[Wed Apr 11 00:30:56 2012] Detection parameters:
  Position = (965.4, 880.1) = 9 56 43.79 69 40 23.5
  Extent = 0.6" x 0.5", rotation angle = 36 degrees
  Source counts = 19.7 +/- 4.5
  Background counts = 0.3
  Rate = 0.001 +/- 0.0003

[Wed Apr 11 00:30:57 2012] Off-axis axis estimate = 4.27'
[Wed Apr 11 00:32:09 2012] Using EEF radius (= 0.91 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 00:32:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 11 00:32:09 2012] Initial guess for spatial extent in simple fitting = 0.91"
[Wed Apr 11 00:32:09 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.898
[Wed Apr 11 00:32:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.91"
[Wed Apr 11 00:32:09 2012] fullrun_ccd0_acisf01302_pi14-548_cl_pass0_src1.ximg exists
[Wed Apr 11 00:32:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01302_pi14-548_cl_pass0_src1.csv
[Wed Apr 11 00:32:09 2012] fullrun_ccd0_acisf01302_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Apr 11 00:32:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01302_pi14-548_cl_pass0_src1.csv
[Wed Apr 11 00:32:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01302_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01302_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 00:32:10 2012] fullrun_ccd0_acisf01302_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Apr 11 00:32:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01302_pi14-548_cl_pass0_tfrozen_src1.csv
[Wed Apr 11 00:32:10 2012] fullrun_ccd0_acisf01302_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Apr 11 00:32:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01302_pi14-548_cl_pass0_tfrozen_src1.csv
[Wed Apr 11 00:32:10 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01302_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01302_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 00:32:25 2012] Spatial fit model total counts = 17.503400, observed total counts = 22.000000
[Wed Apr 11 00:32:25 2012] Offset between fit and detection position for source 2 = 1.239038 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.239038 pixels
  Position = (966.5, 880.7) = 9 56 43.73 69 40 23.6
  Extent = 1.1" x 0.5", rotation angle = 334
  Source counts = 18.7 +/- 4.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Wed Apr 11 00:32:25 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 00:32:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 00:32:25 2012] Assessing source extent using major
[Wed Apr 11 00:32:25 2012] Source does appear to be extended
[Wed Apr 11 00:32:25 2012] Computing asymmetry using major and minor axis, asym = 2.01
[Wed Apr 11 00:32:25 2012] Source is asymmetric
[Wed Apr 11 00:32:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 00:32:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 11 00:32:53 2012] Initial guess for spatial extent in simple fitting = 0.83"
[Wed Apr 11 00:32:53 2012] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.316
[Wed Apr 11 00:32:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.83"
[Wed Apr 11 00:32:54 2012] fullrun_ccd0_acisf01302_pi14-548_cl_pass1_src1.ximg exists
[Wed Apr 11 00:32:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01302_pi14-548_cl_pass1_src1.csv
[Wed Apr 11 00:32:54 2012] fullrun_ccd0_acisf01302_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Apr 11 00:32:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf01302_pi14-548_cl_pass1_src1.csv
[Wed Apr 11 00:32:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf01302_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf01302_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 00:32:54 2012] fullrun_ccd0_acisf01302_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Apr 11 00:32:54 2012] fullrun_ccd0_acisf01302_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Apr 11 00:32:54 2012] Fit fullrun_ccd0_acisf01302_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Apr 11 00:33:05 2012] Spatial fit model total counts = 20.174700, observed total counts = 22.000000
[Wed Apr 11 00:33:05 2012] Offset between fit and detection position for source 2 = 0.558368 pixels
[Wed Apr 11 00:33:05 2012] 21.001390 total counts/ 2.692990 bgd. counts: snr = 11.156630
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.558368 pixels
  Position = (966.0, 880.6) = 9 56 43.78 69 40 23.5
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 18.3 +/- 4.6
  Background counts = 2.7
  Rate = 0.001 +/- 0.0003
[Wed Apr 11 00:33:05 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 00:33:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 00:33:05 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 00:33:05 2012] Source does appear to be extended
[Wed Apr 11 00:33:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 00:33:33 2012] Not overwriting source region fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2_src.reg
[Wed Apr 11 00:33:33 2012] Extracting stamp from image fullrun_ccd0_acisf01302_pi14-548_cl_sm2.00.img.gz, (931, 846) - (1001, 915)
[Wed Apr 11 00:33:33 2012] Writing fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2.gif
[Wed Apr 11 00:33:35 2012] ../../acisf01302/products/events/fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2_src.evt and ../../acisf01302/products/events/fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Apr 11 00:33:35 2012] Size of ../../acisf01302/products/events/fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2_src.evt.gz[events] = 19 counts
[Wed Apr 11 00:33:35 2012] Mean chipx,y = (790.11, 655.05)
[Wed Apr 11 00:33:35 2012] Mean tdetx,y = (3716.05, 4341.89)
[Wed Apr 11 00:33:35 2012] chipx,y range = (770.00-805.00, 637.00-670.00)
[Wed Apr 11 00:33:35 2012] Size of ../../acisf01302/products/events/fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 4 counts
[Wed Apr 11 00:33:35 2012] ../../acisf01302/products/images/fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2_src.img and ../../acisf01302/products/images/fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Apr 11 00:33:35 2012] Not generating rmf since there are only 18 counts
[Wed Apr 11 00:33:41 2012] ../../acisf01302/products/spectra/fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2_bkg.pi not found
[Wed Apr 11 00:33:41 2012] ../../acisf01302/products/spectra/fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2.warf not found
[Wed Apr 11 00:33:41 2012] ../../acisf01302/products/spectra/fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2.wrmf not found
[Wed Apr 11 00:33:41 2012] Removal of ../../acisf01302/products/spectra/fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2.soff failed
[Wed Apr 11 00:33:41 2012] Failed to rename ../../acisf01302/products/spectra/fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2_grp.pi to ../../acisf01302/products/spectra/fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2_src.pi
[Wed Apr 11 00:33:47 2012] ../../acisf01302/products/lightcurves/fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2_src.lc and ../../acisf01302/products/lightcurves/fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Apr 11 00:36:38 2012] 190.38
[Wed Apr 11 00:46:48 2012] Updating aperture counts using extracted products
[Wed Apr 11 00:46:48 2012] Error reading totcts from fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2_src.pi
[Wed Apr 11 00:46:49 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 00:46:49 2012] Using photon index=1.80, rate=0.00118, arf fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2.arf
[Wed Apr 11 00:46:49 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Apr 11 00:46:49 2012] Updating source flux to 1.2e-14
[Wed Apr 11 00:46:53 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Apr 11 00:46:54 2012] acisf01302/analysis//spectral/fullrun_ccd0_acisf01302_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete