[Sun Oct  9 22:43:54 2011] Detection parameters:
  Position = (181.9, 609.7) = 3 46 40.94 24 7 46.7
  Extent = 0.7" x 0.6", rotation angle = 78 degrees
  Source counts = 23.0 +/- 4.9
  Background counts = 1.0
  Rate = 0.0007 +/- 0.0001

[Sun Oct  9 22:44:00 2011] Off-axis axis estimate = 3.56'
[Sun Oct  9 22:45:11 2011] Using EEF radius (= 0.71 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 22:45:11 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Sun Oct  9 22:45:11 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.064
[Sun Oct  9 22:45:11 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.71"
[Sun Oct  9 22:45:12 2011] fullrun_ccd2_acisf00013_pi14-548_cl_pass0_src10.ximg exists
[Sun Oct  9 22:45:12 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf00013_pi14-548_cl_pass0_src10.csv
[Sun Oct  9 22:45:12 2011] fullrun_ccd2_acisf00013_pi14-548_cl_pass0_src10_1.ximg exists
[Sun Oct  9 22:45:12 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf00013_pi14-548_cl_pass0_src10.csv
[Sun Oct  9 22:45:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00013_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00013_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 22:45:12 2011] fullrun_ccd2_acisf00013_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sun Oct  9 22:45:12 2011] fullrun_ccd2_acisf00013_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Oct  9 22:45:12 2011] Fit fullrun_ccd2_acisf00013_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Oct  9 22:45:28 2011] Spatial fit model total counts = 25.141800, observed total counts = 26.000000
[Sun Oct  9 22:45:28 2011] Offset between fit and detection position for source 10 = 0.913858 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.913858 pixels
  Position = (182.5, 610.4) = 3 46 40.94 24 7 46.8
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 24.1 +/- 4.9
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Sun Oct  9 22:45:28 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 22:45:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 22:45:28 2011] Assessing source extent using major axis lower bound
[Sun Oct  9 22:45:28 2011] Source does appear to be extended
[Sun Oct  9 22:45:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 22:46:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  9 22:46:03 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Sun Oct  9 22:46:03 2011] source mask rpix=1.6, npix_max = 16, mask sum = 20, frac = 1.186
[Sun Oct  9 22:46:03 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.76"
[Sun Oct  9 22:46:04 2011] fullrun_ccd2_acisf00013_pi14-548_cl_pass1_src10.ximg exists
[Sun Oct  9 22:46:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00013_pi14-548_cl_pass1_src10.csv
[Sun Oct  9 22:46:04 2011] fullrun_ccd2_acisf00013_pi14-548_cl_pass1_src10_1.ximg exists
[Sun Oct  9 22:46:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00013_pi14-548_cl_pass1_src10.csv
[Sun Oct  9 22:46:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00013_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00013_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 22:46:04 2011] fullrun_ccd2_acisf00013_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sun Oct  9 22:46:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00013_pi14-548_cl_pass1_tfrozen_src10.csv
[Sun Oct  9 22:46:04 2011] fullrun_ccd2_acisf00013_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Oct  9 22:46:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00013_pi14-548_cl_pass1_tfrozen_src10.csv
[Sun Oct  9 22:46:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00013_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00013_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 22:46:31 2011] Spatial fit model total counts = 24.313400, observed total counts = 27.000000
[Sun Oct  9 22:46:31 2011] Offset between fit and detection position for source 10 = 0.060844 pixels
[Sun Oct  9 22:46:31 2011] 23.162969 total counts/ 0.003769 bgd. counts: snr = 377.226195
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.060844 pixels
  Position = (182.5, 610.4) = 3 46 40.93 24 7 46.8
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 23.2 +/- 4.8
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Sun Oct  9 22:46:31 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 22:46:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 22:46:31 2011] Assessing source extent using major axis lower bound
[Sun Oct  9 22:46:31 2011] Source does appear to be extended
[Sun Oct  9 22:46:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 22:54:32 2011] Not overwriting source region fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10_src.reg
[Sun Oct  9 22:54:32 2011] Extracting stamp from image fullrun_ccd2_acisf00013_pi14-548_cl_sm2.00.img.gz, (146, 574) - (219, 647)
[Sun Oct  9 22:54:32 2011] Writing fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10.gif
[Sun Oct  9 22:56:46 2011] ../../acisf00013/products/events/fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10_src.evt and ../../acisf00013/products/events/fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun Oct  9 22:56:46 2011] Size of ../../acisf00013/products/events/fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10_src.evt.gz[events] = 24 counts
[Sun Oct  9 22:56:46 2011] Mean chipx,y = (87.00, 648.71)
[Sun Oct  9 22:56:46 2011] Mean tdetx,y = (3709.71, 3999.00)
[Sun Oct  9 22:56:46 2011] chipx,y range = (68.00-103.00, 627.00-664.00)
[Sun Oct  9 22:56:46 2011] Size of ../../acisf00013/products/events/fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 18 counts
[Sun Oct  9 22:56:46 2011] ../../acisf00013/products/images/fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10_src.img and ../../acisf00013/products/images/fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun Oct  9 22:56:46 2011] Not generating rmf since there are only 23 counts
[Sun Oct  9 22:56:52 2011] ../../acisf00013/products/spectra/fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10_bkg.pi not found
[Sun Oct  9 22:56:52 2011] ../../acisf00013/products/spectra/fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10.warf not found
[Sun Oct  9 22:56:52 2011] ../../acisf00013/products/spectra/fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10.wrmf not found
[Sun Oct  9 22:56:52 2011] Removal of ../../acisf00013/products/spectra/fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10.soff failed
[Sun Oct  9 22:56:52 2011] Failed to rename ../../acisf00013/products/spectra/fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10_grp.pi to ../../acisf00013/products/spectra/fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10_src.pi
[Sun Oct  9 22:57:02 2011] ../../acisf00013/products/lightcurves/fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10_src.lc and ../../acisf00013/products/lightcurves/fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun Oct  9 22:58:27 2011] 192.624
[Sun Oct  9 23:06:09 2011] Updating aperture counts using extracted products
[Sun Oct  9 23:06:09 2011] Error reading totcts from fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10_src.pi
[Sun Oct  9 23:06:09 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  9 23:06:09 2011] Using photon index=1.80, rate=0.000672, arf fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10.arf
[Sun Oct  9 23:06:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct  9 23:06:09 2011] Updating source flux to 6.6e-15
[Sun Oct  9 23:06:21 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct  9 23:06:22 2011] acisf00013/analysis//spectral/fullrun_ccd2_acisf00013_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete