[Sat Sep 24 01:50:10 2011] Detection parameters:
  Position = (810.5, 158.5) = 15 57 12.58 66 22 19.6
  Extent = 0.7" x 0.5", rotation angle = 115 degrees
  Source counts = 42.9 +/- 6.9
  Background counts = 4.1
  Rate = 0.001 +/- 0.0002

[Sat Sep 24 01:50:10 2011] Off-axis axis estimate = 5.96'
[Sat Sep 24 02:42:15 2011] Using EEF radius (= 1.61 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 02:42:15 2011] Initial guess for spatial extent in simple fitting = 1.61"
[Sat Sep 24 02:42:15 2011] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.859
[Sat Sep 24 02:42:15 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.61"
[Sat Sep 24 03:19:41 2011] fullrun_ccd3_acisf13020_pi14-548_cl_pass0_src6.ximg exists
[Sat Sep 24 03:19:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13020_pi14-548_cl_pass0_src6.csv
[Sat Sep 24 03:19:41 2011] fullrun_ccd3_acisf13020_pi14-548_cl_pass0_src6_1.ximg exists
[Sat Sep 24 03:19:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13020_pi14-548_cl_pass0_src6.csv
[Sat Sep 24 03:19:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13020_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13020_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 03:19:41 2011] fullrun_ccd3_acisf13020_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sat Sep 24 03:19:41 2011] fullrun_ccd3_acisf13020_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Sep 24 03:19:41 2011] Fit fullrun_ccd3_acisf13020_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Sep 24 03:19:52 2011] Spatial fit model total counts = 79.519000, observed total counts = 80.000000
[Sat Sep 24 03:19:52 2011] Offset between fit and detection position for source 16 = 3.834193 pixels
[Sat Sep 24 03:19:52 2011] 78.813238 total counts/ 0.061138 bgd. counts: snr = 318.497087
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 3.834193 pixels
  Position = (811.1, 162.3) = 15 57 12.58 66 22 21.2
  Extent = 2.0 (1.6-2.4)", rotation angle = 0
  Source counts = 78.8 +/- 8.9
  Background counts = 0.1
  Rate = 0.002 +/- 0.0002
[Sat Sep 24 03:19:52 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 03:19:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 03:19:52 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 03:19:52 2011] Source does appear to be extended
[Sat Sep 24 03:19:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 03:56:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 03:56:44 2011] Initial guess for spatial extent in simple fitting = 2.03"
[Sat Sep 24 03:56:44 2011] source mask rpix=4.1, npix_max = 85, mask sum = 90, frac = 1.052
[Sat Sep 24 03:56:44 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 2.03"
[Sat Sep 24 04:29:19 2011] fullrun_ccd3_acisf13020_pi14-548_cl_pass1_src6.ximg exists
[Sat Sep 24 04:29:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13020_pi14-548_cl_pass1_src6.csv
[Sat Sep 24 04:29:19 2011] fullrun_ccd3_acisf13020_pi14-548_cl_pass1_src6_1.ximg exists
[Sat Sep 24 04:29:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13020_pi14-548_cl_pass1_src6.csv
[Sat Sep 24 04:29:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13020_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13020_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 04:29:19 2011] fullrun_ccd3_acisf13020_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sat Sep 24 04:29:19 2011] fullrun_ccd3_acisf13020_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Sep 24 04:29:19 2011] Fit fullrun_ccd3_acisf13020_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Sep 24 04:29:35 2011] Spatial fit model total counts = 86.546700, observed total counts = 87.000000
[Sat Sep 24 04:29:35 2011] Offset between fit and detection position for source 16 = 0.298740 pixels
[Sat Sep 24 04:29:35 2011] 86.165660 total counts/ 1.326660 bgd. counts: snr = 73.657288
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.298740 pixels
  Position = (810.8, 162.1) = 15 57 12.60 66 22 21.2
  Extent = 2.0 (1.7-2.3)", rotation angle = 0
  Source counts = 84.8 +/- 9.3
  Background counts = 1.3
  Rate = 0.002 +/- 0.0002
[Sat Sep 24 04:29:35 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 04:29:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 04:29:35 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 04:29:35 2011] Source does appear to be extended
[Sat Sep 24 04:29:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 04:54:14 2011] Writing source region out to fullrun_ccd3_acisf13020_pi14-548_pass1_cl_src16_src.reg
[Sat Sep 24 04:54:14 2011] Extracting stamp from image fullrun_ccd3_acisf13020_pi14-548_cl_sm2.00.img.gz, (718, 69) - (903, 255)
[Sat Sep 24 04:54:15 2011] Writing fullrun_ccd3_acisf13020_pi14-548_pass1_cl_src16.gif
[Sat Sep 24 04:57:51 2011] Size of ../../acisf13020/products/events/fullrun_ccd3_acisf13020_pi14-548_pass1_cl_src16_src.evt.gz[events] = 93 counts
[Sat Sep 24 04:57:51 2011] Mean chipx,y = (599.57, 1004.39)
[Sat Sep 24 04:57:51 2011] Mean tdetx,y = (4127.61, 3660.57)
[Sat Sep 24 04:57:51 2011] chipx,y range = (574.00-625.00, 985.00-1022.00)
[Sat Sep 24 04:57:51 2011] Size of ../../acisf13020/products/events/fullrun_ccd3_acisf13020_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 63 counts
[Sat Sep 24 04:57:52 2011] Not generating rmf since there are only 84 counts
[Sat Sep 24 04:57:52 2011] arf not found, will run specextract
[Sat Sep 24 04:58:22 2011] ../../acisf13020/products/spectra/fullrun_ccd3_acisf13020_pi14-548_pass1_cl_src16.warf not found
[Sat Sep 24 04:58:22 2011] ../../acisf13020/products/spectra/fullrun_ccd3_acisf13020_pi14-548_pass1_cl_src16.wrmf not found
[Sat Sep 24 04:58:22 2011] Removal of ../../acisf13020/products/spectra/fullrun_ccd3_acisf13020_pi14-548_pass1_cl_src16.soff failed
[Sat Sep 24 05:04:13 2011] Spectrum 16 has only 85 counts, deleting rmf
[Sat Sep 24 05:04:13 2011] 125.684
[Sat Sep 24 05:04:18 2011] Updating aperture counts using extracted products
[Sat Sep 24 05:04:18 2011] Error reading totcts from fullrun_ccd3_acisf13020_pi14-548_pass1_cl_src16_src.pi.gz
[Sat Sep 24 05:04:18 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 05:04:18 2011] Using photon index=1.80, rate=0.00204, arf fullrun_ccd3_acisf13020_pi14-548_pass1_cl_src16.arf
[Sat Sep 24 05:04:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 05:04:18 2011] Updating source flux to 3.7e-14
[Sat Sep 24 05:04:47 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Sep 24 05:04:48 2011] acisf13020/analysis//spectral/fullrun_ccd3_acisf13020_pi14-548_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete