[Sun Feb 26 02:53:40 2012] Detection parameters:
  Position = (362.0, 519.1) = 13 55 35.20 40 26 58.9
  Extent = 0.5" x 0.5", rotation angle = 36 degrees
  Source counts = 24.6 +/- 5.0
  Background counts = 0.4
  Rate = 0.005 +/- 0.0009

[Sun Feb 26 02:53:40 2012] Off-axis axis estimate = 1.40'
[Sun Feb 26 03:14:25 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 03:14:25 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Sun Feb 26 03:14:25 2012] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.602
[Sun Feb 26 03:14:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Sun Feb 26 03:20:04 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass0_src1.ximg exists
[Sun Feb 26 03:20:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13006_pi14-548_cl_pass0_src1.csv
[Sun Feb 26 03:20:04 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Feb 26 03:20:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13006_pi14-548_cl_pass0_src1.csv
[Sun Feb 26 03:20:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13006_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13006_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 03:20:04 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Feb 26 03:20:04 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Feb 26 03:20:04 2012] Fit fullrun_ccd7_acisf13006_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Feb 26 03:20:07 2012] Spatial fit model total counts = 27.897900, observed total counts = 28.000000
[Sun Feb 26 03:20:07 2012] Offset between fit and detection position for source 2 = 0.699939 pixels
[Sun Feb 26 03:20:07 2012] 28.175710 total counts/ 5.809210 bgd. counts: snr = 9.279819
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.699939 pixels
  Position = (362.4, 519.7) = 13 55 35.20 40 26 58.9
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 22.4 +/- 5.3
  Background counts = 5.8
  Rate = 0.004 +/- 0.001
[Sun Feb 26 03:20:07 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 03:20:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 03:20:07 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 03:20:07 2012] Source does appear to be extended
[Sun Feb 26 03:20:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 03:37:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 03:37:41 2012] Initial guess for spatial extent in simple fitting = 0.43"
[Sun Feb 26 03:37:41 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.196
[Sun Feb 26 03:37:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.43"
[Sun Feb 26 03:44:12 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass1_src1.ximg exists
[Sun Feb 26 03:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13006_pi14-548_cl_pass1_src1.csv
[Sun Feb 26 03:44:12 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Feb 26 03:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13006_pi14-548_cl_pass1_src1.csv
[Sun Feb 26 03:44:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13006_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13006_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 03:44:12 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Feb 26 03:44:12 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Feb 26 03:44:12 2012] Fit fullrun_ccd7_acisf13006_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Feb 26 03:44:16 2012] Spatial fit model total counts = 27.993600, observed total counts = 28.000000
[Sun Feb 26 03:44:16 2012] Offset between fit and detection position for source 2 = 0.008799 pixels
[Sun Feb 26 03:44:16 2012] 28.083800 total counts/ 5.571700 bgd. counts: snr = 9.537228
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.008799 pixels
  Position = (362.4, 519.7) = 13 55 35.20 40 26 58.9
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 22.5 +/- 5.3
  Background counts = 5.6
  Rate = 0.004 +/- 0.001
[Sun Feb 26 03:44:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 03:44:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 03:44:16 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 03:44:16 2012] Source does appear to be extended
[Sun Feb 26 03:44:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 03:51:42 2012] Writing source region out to fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src2_src.reg
[Sun Feb 26 03:51:42 2012] Extracting stamp from image fullrun_ccd7_acisf13006_pi14-548_cl_sm2.00.img.gz, (342, 500) - (383, 540)
[Sun Feb 26 03:51:42 2012] Writing fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src2.gif
[Sun Feb 26 03:51:44 2012] Size of ../../acisf13006/products/events/fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src2_src.evt.gz[events] = 23 counts
[Sun Feb 26 03:51:44 2012] Mean chipx,y = (350.57, 523.17)
[Sun Feb 26 03:51:44 2012] Mean tdetx,y = (4267.57, 2225.17)
[Sun Feb 26 03:51:44 2012] chipx,y range = (334.00-367.00, 506.00-539.00)
[Sun Feb 26 03:51:44 2012] Size of ../../acisf13006/products/events/fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 5 counts
[Sun Feb 26 03:51:45 2012] Not generating rmf since there are only 22 counts
[Sun Feb 26 03:51:45 2012] arf not found, will run specextract
[Sun Feb 26 03:51:53 2012] ../../acisf13006/products/spectra/fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src2.warf not found
[Sun Feb 26 03:51:53 2012] ../../acisf13006/products/spectra/fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src2.wrmf not found
[Sun Feb 26 03:51:53 2012] Removal of ../../acisf13006/products/spectra/fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src2.soff failed
[Sun Feb 26 03:55:54 2012] Spectrum 2 has only 23 counts, deleting rmf
[Sun Feb 26 03:55:54 2012] 234.078
[Sun Feb 26 03:55:56 2012] Updating aperture counts using extracted products
[Sun Feb 26 03:55:56 2012] Error reading totcts from fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Feb 26 03:55:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 03:55:56 2012] Using photon index=1.80, rate=0.00418, arf fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src2.arf
[Sun Feb 26 03:55:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 26 03:55:56 2012] Updating source flux to 3.1e-14
[Sun Feb 26 03:56:04 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 26 03:56:05 2012] acisf13006/analysis//spectral/fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete