[Tue Sep 27 16:50:22 2011] Detection parameters:
  Position = (952.5, 790.8) = 14 14 55.28 36 14 37.4
  Extent = 1.1" x 0.7", rotation angle = 175 degrees
  Source counts = 41.7 +/- 6.8
  Background counts = 4.3
  Rate = 0.0009 +/- 0.0002

[Tue Sep 27 16:50:23 2011] Off-axis axis estimate = 5.12'
[Tue Sep 27 16:51:14 2011] Using EEF radius (= 1.23 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 16:51:14 2011] Initial guess for spatial extent in simple fitting = 1.23"
[Tue Sep 27 16:51:14 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Tue Sep 27 16:51:14 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 1.23"
[Tue Sep 27 16:51:15 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass0_src11.ximg exists
[Tue Sep 27 16:51:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13118_pi14-548_cl_pass0_src11.csv
[Tue Sep 27 16:51:15 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass0_src11_1.ximg exists
[Tue Sep 27 16:51:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13118_pi14-548_cl_pass0_src11.csv
[Tue Sep 27 16:51:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13118_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13118_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 16:51:15 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Tue Sep 27 16:51:15 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Sep 27 16:51:15 2011] Fit fullrun_ccd7_acisf13118_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Sep 27 16:51:25 2011] Spatial fit model total counts = 47.999500, observed total counts = 48.000000
[Tue Sep 27 16:51:25 2011] Offset between fit and detection position for source 14 = 0.712873 pixels
[Tue Sep 27 16:51:25 2011] 48.619900 total counts/ 10.417300 bgd. counts: snr = 11.836283
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.712873 pixels
  Position = (952.5, 791.5) = 14 14 55.30 36 14 37.5
  Extent = 1.0 (0.8-1.4)", rotation angle = 0
  Source counts = 38.2 +/- 7.0
  Background counts = 10.4
  Rate = 0.0009 +/- 0.0002
[Tue Sep 27 16:51:25 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 16:51:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 16:51:25 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 16:51:25 2011] Source does appear to be extended
[Tue Sep 27 16:51:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 16:51:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 16:51:41 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Tue Sep 27 16:51:41 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.939
[Tue Sep 27 16:51:41 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 1.02"
[Tue Sep 27 16:51:42 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass1_src11.ximg exists
[Tue Sep 27 16:51:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13118_pi14-548_cl_pass1_src11.csv
[Tue Sep 27 16:51:42 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass1_src11_1.ximg exists
[Tue Sep 27 16:51:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13118_pi14-548_cl_pass1_src11.csv
[Tue Sep 27 16:51:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13118_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13118_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 16:51:43 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Tue Sep 27 16:51:43 2011] fullrun_ccd7_acisf13118_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Sep 27 16:51:43 2011] Fit fullrun_ccd7_acisf13118_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Sep 27 16:51:51 2011] Spatial fit model total counts = 47.991600, observed total counts = 48.000000
[Tue Sep 27 16:51:51 2011] Offset between fit and detection position for source 14 = 0.009908 pixels
[Tue Sep 27 16:51:51 2011] 48.605900 total counts/ 10.086500 bgd. counts: snr = 12.128561
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.009908 pixels
  Position = (952.5, 791.5) = 14 14 55.30 36 14 37.5
  Extent = 1.0 (0.8-1.4)", rotation angle = 0
  Source counts = 38.5 +/- 7.0
  Background counts = 10.1
  Rate = 0.0009 +/- 0.0002
[Tue Sep 27 16:51:51 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 16:51:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 16:51:51 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 16:51:51 2011] Source does appear to be extended
[Tue Sep 27 16:51:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 16:53:14 2011] Not overwriting source region fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src14_src.reg
[Tue Sep 27 16:53:14 2011] Extracting stamp from image fullrun_ccd7_acisf13118_pi14-548_cl_sm2.00.img.gz, (905, 744) - (1000, 839)
[Tue Sep 27 16:53:14 2011] Writing fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src14.gif
[Tue Sep 27 16:53:46 2011] ../../acisf13118/products/events/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src14_src.evt and ../../acisf13118/products/events/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Tue Sep 27 16:53:46 2011] Size of ../../acisf13118/products/events/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src14_src.evt.gz[events] = 49 counts
[Tue Sep 27 16:53:46 2011] Mean chipx,y = (743.41, 769.90)
[Tue Sep 27 16:53:46 2011] Mean tdetx,y = (4660.41, 2471.90)
[Tue Sep 27 16:53:46 2011] chipx,y range = (727.00-762.00, 751.00-791.00)
[Tue Sep 27 16:53:46 2011] Size of ../../acisf13118/products/events/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 56 counts
[Tue Sep 27 16:53:46 2011] ../../acisf13118/products/images/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src14_src.img and ../../acisf13118/products/images/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Tue Sep 27 16:53:46 2011] ../../acisf13118/products/spectra/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src14_src.pi and ../../acisf13118/products/spectra/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Tue Sep 27 16:53:46 2011] Not generating rmf since there are only 38 counts
[Tue Sep 27 16:53:50 2011] ../../acisf13118/products/lightcurves/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src14_src.lc and ../../acisf13118/products/lightcurves/fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Tue Sep 27 16:54:41 2011] 218.372
[Tue Sep 27 16:54:44 2011] Updating aperture counts using extracted products
[Tue Sep 27 16:54:44 2011] Error reading totcts from fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src14_src.pi.gz
[Tue Sep 27 16:54:44 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 16:54:44 2011] Using photon index=1.80, rate=0.000863, arf fullrun_ccd7_acisf13118_pi14-548_pass1_cl_src14.arf
[Tue Sep 27 16:54:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 16:54:44 2011] Updating source flux to 6.8e-15
[Tue Sep 27 16:55:04 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting