[Wed Feb 22 10:04:58 2012] Detection parameters:
  Position = (825.5, 995.9) = 1 44 32.51 2 29 26.5
  Extent = 2.4" x 1.4", rotation angle = 149 degrees
  Source counts = 18.0 +/- 6.2
  Background counts = 21.0
  Rate = 0.0003 +/- 0.0001

[Wed Feb 22 10:04:58 2012] Off-axis axis estimate = 12.04'
[Wed Feb 22 10:08:30 2012] Using EEF radius (= 6.48 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 10:08:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 10:08:30 2012] Initial guess for spatial extent in simple fitting = 6.48"
[Wed Feb 22 10:08:30 2012] source mask rpix=13.2, npix_max = 746, mask sum = 728, frac = 0.975
[Wed Feb 22 10:08:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.48"
[Wed Feb 22 10:44:27 2012] fullrun_ccd2_acisf13124_pi14-548_cl_pass0_src1.ximg exists
[Wed Feb 22 10:44:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13124_pi14-548_cl_pass0_src1.csv
[Wed Feb 22 10:44:27 2012] fullrun_ccd2_acisf13124_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Feb 22 10:44:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf13124_pi14-548_cl_pass0_src1.csv
[Wed Feb 22 10:44:27 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf13124_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf13124_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 10:44:27 2012] fullrun_ccd2_acisf13124_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Feb 22 10:44:27 2012] fullrun_ccd2_acisf13124_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Feb 22 10:44:27 2012] Fit fullrun_ccd2_acisf13124_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Feb 22 11:54:22 2012] Spatial fit model total counts = 150.518000, observed total counts = 151.000000
[Wed Feb 22 11:54:22 2012] Offset between fit and detection position for source 2 = 3.554207 pixels
[Wed Feb 22 11:54:22 2012] 149.883200 total counts/ 137.996000 bgd. counts: snr = 1.011920
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.554207 pixels
  Position = (823.2, 998.6) = 1 44 32.61 2 29 27.6
  Extent = 1.6" x 1.6", rotation angle = 0
  Source counts = 11.9 +/- 12.2
  Background counts = 138.0
  Rate = 0.0002 +/- 0.0002
  Deleting source due to low Poisson probability