[Mon Oct 31 14:21:44 2011] Detection parameters:
  Position = (749.5, 140.5) = 6 0 27.56 -52 52 15.4
  Extent = 0.6" x 0.5", rotation angle = 58 degrees
  Source counts = 10.6 +/- 3.7
  Background counts = 3.4
  Rate = 0.0004 +/- 0.0002

[Mon Oct 31 14:21:44 2011] Off-axis axis estimate = 9.56'
[Mon Oct 31 14:22:24 2011] Using EEF radius (= 4.04 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 14:22:24 2011] Initial guess for spatial extent in simple fitting = 4.04"
[Mon Oct 31 14:22:24 2011] source mask rpix=8.2, npix_max = 303, mask sum = 253, frac = 0.833
[Mon Oct 31 14:22:24 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 4.04"
[Mon Oct 31 14:22:25 2011] fullrun_ccd1_acisf13116_pi14-548_cl_pass0_src5.ximg exists
[Mon Oct 31 14:22:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13116_pi14-548_cl_pass0_src5.csv
[Mon Oct 31 14:22:25 2011] fullrun_ccd1_acisf13116_pi14-548_cl_pass0_src5_1.ximg exists
[Mon Oct 31 14:22:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13116_pi14-548_cl_pass0_src5.csv
[Mon Oct 31 14:22:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13116_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13116_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 14:22:25 2011] fullrun_ccd1_acisf13116_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Mon Oct 31 14:22:25 2011] fullrun_ccd1_acisf13116_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Oct 31 14:22:25 2011] Fit fullrun_ccd1_acisf13116_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Oct 31 14:22:32 2011] Spatial fit model total counts = 29.362900, observed total counts = 29.000000
[Mon Oct 31 14:22:32 2011] Offset between fit and detection position for source 4 = 2.994270 pixels
[Mon Oct 31 14:22:32 2011] 29.186910 total counts/ 9.478710 bgd. counts: snr = 6.401361
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 2.994270 pixels
  Position = (752.4, 139.7) = 6 0 27.43 -52 52 16.0
  Extent = 3.1 (1.7-3.8)", rotation angle = 0
  Source counts = 19.7 +/- 5.4
  Background counts = 9.5
  Rate = 0.0008 +/- 0.0002
[Mon Oct 31 14:22:32 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 14:22:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 14:22:32 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 14:22:32 2011] Source does appear to be extended
[Mon Oct 31 14:22:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 14:22:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 14:22:49 2011] Initial guess for spatial extent in simple fitting = 3.13"
[Mon Oct 31 14:22:49 2011] source mask rpix=6.4, npix_max = 188, mask sum = 153, frac = 0.811
[Mon Oct 31 14:22:49 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 3.13"
[Mon Oct 31 14:22:50 2011] fullrun_ccd1_acisf13116_pi14-548_cl_pass1_src4.ximg exists
[Mon Oct 31 14:22:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13116_pi14-548_cl_pass1_src4.csv
[Mon Oct 31 14:22:50 2011] fullrun_ccd1_acisf13116_pi14-548_cl_pass1_src4_1.ximg exists
[Mon Oct 31 14:22:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf13116_pi14-548_cl_pass1_src4.csv
[Mon Oct 31 14:22:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf13116_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf13116_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 14:22:50 2011] fullrun_ccd1_acisf13116_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Mon Oct 31 14:22:50 2011] fullrun_ccd1_acisf13116_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Oct 31 14:22:50 2011] Fit fullrun_ccd1_acisf13116_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Mon Oct 31 14:22:56 2011] Spatial fit model total counts = 24.455000, observed total counts = 24.000000
[Mon Oct 31 14:22:56 2011] Offset between fit and detection position for source 4 = 4.174317 pixels
[Mon Oct 31 14:22:56 2011] 24.409231 total counts/ 24.405900 bgd. counts: snr = 0.000674
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 4.174317 pixels
  Position = (750.3, 136.1) = 6 0 27.55 -52 52 17.8
  Extent = 6.3 (1.2-12.5)", rotation angle = 0
  Source counts = 0.0 +/- 4.9
  Background counts = 24.4
  Rate = 1e-07 +/- 0.0002
  Deleting source due to low Poisson probability