Fri May 3 12:28:18 2013] Using photon index=1.80, rate=0.00407, arf fullrun_ccd5_acisf13129_pi14-548_pass1_cl_src1.arf [Fri May 3 12:28:18 2013] Assuming count rate is from the 0.20-8.00 bandpass [Fri May 3 12:28:18 2013] Updating source flux to 4.9e-14 [Fri May 3 12:28:32 2013] Reading fit data from acisf13129/analysis//spectral/fullrun_ccd5_acisf13129_pi14-548_pass1_cl_src1_pl.csv [Fri May 3 12:28:32 2013] Spectral fit parameter nH value = 2.87038e+14 [Fri May 3 12:28:32 2013] Spectral fit parameter PhoIndex value = 0.852128 [Fri May 3 12:28:32 2013] Failed to get F(0.3-8.0) from acisf13129/analysis//spectral/fullrun_ccd5_acisf13129_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Fri May 3 12:28:32 2013] Calculating source flux in energy range 0.30-8.00 [Fri May 3 12:28:32 2013] Using Nh = 2.9e+14, photon index=0.85, rate=0.00407, arf fullrun_ccd5_acisf13129_pi14-548_pass1_cl_src1.arf [Fri May 3 12:28:32 2013] Assuming count rate is from the 0.20-8.00 bandpass [Fri May 3 12:28:32 2013] Updating source flux to 7.8e-14