[Tue Apr 10 05:43:00 2012] Detection parameters:
  Position = (454.1, 976.9) = 17 45 25.58 -29 0 28.7
  Extent = 0.5" x 0.5", rotation angle = 123 degrees
  Source counts = 18.6 +/- 4.5
  Background counts = 1.4
  Rate = 0.001 +/- 0.0003

[Tue Apr 10 05:43:00 2012] Off-axis axis estimate = 3.07'
[Tue Apr 10 06:35:22 2012] Using EEF radius (= 0.59 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 06:35:22 2012] Initial guess for spatial extent in simple fitting = 0.59"
[Tue Apr 10 06:35:22 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.375
[Tue Apr 10 06:35:22 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 0.59"
[Tue Apr 10 07:07:19 2012] fullrun_ccd3_acisf13017_pi14-548_cl_pass0_src16.ximg exists
[Tue Apr 10 07:07:19 2012] fullrun_ccd3_acisf13017_pi14-548_cl_pass0_src16_1.ximg exists
[Tue Apr 10 07:07:19 2012] Fit fullrun_ccd3_acisf13017_pi14-548_cl_pass0_src16 appears to have run properly
[Tue Apr 10 07:07:19 2012] fullrun_ccd3_acisf13017_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Tue Apr 10 07:07:19 2012] fullrun_ccd3_acisf13017_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Apr 10 07:07:19 2012] Fit fullrun_ccd3_acisf13017_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Tue Apr 10 07:07:32 2012] Spatial fit model total counts = 21.686700, observed total counts = 23.000000
[Tue Apr 10 07:07:32 2012] Offset between fit and detection position for source 23 = 0.745022 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.745022 pixels
  Position = (454.6, 977.4) = 17 45 25.58 -29 0 28.7
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 20.6 +/- 4.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Tue Apr 10 07:07:32 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 07:07:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 07:07:32 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 07:07:32 2012] Source does appear to be extended
[Tue Apr 10 07:07:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 07:55:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 07:55:24 2012] Initial guess for spatial extent in simple fitting = 0.54"
[Tue Apr 10 07:55:24 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.883
[Tue Apr 10 07:55:24 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 0.54"
[Tue Apr 10 08:23:06 2012] fullrun_ccd3_acisf13017_pi14-548_cl_pass1_src15.ximg exists
[Tue Apr 10 08:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13017_pi14-548_cl_pass1_src15.csv
[Tue Apr 10 08:23:06 2012] fullrun_ccd3_acisf13017_pi14-548_cl_pass1_src15_1.ximg exists
[Tue Apr 10 08:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13017_pi14-548_cl_pass1_src15.csv
[Tue Apr 10 08:23:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13017_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13017_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 08:23:06 2012] fullrun_ccd3_acisf13017_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Tue Apr 10 08:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13017_pi14-548_cl_pass1_tfrozen_src15.csv
[Tue Apr 10 08:23:06 2012] fullrun_ccd3_acisf13017_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Apr 10 08:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf13017_pi14-548_cl_pass1_tfrozen_src15.csv
[Tue Apr 10 08:23:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf13017_pi14-548_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf13017_pi14-548_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 08:23:18 2012] Spatial fit model total counts = 20.648600, observed total counts = 23.000000
[Tue Apr 10 08:23:18 2012] Offset between fit and detection position for source 23 = 0.037080 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.037080 pixels
  Position = (454.6, 977.4) = 17 45 25.58 -29 0 28.7
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 19.5 +/- 4.4
  Background counts = 0.0
  Rate = 0.001 +/- 0.0002
[Tue Apr 10 08:23:18 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 08:23:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 08:23:18 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 08:23:18 2012] Source does appear to be extended
[Tue Apr 10 08:23:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 08:53:25 2012] Writing source region out to fullrun_ccd3_acisf13017_pi14-548_pass1_cl_src23_src.reg
[Tue Apr 10 08:53:25 2012] Extracting stamp from image fullrun_ccd3_acisf13017_pi14-548_cl_sm2.00.img.gz, (430, 953) - (479, 1002)
[Tue Apr 10 08:53:25 2012] Writing fullrun_ccd3_acisf13017_pi14-548_pass1_cl_src23.gif
[Tue Apr 10 09:02:01 2012] Size of ../../acisf13017/products/events/fullrun_ccd3_acisf13017_pi14-548_pass1_cl_src23_src.evt.gz[events] = 20 counts
[Tue Apr 10 09:02:01 2012] Mean chipx,y = (584.35, 947.50)
[Tue Apr 10 09:02:01 2012] Mean tdetx,y = (4184.50, 3645.35)
[Tue Apr 10 09:02:01 2012] chipx,y range = (568.00-604.00, 932.00-965.00)
[Tue Apr 10 09:02:01 2012] Size of ../../acisf13017/products/events/fullrun_ccd3_acisf13017_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 19 counts
[Tue Apr 10 09:02:02 2012] Not generating rmf since there are only 19 counts
[Tue Apr 10 09:02:02 2012] arf not found, will run specextract
[Tue Apr 10 09:02:37 2012] ../../acisf13017/products/spectra/fullrun_ccd3_acisf13017_pi14-548_pass1_cl_src23.warf not found
[Tue Apr 10 09:02:37 2012] ../../acisf13017/products/spectra/fullrun_ccd3_acisf13017_pi14-548_pass1_cl_src23.wrmf not found
[Tue Apr 10 09:02:37 2012] Removal of ../../acisf13017/products/spectra/fullrun_ccd3_acisf13017_pi14-548_pass1_cl_src23.soff failed
[Tue Apr 10 09:09:35 2012] Spectrum 23 has only 20 counts, deleting rmf
[Tue Apr 10 09:09:35 2012] 189.669
[Tue Apr 10 09:09:40 2012] Updating aperture counts using extracted products
[Tue Apr 10 09:09:40 2012] Error reading totcts from fullrun_ccd3_acisf13017_pi14-548_pass1_cl_src23_src.pi.gz
[Tue Apr 10 09:09:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 09:09:40 2012] Using photon index=1.80, rate=0.00109, arf fullrun_ccd3_acisf13017_pi14-548_pass1_cl_src23.arf
[Tue Apr 10 09:09:40 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 10 09:09:40 2012] Updating source flux to 1.8e-14
[Tue Apr 10 09:09:51 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting