[Fri Oct  7 07:54:07 2011] Detection parameters:
  Position = (600.4, 932.1) = 15 55 41.70 66 18 6.4
  Extent = 0.5" x 0.5", rotation angle = 99 degrees
  Source counts = 18.4 +/- 4.4
  Background counts = 0.6
  Rate = 0.0007 +/- 0.0002

[Fri Oct  7 07:54:08 2011] Off-axis axis estimate = 2.81'
[Fri Oct  7 07:56:07 2011] Using EEF radius (= 0.54 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 07:56:07 2011] Initial guess for spatial extent in simple fitting = 0.54"
[Fri Oct  7 07:56:07 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.162
[Fri Oct  7 07:56:07 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.54"
[Fri Oct  7 08:07:26 2011] fullrun_ccd0_acisf13023_pi14-548_cl_pass0_src4.ximg exists
[Fri Oct  7 08:07:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13023_pi14-548_cl_pass0_src4.csv
[Fri Oct  7 08:07:26 2011] fullrun_ccd0_acisf13023_pi14-548_cl_pass0_src4_1.ximg exists
[Fri Oct  7 08:07:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13023_pi14-548_cl_pass0_src4.csv
[Fri Oct  7 08:07:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13023_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13023_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 08:07:26 2011] fullrun_ccd0_acisf13023_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Fri Oct  7 08:07:26 2011] fullrun_ccd0_acisf13023_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Oct  7 08:07:26 2011] Fit fullrun_ccd0_acisf13023_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Oct  7 08:39:38 2011] Spatial fit model total counts = 17.483800, observed total counts = 19.000000
[Fri Oct  7 08:39:38 2011] Offset between fit and detection position for source 6 = 0.672224 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.672224 pixels
  Position = (601.1, 932.3) = 15 55 41.69 66 18 6.3
  Extent = 0.5" x 0.3", rotation angle = 106
  Source counts = 17.8 +/- 4.2
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Fri Oct  7 08:39:38 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 08:39:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 08:39:38 2011] Assessing source extent using major
[Fri Oct  7 08:39:38 2011] Source does appear to be extended
[Fri Oct  7 08:39:38 2011] Computing asymmetry using major and minor axis, asym = 1.64
[Fri Oct  7 08:39:38 2011] Source is asymmetric
[Fri Oct  7 08:39:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 08:39:58 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Fri Oct  7 08:39:58 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.837
[Fri Oct  7 08:39:58 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.41"
[Fri Oct  7 08:52:19 2011] fullrun_ccd0_acisf13023_pi14-548_cl_pass1_src4.ximg exists
[Fri Oct  7 08:52:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13023_pi14-548_cl_pass1_src4.csv
[Fri Oct  7 08:52:19 2011] fullrun_ccd0_acisf13023_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Oct  7 08:52:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf13023_pi14-548_cl_pass1_src4.csv
[Fri Oct  7 08:52:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf13023_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf13023_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 08:52:19 2011] fullrun_ccd0_acisf13023_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Oct  7 08:52:19 2011] fullrun_ccd0_acisf13023_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Oct  7 08:52:19 2011] Fit fullrun_ccd0_acisf13023_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Oct  7 09:19:15 2011] Spatial fit model total counts = 16.050000, observed total counts = 19.000000
[Fri Oct  7 09:19:15 2011] Offset between fit and detection position for source 6 = 0.047064 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.047064 pixels
  Position = (601.1, 932.3) = 15 55 41.69 66 18 6.3
  Extent = 0.5" x 0.3", rotation angle = 109
  Source counts = 16.2 +/- 4.0
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Fri Oct  7 09:19:15 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 09:19:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 09:19:15 2011] Assessing source extent using major
[Fri Oct  7 09:19:15 2011] Source does appear to be extended
[Fri Oct  7 09:19:15 2011] Computing asymmetry using major and minor axis, asym = 1.64
[Fri Oct  7 09:19:15 2011] Source is asymmetric
[Fri Oct  7 09:19:29 2011] Writing source region out to fullrun_ccd0_acisf13023_pi14-548_pass1_cl_src6_src.reg
[Fri Oct  7 09:19:29 2011] Extracting stamp from image fullrun_ccd0_acisf13023_pi14-548_cl_sm2.00.img.gz, (577, 908) - (625, 957)
[Fri Oct  7 09:19:29 2011] Writing fullrun_ccd0_acisf13023_pi14-548_pass1_cl_src6.gif
[Fri Oct  7 09:22:22 2011] Size of ../../acisf13023/products/events/fullrun_ccd0_acisf13023_pi14-548_pass1_cl_src6_src.evt.gz[events] = 18 counts
[Fri Oct  7 09:22:22 2011] Mean chipx,y = (439.28, 886.72)
[Fri Oct  7 09:22:22 2011] Mean tdetx,y = (3947.72, 4692.72)
[Fri Oct  7 09:22:22 2011] chipx,y range = (424.00-455.00, 870.00-902.00)
[Fri Oct  7 09:22:22 2011] Size of ../../acisf13023/products/events/fullrun_ccd0_acisf13023_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 2 counts
[Fri Oct  7 09:22:24 2011] Not generating rmf since there are only 16 counts
[Fri Oct  7 09:22:24 2011] arf not found, will run specextract
[Fri Oct  7 09:22:50 2011] ../../acisf13023/products/spectra/fullrun_ccd0_acisf13023_pi14-548_pass1_cl_src6.warf not found
[Fri Oct  7 09:22:50 2011] ../../acisf13023/products/spectra/fullrun_ccd0_acisf13023_pi14-548_pass1_cl_src6.wrmf not found
[Fri Oct  7 09:22:50 2011] Removal of ../../acisf13023/products/spectra/fullrun_ccd0_acisf13023_pi14-548_pass1_cl_src6.soff failed
[Fri Oct  7 09:26:33 2011] Spectrum 6 has only 16 counts, deleting rmf
[Fri Oct  7 09:26:33 2011] 196.533
[Fri Oct  7 09:41:54 2011] Updating aperture counts using extracted products
[Fri Oct  7 09:41:54 2011] Error reading totcts from fullrun_ccd0_acisf13023_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Oct  7 09:41:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 09:41:54 2011] Using photon index=1.80, rate=0.000585, arf fullrun_ccd0_acisf13023_pi14-548_pass1_cl_src6.arf
[Fri Oct  7 09:41:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 09:41:54 2011] Updating source flux to 7.1e-15
[Fri Oct  7 09:41:56 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct  7 09:41:57 2011] acisf13023/analysis//spectral/fullrun_ccd0_acisf13023_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete