[Mon Oct 24 00:36:22 2011] Detection parameters:
  Position = (1133.7, 700.3) = 21 44 3.86 19 28 12.7
  Extent = 0.5" x 0.5", rotation angle = 126 degrees
  Source counts = 169.9 +/- 13.1
  Background counts = 1.1
  Rate = 0.003 +/- 0.0002

[Mon Oct 24 00:36:25 2011] Off-axis axis estimate = 1.94'
[Mon Oct 24 00:37:17 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 00:37:17 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Mon Oct 24 00:37:17 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.213
[Mon Oct 24 00:37:17 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.42"
[Mon Oct 24 00:37:18 2011] fullrun_ccd3_acisf13024_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 00:37:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13024_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 00:37:18 2011] fullrun_ccd3_acisf13024_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 00:37:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13024_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 00:37:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13024_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13024_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 00:37:18 2011] fullrun_ccd3_acisf13024_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 00:37:18 2011] fullrun_ccd3_acisf13024_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 00:37:18 2011] Fit fullrun_ccd3_acisf13024_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 00:37:30 2011] Spatial fit model total counts = 169.810000, observed total counts = 171.000000
[Mon Oct 24 00:37:30 2011] Offset between fit and detection position for source 1 = 0.664953 pixels
[Mon Oct 24 00:37:30 2011] 170.544387 total counts/ 0.817387 bgd. counts: snr = 187.731466
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.664953 pixels
  Position = (1134.2, 700.7) = 21 44 3.86 19 28 12.7
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 169.7 +/- 13.1
  Background counts = 0.8
  Rate = 0.003 +/- 0.0002
[Mon Oct 24 00:37:30 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 00:37:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 00:37:30 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 00:37:30 2011] Source does appear to be extended
[Mon Oct 24 00:37:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 00:37:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 00:37:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 00:37:49 2011] Initial guess for spatial extent in simple fitting = 0.51"
[Mon Oct 24 00:37:49 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.952
[Mon Oct 24 00:37:49 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.51"
[Mon Oct 24 00:37:50 2011] fullrun_ccd3_acisf13024_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 00:37:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13024_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 00:37:50 2011] fullrun_ccd3_acisf13024_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 00:37:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13024_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 00:37:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13024_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13024_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 00:37:50 2011] fullrun_ccd3_acisf13024_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 00:37:50 2011] fullrun_ccd3_acisf13024_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 00:37:50 2011] Fit fullrun_ccd3_acisf13024_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 00:38:01 2011] Spatial fit model total counts = 167.575000, observed total counts = 171.000000
[Mon Oct 24 00:38:01 2011] Offset between fit and detection position for source 1 = 0.003300 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.003300 pixels
  Position = (1134.2, 700.7) = 21 44 3.86 19 28 12.7
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 168.5 +/- 13.0
  Background counts = 0.0
  Rate = 0.003 +/- 0.0002
[Mon Oct 24 00:38:01 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 00:38:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 00:38:01 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 00:38:01 2011] Source does appear to be extended
[Mon Oct 24 00:38:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 00:40:35 2011] Not overwriting source region fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 24 00:40:35 2011] Extracting stamp from image fullrun_ccd3_acisf13024_pi14-548_cl_sm2.00.img.gz, (1110, 677) - (1158, 724)
[Mon Oct 24 00:40:35 2011] Writing fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1.gif
[Mon Oct 24 00:40:36 2011] ../../acisf13024/products/events/fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1_src.evt and ../../acisf13024/products/events/fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 24 00:40:36 2011] Size of ../../acisf13024/products/events/fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1_src.evt.gz[events] = 169 counts
[Mon Oct 24 00:40:36 2011] Mean chipx,y = (717.41, 1001.04)
[Mon Oct 24 00:40:36 2011] Mean tdetx,y = (4130.96, 3778.41)
[Mon Oct 24 00:40:36 2011] chipx,y range = (698.00-736.00, 982.00-1020.00)
[Mon Oct 24 00:40:36 2011] Size of ../../acisf13024/products/events/fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 8 counts
[Mon Oct 24 00:40:36 2011] ../../acisf13024/products/images/fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1_src.img and ../../acisf13024/products/images/fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 24 00:40:36 2011] ../../acisf13024/products/spectra/fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1_src.pi and ../../acisf13024/products/spectra/fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 24 00:40:39 2011] ../../acisf13024/products/lightcurves/fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1_src.lc and ../../acisf13024/products/lightcurves/fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 24 00:41:23 2011] Keeping rmf generated by specextract
[Mon Oct 24 00:41:23 2011] 195.985
[Mon Oct 24 00:41:33 2011] Updating aperture counts using extracted products
[Mon Oct 24 00:41:33 2011] Error reading totcts from fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 24 00:41:34 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 00:41:34 2011] Using photon index=1.80, rate=0.00309, arf fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1.arf
[Mon Oct 24 00:41:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 00:41:34 2011] Updating source flux to 3.6e-14
[Mon Oct 24 00:41:55 2011] Reading fit data from acisf13024/analysis//spectral/fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1_pl.csv
[Mon Oct 24 00:41:55 2011] Spectral fit parameter nH value = 2.95922e+21
[Mon Oct 24 00:41:55 2011] Spectral fit parameter PhoIndex value = 1.87916
[Mon Oct 24 00:41:55 2011] Failed to get F(0.3-8.0) from acisf13024/analysis//spectral/fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Oct 24 00:41:55 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 00:41:55 2011] Using Nh = 3e+21, photon index=1.88, rate=0.00309, arf fullrun_ccd3_acisf13024_pi14-548_pass1_cl_src1.arf
[Mon Oct 24 00:41:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 00:41:55 2011] Updating source flux to 3.6e-14