[Sat Oct 15 06:48:30 2011] Detection parameters:
  Position = (976.2, 361.5) = 15 55 38.10 66 25 46.3
  Extent = 0.5" x 0.5", rotation angle = 168 degrees
  Source counts = 20.2 +/- 4.6
  Background counts = 0.8
  Rate = 0.0004 +/- 9e-05

[Sat Oct 15 06:48:30 2011] Off-axis axis estimate = 3.32'
[Sat Oct 15 07:43:06 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 07:43:06 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Sat Oct 15 07:43:06 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.906
[Sat Oct 15 07:43:06 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.65"
[Sat Oct 15 08:03:58 2011] fullrun_ccd3_acisf13120_pi14-548_cl_pass0_src10.ximg exists
[Sat Oct 15 08:03:58 2011] fullrun_ccd3_acisf13120_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Oct 15 08:03:58 2011] Fit fullrun_ccd3_acisf13120_pi14-548_cl_pass0_src10 appears to have run properly
[Sat Oct 15 08:03:58 2011] fullrun_ccd3_acisf13120_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Oct 15 08:03:58 2011] fullrun_ccd3_acisf13120_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Oct 15 08:03:58 2011] Fit fullrun_ccd3_acisf13120_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Oct 15 08:08:36 2011] Spatial fit model total counts = 23.289600, observed total counts = 24.000000
[Sat Oct 15 08:08:36 2011] Offset between fit and detection position for source 12 = 0.714848 pixels
[Sat Oct 15 08:08:36 2011] 23.733570 total counts/ 3.210270 bgd. counts: snr = 11.454507
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.714848 pixels
  Position = (976.7, 362.0) = 15 55 38.10 66 25 46.3
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 20.5 +/- 4.9
  Background counts = 3.2
  Rate = 0.0004 +/- 0.0001
[Sat Oct 15 08:08:36 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 08:08:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 08:08:36 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 08:08:36 2011] Source does appear to be extended
[Sat Oct 15 08:08:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 09:06:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 09:06:45 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Sat Oct 15 09:06:45 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.154
[Sat Oct 15 09:06:45 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.55"
[Sat Oct 15 09:23:39 2011] fullrun_ccd3_acisf13120_pi14-548_cl_pass1_src10.ximg exists
[Sat Oct 15 09:23:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13120_pi14-548_cl_pass1_src10.csv
[Sat Oct 15 09:23:39 2011] fullrun_ccd3_acisf13120_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Oct 15 09:23:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13120_pi14-548_cl_pass1_src10.csv
[Sat Oct 15 09:23:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13120_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13120_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 09:23:39 2011] fullrun_ccd3_acisf13120_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Oct 15 09:23:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13120_pi14-548_cl_pass1_tfrozen_src10.csv
[Sat Oct 15 09:23:39 2011] fullrun_ccd3_acisf13120_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Oct 15 09:23:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13120_pi14-548_cl_pass1_tfrozen_src10.csv
[Sat Oct 15 09:23:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13120_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13120_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 09:28:44 2011] Spatial fit model total counts = 20.289800, observed total counts = 23.000000
[Sat Oct 15 09:28:44 2011] Offset between fit and detection position for source 12 = 0.032523 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.032523 pixels
  Position = (976.7, 361.9) = 15 55 38.10 66 25 46.3
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 20.7 +/- 4.5
  Background counts = 0.0
  Rate = 0.0004 +/- 9e-05
[Sat Oct 15 09:28:44 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 09:28:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 09:28:44 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 09:28:44 2011] Source does appear to be extended
[Sat Oct 15 09:28:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 09:42:52 2011] Writing source region out to fullrun_ccd3_acisf13120_pi14-548_pass1_cl_src12_src.reg
[Sat Oct 15 09:42:52 2011] Extracting stamp from image fullrun_ccd3_acisf13120_pi14-548_cl_sm2.00.img.gz, (950, 335) - (1003, 388)
[Sat Oct 15 09:42:52 2011] Writing fullrun_ccd3_acisf13120_pi14-548_pass1_cl_src12.gif
[Sat Oct 15 09:47:30 2011] Size of ../../acisf13120/products/events/fullrun_ccd3_acisf13120_pi14-548_pass1_cl_src12_src.evt.gz[events] = 21 counts
[Sat Oct 15 09:47:30 2011] Mean chipx,y = (914.57, 682.86)
[Sat Oct 15 09:47:30 2011] Mean tdetx,y = (4449.14, 3975.57)
[Sat Oct 15 09:47:30 2011] chipx,y range = (896.00-933.00, 664.00-696.00)
[Sat Oct 15 09:47:30 2011] Size of ../../acisf13120/products/events/fullrun_ccd3_acisf13120_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 4 counts
[Sat Oct 15 09:47:31 2011] Not generating rmf since there are only 20 counts
[Sat Oct 15 09:47:31 2011] arf not found, will run specextract
[Sat Oct 15 09:47:56 2011] ../../acisf13120/products/spectra/fullrun_ccd3_acisf13120_pi14-548_pass1_cl_src12.warf not found
[Sat Oct 15 09:47:56 2011] ../../acisf13120/products/spectra/fullrun_ccd3_acisf13120_pi14-548_pass1_cl_src12.wrmf not found
[Sat Oct 15 09:47:56 2011] Removal of ../../acisf13120/products/spectra/fullrun_ccd3_acisf13120_pi14-548_pass1_cl_src12.soff failed
[Sat Oct 15 09:53:35 2011] Spectrum 12 has only 21 counts, deleting rmf
[Sat Oct 15 09:53:35 2011] 198.923
[Sat Oct 15 09:54:24 2011] Updating aperture counts using extracted products
[Sat Oct 15 09:54:24 2011] Error reading totcts from fullrun_ccd3_acisf13120_pi14-548_pass1_cl_src12_src.pi.gz
[Sat Oct 15 09:54:24 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 09:54:24 2011] Using photon index=1.80, rate=0.000419, arf fullrun_ccd3_acisf13120_pi14-548_pass1_cl_src12.arf
[Sat Oct 15 09:54:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 09:54:24 2011] Updating source flux to 4.9e-15
[Sat Oct 15 09:54:47 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting