[Thu Feb 23 07:09:57 2012] Detection parameters:
  Position = (481.3, 271.1) = 6 16 27.12 -52 22 20.9
  Extent = 0.5" x 0.5", rotation angle = 117 degrees
  Source counts = 14.9 +/- 3.9
  Background counts = 0.1
  Rate = 0.002 +/- 0.0004

[Thu Feb 23 07:09:58 2012] Off-axis axis estimate = 1.75'
[Thu Feb 23 07:22:35 2012] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 07:22:35 2012] Initial guess for spatial extent in simple fitting = 0.41"
[Thu Feb 23 07:22:35 2012] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.848
[Thu Feb 23 07:22:35 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 0.41"
[Thu Feb 23 07:32:00 2012] fullrun_ccd2_acisf13127_pi14-548_cl_pass0_src4.ximg exists
[Thu Feb 23 07:32:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13127_pi14-548_cl_pass0_src4.csv
[Thu Feb 23 07:32:00 2012] fullrun_ccd2_acisf13127_pi14-548_cl_pass0_src4_1.ximg exists
[Thu Feb 23 07:32:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13127_pi14-548_cl_pass0_src4.csv
[Thu Feb 23 07:32:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13127_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13127_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 07:32:00 2012] fullrun_ccd2_acisf13127_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Thu Feb 23 07:32:00 2012] fullrun_ccd2_acisf13127_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Feb 23 07:32:00 2012] Fit fullrun_ccd2_acisf13127_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Feb 23 07:39:39 2012] Spatial fit model total counts = 16.182700, observed total counts = 17.000000
[Thu Feb 23 07:39:39 2012] Offset between fit and detection position for source 5 = 0.793529 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.793529 pixels
  Position = (481.8, 271.7) = 6 16 27.12 -52 22 20.9
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 16.4 +/- 4.1
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Thu Feb 23 07:39:39 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 07:39:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 07:39:39 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 07:39:39 2012] Source does appear to be extended
[Thu Feb 23 07:39:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 07:50:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 07:50:56 2012] Initial guess for spatial extent in simple fitting = 0.36"
[Thu Feb 23 07:50:56 2012] source mask rpix=0.7, npix_max = 6, mask sum = 6, frac = 0.992
[Thu Feb 23 07:50:56 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 0.36"
[Thu Feb 23 07:59:17 2012] fullrun_ccd2_acisf13127_pi14-548_cl_pass1_src4.ximg exists
[Thu Feb 23 07:59:17 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf13127_pi14-548_cl_pass1_src4.csv
[Thu Feb 23 07:59:17 2012] fullrun_ccd2_acisf13127_pi14-548_cl_pass1_src4_1.ximg exists
[Thu Feb 23 07:59:17 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf13127_pi14-548_cl_pass1_src4.csv
[Thu Feb 23 07:59:17 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13127_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13127_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 07:59:17 2012] fullrun_ccd2_acisf13127_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Thu Feb 23 07:59:17 2012] fullrun_ccd2_acisf13127_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Feb 23 07:59:17 2012] Fit fullrun_ccd2_acisf13127_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Feb 23 08:05:43 2012] Spatial fit model total counts = 16.189700, observed total counts = 17.000000
[Thu Feb 23 08:05:43 2012] Offset between fit and detection position for source 5 = 0.002343 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.002343 pixels
  Position = (481.8, 271.7) = 6 16 27.12 -52 22 20.9
  Extent = 0.3 (0.3-0.5)", rotation angle = 0
  Source counts = 16.3 +/- 4.0
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Thu Feb 23 08:05:43 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 08:05:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 08:05:43 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 08:05:43 2012] Source does appear to be extended
[Thu Feb 23 08:05:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 08:10:52 2012] Writing source region out to fullrun_ccd2_acisf13127_pi14-548_pass1_cl_src5_src.reg
[Thu Feb 23 08:10:52 2012] Extracting stamp from image fullrun_ccd2_acisf13127_pi14-548_cl_sm2.00.img.gz, (466, 256) - (498, 287)
[Thu Feb 23 08:10:52 2012] Writing fullrun_ccd2_acisf13127_pi14-548_pass1_cl_src5.gif
[Thu Feb 23 08:12:44 2012] Size of ../../acisf13127/products/events/fullrun_ccd2_acisf13127_pi14-548_pass1_cl_src5_src.evt.gz[events] = 16 counts
[Thu Feb 23 08:12:44 2012] Mean chipx,y = (452.69, 835.00)
[Thu Feb 23 08:12:44 2012] Mean tdetx,y = (3896.00, 3633.31)
[Thu Feb 23 08:12:44 2012] chipx,y range = (434.00-464.00, 818.00-850.00)
[Thu Feb 23 08:12:44 2012] Size of ../../acisf13127/products/events/fullrun_ccd2_acisf13127_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 1 counts
[Thu Feb 23 08:12:45 2012] Not generating rmf since there are only 16 counts
[Thu Feb 23 08:12:45 2012] arf not found, will run specextract
[Thu Feb 23 08:13:18 2012] ../../acisf13127/products/spectra/fullrun_ccd2_acisf13127_pi14-548_pass1_cl_src5.warf not found
[Thu Feb 23 08:13:18 2012] ../../acisf13127/products/spectra/fullrun_ccd2_acisf13127_pi14-548_pass1_cl_src5.wrmf not found
[Thu Feb 23 08:13:18 2012] Removal of ../../acisf13127/products/spectra/fullrun_ccd2_acisf13127_pi14-548_pass1_cl_src5.soff failed
[Thu Feb 23 08:18:59 2012] Spectrum 5 has only 16 counts, deleting rmf
[Thu Feb 23 08:18:59 2012] 192.845
[Thu Feb 23 08:25:18 2012] Updating aperture counts using extracted products
[Thu Feb 23 08:25:18 2012] Error reading totcts from fullrun_ccd2_acisf13127_pi14-548_pass1_cl_src5_src.pi.gz
[Thu Feb 23 08:25:18 2012] Calculating source flux in energy range 0.30-8.00
[Thu Feb 23 08:25:18 2012] Using photon index=1.80, rate=0.00164, arf fullrun_ccd2_acisf13127_pi14-548_pass1_cl_src5.arf
[Thu Feb 23 08:25:18 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Feb 23 08:25:18 2012] Updating source flux to 2e-14
[Thu Feb 23 08:25:28 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Feb 23 08:25:29 2012] acisf13127/analysis//spectral/fullrun_ccd2_acisf13127_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete