[Sun Feb 26 02:53:40 2012] Detection parameters:
  Position = (252.5, 608.4) = 13 55 39.92 40 27 42.8
  Extent = 1.0" x 0.6", rotation angle = 103 degrees
  Source counts = 22.6 +/- 4.9
  Background counts = 1.4
  Rate = 0.004 +/- 0.0009

[Sun Feb 26 02:53:40 2012] Off-axis axis estimate = 0.65'
[Sun Feb 26 03:14:25 2012] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sun Feb 26 03:14:25 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Sun Feb 26 03:14:25 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.364
[Sun Feb 26 03:14:25 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 0.39"
[Sun Feb 26 03:20:04 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass0_src2.ximg exists
[Sun Feb 26 03:20:04 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass0_src2_1.ximg exists
[Sun Feb 26 03:20:04 2012] Fit fullrun_ccd7_acisf13006_pi14-548_cl_pass0_src2 appears to have run properly
[Sun Feb 26 03:20:04 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sun Feb 26 03:20:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13006_pi14-548_cl_pass0_tfrozen_src2.csv
[Sun Feb 26 03:20:04 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Feb 26 03:20:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13006_pi14-548_cl_pass0_tfrozen_src2.csv
[Sun Feb 26 03:20:04 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13006_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13006_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 03:20:07 2012] Spatial fit model total counts = 25.425500, observed total counts = 29.000000
[Sun Feb 26 03:20:07 2012] Offset between fit and detection position for source 1 = 1.074699 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.074699 pixels
  Position = (253.1, 607.5) = 13 55 39.91 40 27 42.1
  Extent = 1.3 (0.9-1.5)", rotation angle = 0
  Source counts = 26.8 +/- 5.2
  Background counts = 0.0
  Rate = 0.005 +/- 0.001
[Sun Feb 26 03:20:07 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 03:20:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 03:20:07 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 03:20:07 2012] Source does appear to be extended
[Sun Feb 26 03:20:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 03:37:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 26 03:37:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 26 03:37:41 2012] Initial guess for spatial extent in simple fitting = 1.25"
[Sun Feb 26 03:37:41 2012] source mask rpix=2.5, npix_max = 37, mask sum = 42, frac = 1.131
[Sun Feb 26 03:37:41 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 1.25"
[Sun Feb 26 03:44:12 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass1_src2.ximg exists
[Sun Feb 26 03:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13006_pi14-548_cl_pass1_src2.csv
[Sun Feb 26 03:44:12 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass1_src2_1.ximg exists
[Sun Feb 26 03:44:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf13006_pi14-548_cl_pass1_src2.csv
[Sun Feb 26 03:44:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf13006_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf13006_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 26 03:44:12 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sun Feb 26 03:44:12 2012] fullrun_ccd7_acisf13006_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Feb 26 03:44:12 2012] Fit fullrun_ccd7_acisf13006_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Feb 26 03:44:16 2012] Spatial fit model total counts = 24.120500, observed total counts = 28.000000
[Sun Feb 26 03:44:16 2012] Offset between fit and detection position for source 1 = 1.051065 pixels
[Sun Feb 26 03:44:16 2012] 23.880500 total counts/ 0.000000 bgd. counts: snr = 168103770456771.468750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.051065 pixels
  Position = (253.3, 608.6) = 13 55 39.91 40 27 42.6
  Extent = 1.5 (1.2-1.9)" x 0.8 (0.6-1.0)", rotation angle = 79 (60-90) degrees
  Source counts = 23.9 +/- 4.9
  Background counts = 0.0
  Rate = 0.004 +/- 0.0009
[Sun Feb 26 03:44:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb 26 03:44:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 26 03:44:16 2012] Assessing source extent using major axis lower bound
[Sun Feb 26 03:44:16 2012] Source does appear to be extended
[Sun Feb 26 03:44:16 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Sun Feb 26 03:51:42 2012] Writing source region out to fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src1_src.reg
[Sun Feb 26 03:51:42 2012] Extracting stamp from image fullrun_ccd7_acisf13006_pi14-548_cl_sm2.00.img.gz, (183, 538) - (324, 679)
[Sun Feb 26 03:51:42 2012] Writing fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src1.gif
[Sun Feb 26 03:52:01 2012] Size of ../../acisf13006/products/events/fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src1_src.evt.gz[events] = 31 counts
[Sun Feb 26 03:52:01 2012] Mean chipx,y = (240.19, 426.87)
[Sun Feb 26 03:52:01 2012] Mean tdetx,y = (4157.19, 2128.87)
[Sun Feb 26 03:52:01 2012] chipx,y range = (221.00-255.00, 410.00-449.00)
[Sun Feb 26 03:52:01 2012] Size of ../../acisf13006/products/events/fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 42 counts
[Sun Feb 26 03:52:02 2012] Not generating rmf since there are only 23 counts
[Sun Feb 26 03:52:02 2012] arf not found, will run specextract
[Sun Feb 26 03:52:09 2012] ../../acisf13006/products/spectra/fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src1.warf not found
[Sun Feb 26 03:52:09 2012] ../../acisf13006/products/spectra/fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src1.wrmf not found
[Sun Feb 26 03:52:09 2012] Removal of ../../acisf13006/products/spectra/fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src1.soff failed
[Sun Feb 26 03:55:54 2012] Spectrum 1 has only 24 counts, deleting rmf
[Sun Feb 26 03:55:54 2012] 207.562
[Sun Feb 26 03:55:56 2012] Updating aperture counts using extracted products
[Sun Feb 26 03:55:56 2012] Error reading totcts from fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Feb 26 03:55:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 03:55:56 2012] Using photon index=1.80, rate=0.00443, arf fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src1.arf
[Sun Feb 26 03:55:56 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 26 03:55:56 2012] Updating source flux to 3.7e-14
[Sun Feb 26 03:56:04 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 26 03:56:05 2012] acisf13006/analysis//spectral/fullrun_ccd7_acisf13006_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete