[Wed Feb 22 10:06:23 2012] Detection parameters:
  Position = (535.5, 578.0) = 1 43 57.48 2 18 58.3
  Extent = 0.5" x 0.5", rotation angle = 60 degrees
  Source counts = 21.0 +/- 4.9
  Background counts = 3.0
  Rate = 0.0004 +/- 9e-05

[Wed Feb 22 10:06:23 2012] Off-axis axis estimate = 2.28'
[Wed Feb 22 11:36:08 2012] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 11:36:08 2012] Initial guess for spatial extent in simple fitting = 0.46"
[Wed Feb 22 11:36:08 2012] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.724
[Wed Feb 22 11:36:08 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 0.46"
[Wed Feb 22 11:54:18 2012] fullrun_ccd7_acisf13124_pi14-548_cl_pass0_src13.ximg exists
[Wed Feb 22 11:54:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13124_pi14-548_cl_pass0_src13.csv
[Wed Feb 22 11:54:18 2012] fullrun_ccd7_acisf13124_pi14-548_cl_pass0_src13_1.ximg exists
[Wed Feb 22 11:54:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13124_pi14-548_cl_pass0_src13.csv
[Wed Feb 22 11:54:18 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13124_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13124_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 11:54:18 2012] fullrun_ccd7_acisf13124_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Wed Feb 22 11:54:18 2012] fullrun_ccd7_acisf13124_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Feb 22 11:54:18 2012] Fit fullrun_ccd7_acisf13124_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Feb 22 11:54:27 2012] Spatial fit model total counts = 32.999600, observed total counts = 33.000000
[Wed Feb 22 11:54:27 2012] Offset between fit and detection position for source 10 = 0.418291 pixels
[Wed Feb 22 11:54:27 2012] 33.598800 total counts/ 14.134800 bgd. counts: snr = 5.177108
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.418291 pixels
  Position = (535.8, 578.3) = 1 43 57.49 2 18 58.2
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 19.5 +/- 5.8
  Background counts = 14.1
  Rate = 0.0004 +/- 0.0001
[Wed Feb 22 11:54:27 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 11:54:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 11:54:27 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 11:54:27 2012] Source does appear to be extended
[Wed Feb 22 11:54:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 13:11:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 22 13:11:24 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Feb 22 13:11:24 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.326
[Wed Feb 22 13:11:24 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 0.39"
[Wed Feb 22 13:25:04 2012] fullrun_ccd7_acisf13124_pi14-548_cl_pass1_src13.ximg exists
[Wed Feb 22 13:25:04 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf13124_pi14-548_cl_pass1_src13.csv
[Wed Feb 22 13:25:04 2012] fullrun_ccd7_acisf13124_pi14-548_cl_pass1_src13_1.ximg exists
[Wed Feb 22 13:25:04 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf13124_pi14-548_cl_pass1_src13.csv
[Wed Feb 22 13:25:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13124_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13124_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 13:25:04 2012] fullrun_ccd7_acisf13124_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Wed Feb 22 13:25:04 2012] fullrun_ccd7_acisf13124_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Feb 22 13:25:04 2012] Fit fullrun_ccd7_acisf13124_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Feb 22 13:25:11 2012] Spatial fit model total counts = 33.710300, observed total counts = 34.000000
[Wed Feb 22 13:25:11 2012] Offset between fit and detection position for source 10 = 0.009532 pixels
[Wed Feb 22 13:25:11 2012] 34.266300 total counts/ 14.967600 bgd. counts: snr = 4.988293
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.009532 pixels
  Position = (535.8, 578.3) = 1 43 57.49 2 18 58.2
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 19.3 +/- 5.9
  Background counts = 15.0
  Rate = 0.0004 +/- 0.0001
[Wed Feb 22 13:25:11 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 13:25:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 13:25:11 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 13:25:11 2012] Source does appear to be extended
[Wed Feb 22 13:25:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 13:38:47 2012] Writing source region out to fullrun_ccd7_acisf13124_pi14-548_pass1_cl_src10_src.reg
[Wed Feb 22 13:38:47 2012] Extracting stamp from image fullrun_ccd7_acisf13124_pi14-548_cl_sm2.00.img.gz, (517, 560) - (554, 597)
[Wed Feb 22 13:38:47 2012] Writing fullrun_ccd7_acisf13124_pi14-548_pass1_cl_src10.gif
[Wed Feb 22 13:42:07 2012] Size of ../../acisf13124/products/events/fullrun_ccd7_acisf13124_pi14-548_pass1_cl_src10_src.evt.gz[events] = 22 counts
[Wed Feb 22 13:42:07 2012] Mean chipx,y = (467.77, 508.68)
[Wed Feb 22 13:42:07 2012] Mean tdetx,y = (4384.77, 2210.68)
[Wed Feb 22 13:42:07 2012] chipx,y range = (446.00-481.00, 486.00-524.00)
[Wed Feb 22 13:42:07 2012] Size of ../../acisf13124/products/events/fullrun_ccd7_acisf13124_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 20 counts
[Wed Feb 22 13:42:08 2012] Not generating rmf since there are only 19 counts
[Wed Feb 22 13:42:08 2012] arf not found, will run specextract
[Wed Feb 22 13:42:15 2012] ../../acisf13124/products/spectra/fullrun_ccd7_acisf13124_pi14-548_pass1_cl_src10.warf not found
[Wed Feb 22 13:42:15 2012] ../../acisf13124/products/spectra/fullrun_ccd7_acisf13124_pi14-548_pass1_cl_src10.wrmf not found
[Wed Feb 22 13:42:15 2012] Removal of ../../acisf13124/products/spectra/fullrun_ccd7_acisf13124_pi14-548_pass1_cl_src10.soff failed
[Wed Feb 22 13:42:40 2012] Spectrum 10 has only 19 counts, deleting rmf
[Wed Feb 22 13:42:40 2012] 229.978
[Wed Feb 22 13:42:43 2012] Updating aperture counts using extracted products
[Wed Feb 22 13:42:43 2012] Error reading totcts from fullrun_ccd7_acisf13124_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Feb 22 13:42:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 13:42:43 2012] Using photon index=1.80, rate=0.000368, arf fullrun_ccd7_acisf13124_pi14-548_pass1_cl_src10.arf
[Wed Feb 22 13:42:43 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 22 13:42:43 2012] Updating source flux to 2.8e-15
[Wed Feb 22 13:42:59 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting