[Tue Sep 27 16:50:21 2011] Detection parameters:
  Position = (978.8, 982.8) = 14 14 54.21 36 16 11.8
  Extent = 2.1" x 1.4", rotation angle = 10 degrees
  Source counts = 95.8 +/- 10.6
  Background counts = 16.2
  Rate = 0.002 +/- 0.0002

[Tue Sep 27 16:50:23 2011] Off-axis axis estimate = 6.49'
[Tue Sep 27 16:51:14 2011] Using EEF radius (= 1.89 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 16:51:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 16:51:14 2011] Initial guess for spatial extent in simple fitting = 1.89"
[Tue Sep 27 16:51:14 2011] source mask rpix=3.8, npix_max = 75, mask sum = 81, frac = 1.077
[Tue Sep 27 16:51:14 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.89"
[Tue Sep 27 16:51:14 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass0_src3.ximg exists
[Tue Sep 27 16:51:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13118_pi14-548_cl_pass0_src3.csv
[Tue Sep 27 16:51:14 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Sep 27 16:51:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13118_pi14-548_cl_pass0_src3.csv
[Tue Sep 27 16:51:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13118_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13118_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 16:51:15 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Sep 27 16:51:15 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Sep 27 16:51:15 2011] Fit fullrun_ccd7_acisf13118_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Sep 27 16:51:25 2011] Spatial fit model total counts = 105.985000, observed total counts = 106.000000
[Tue Sep 27 16:51:25 2011] Offset between fit and detection position for source 3 = 0.290420 pixels
[Tue Sep 27 16:51:25 2011] 106.810400 total counts/ 18.678300 bgd. counts: snr = 20.392264
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.290420 pixels
  Position = (979.1, 982.8) = 14 14 54.21 36 16 11.6
  Extent = 2.0 (1.4-2.6)", rotation angle = 0
  Source counts = 88.1 +/- 10.3
  Background counts = 18.7
  Rate = 0.002 +/- 0.0002
[Tue Sep 27 16:51:25 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 16:51:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 16:51:25 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 16:51:25 2011] Source does appear to be extended
[Tue Sep 27 16:51:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 16:51:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 16:51:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 16:51:41 2011] Initial guess for spatial extent in simple fitting = 2.00"
[Tue Sep 27 16:51:41 2011] source mask rpix=4.1, npix_max = 83, mask sum = 90, frac = 1.077
[Tue Sep 27 16:51:41 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.00"
[Tue Sep 27 16:51:42 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass1_src3.ximg exists
[Tue Sep 27 16:51:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13118_pi14-548_cl_pass1_src3.csv
[Tue Sep 27 16:51:42 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Sep 27 16:51:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13118_pi14-548_cl_pass1_src3.csv
[Tue Sep 27 16:51:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13118_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13118_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 16:51:43 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Sep 27 16:51:43 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Sep 27 16:51:43 2011] Fit fullrun_ccd7_acisf13118_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Sep 27 16:51:51 2011] Spatial fit model total counts = 111.951000, observed total counts = 111.000000
[Tue Sep 27 16:51:51 2011] Offset between fit and detection position for source 3 = 0.320374 pixels
[Tue Sep 27 16:51:51 2011] 112.571100 total counts/ 30.003800 bgd. counts: snr = 15.073703
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.320374 pixels
  Position = (979.4, 982.9) = 14 14 54.20 36 16 11.6
  Extent = 1.9 (1.4-2.5)", rotation angle = 0
  Source counts = 82.6 +/- 10.6
  Background counts = 30.0
  Rate = 0.002 +/- 0.0002
[Tue Sep 27 16:51:51 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 16:51:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 16:51:51 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 16:51:51 2011] Source does appear to be extended
[Tue Sep 27 16:51:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 16:53:13 2011] Not overwriting source region fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src3_src.reg
[Tue Sep 27 16:53:13 2011] Extracting stamp from image fullrun_ccd7_acisf13118_pi14-548_cl_sm2.00.img.gz, (894, 897) - (1065, 1068)
[Tue Sep 27 16:53:13 2011] Writing fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src3.gif
[Tue Sep 27 16:53:21 2011] ../../acisf13118/products/events/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src3_src.evt and ../../acisf13118/products/events/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Sep 27 16:53:21 2011] Size of ../../acisf13118/products/events/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src3_src.evt.gz[events] = 110 counts
[Tue Sep 27 16:53:21 2011] Mean chipx,y = (939.04, 742.67)
[Tue Sep 27 16:53:21 2011] Mean tdetx,y = (4856.04, 2444.67)
[Tue Sep 27 16:53:21 2011] chipx,y range = (918.00-961.00, 718.00-768.00)
[Tue Sep 27 16:53:21 2011] Size of ../../acisf13118/products/events/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 187 counts
[Tue Sep 27 16:53:21 2011] ../../acisf13118/products/images/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src3_src.img and ../../acisf13118/products/images/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Sep 27 16:53:21 2011] ../../acisf13118/products/spectra/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src3_src.pi and ../../acisf13118/products/spectra/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Sep 27 16:53:21 2011] Not generating rmf since there are only 82 counts
[Tue Sep 27 16:53:25 2011] ../../acisf13118/products/lightcurves/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src3_src.lc and ../../acisf13118/products/lightcurves/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Sep 27 16:54:40 2011] 206.497
[Tue Sep 27 16:54:44 2011] Updating aperture counts using extracted products
[Tue Sep 27 16:54:44 2011] Error reading totcts from fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Sep 27 16:54:44 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 16:54:44 2011] Using photon index=1.80, rate=0.00185, arf fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src3.arf
[Tue Sep 27 16:54:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 16:54:44 2011] Updating source flux to 1.5e-14
[Tue Sep 27 16:55:04 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting