[Tue Mar 13 14:12:46 2012] Detection parameters:
  Position = (590.8, 227.7) = 2 40 13.71 -8 28 51.3
  Extent = 0.7" x 0.5", rotation angle = 43 degrees
  Source counts = 13.9 +/- 4.0
  Background counts = 2.1
  Rate = 0.0005 +/- 0.0001

[Tue Mar 13 14:12:46 2012] Off-axis axis estimate = 5.52'
[Tue Mar 13 14:13:10 2012] Using EEF radius (= 1.40 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 14:13:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 14:13:10 2012] Initial guess for spatial extent in simple fitting = 1.40"
[Tue Mar 13 14:13:10 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.095
[Tue Mar 13 14:13:10 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 1.40"
[Tue Mar 13 14:13:11 2012] fullrun_ccd7_acisf12988_pi14-548_cl_pass0_src7.ximg exists
[Tue Mar 13 14:13:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12988_pi14-548_cl_pass0_src7.csv
[Tue Mar 13 14:13:11 2012] fullrun_ccd7_acisf12988_pi14-548_cl_pass0_src7_1.ximg exists
[Tue Mar 13 14:13:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12988_pi14-548_cl_pass0_src7.csv
[Tue Mar 13 14:13:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12988_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12988_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 14:13:11 2012] fullrun_ccd7_acisf12988_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Tue Mar 13 14:13:11 2012] fullrun_ccd7_acisf12988_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Mar 13 14:13:11 2012] Fit fullrun_ccd7_acisf12988_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Mar 13 14:13:15 2012] Spatial fit model total counts = 27.999900, observed total counts = 28.000000
[Tue Mar 13 14:13:15 2012] Offset between fit and detection position for source 9 = 1.070502 pixels
[Tue Mar 13 14:13:15 2012] 28.274200 total counts/ 15.135500 bgd. counts: snr = 3.377178
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.070502 pixels
  Position = (591.6, 228.4) = 2 40 13.71 -8 28 51.2
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 13.1 +/- 5.3
  Background counts = 15.1
  Rate = 0.0005 +/- 0.0002
[Tue Mar 13 14:13:15 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 14:13:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 14:13:15 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 14:13:15 2012] Source does appear to be extended
[Tue Mar 13 14:13:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 14:13:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 14:13:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 14:13:26 2012] Initial guess for spatial extent in simple fitting = 0.63"
[Tue Mar 13 14:13:26 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.715
[Tue Mar 13 14:13:26 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 0.63"
[Tue Mar 13 14:13:26 2012] fullrun_ccd7_acisf12988_pi14-548_cl_pass1_src7.ximg exists
[Tue Mar 13 14:13:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12988_pi14-548_cl_pass1_src7.csv
[Tue Mar 13 14:13:26 2012] fullrun_ccd7_acisf12988_pi14-548_cl_pass1_src7_1.ximg exists
[Tue Mar 13 14:13:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12988_pi14-548_cl_pass1_src7.csv
[Tue Mar 13 14:13:26 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12988_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12988_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 14:13:26 2012] fullrun_ccd7_acisf12988_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Tue Mar 13 14:13:26 2012] fullrun_ccd7_acisf12988_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Mar 13 14:13:26 2012] Fit fullrun_ccd7_acisf12988_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Mar 13 14:13:30 2012] Spatial fit model total counts = 25.949400, observed total counts = 26.000000
[Tue Mar 13 14:13:30 2012] Offset between fit and detection position for source 9 = 0.010947 pixels
[Tue Mar 13 14:13:30 2012] 26.175700 total counts/ 13.043100 bgd. counts: snr = 3.636305
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.010947 pixels
  Position = (591.6, 228.5) = 2 40 13.71 -8 28 51.2
  Extent = 0.6 (0.4-1.2)", rotation angle = 0
  Source counts = 13.1 +/- 5.1
  Background counts = 13.0
  Rate = 0.0005 +/- 0.0002
[Tue Mar 13 14:13:30 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 14:13:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 14:13:30 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 14:13:30 2012] Source does appear to be extended
[Tue Mar 13 14:13:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 14:14:02 2012] Not overwriting source region fullrun_ccd7_acisf12988_pi14-548_pass1_cl_src9_src.reg
[Tue Mar 13 14:14:02 2012] Extracting stamp from image fullrun_ccd7_acisf12988_pi14-548_cl_sm2.00.img.gz, (563, 200) - (620, 257)
[Tue Mar 13 14:14:02 2012] Writing fullrun_ccd7_acisf12988_pi14-548_pass1_cl_src9.gif
[Tue Mar 13 14:14:20 2012] ../../acisf12988/products/events/fullrun_ccd7_acisf12988_pi14-548_pass1_cl_src9_src.evt and ../../acisf12988/products/events/fullrun_ccd7_acisf12988_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Tue Mar 13 14:14:20 2012] Size of ../../acisf12988/products/events/fullrun_ccd7_acisf12988_pi14-548_pass1_cl_src9_src.evt.gz[events] = 17 counts
[Tue Mar 13 14:14:20 2012] Mean chipx,y = (860.65, 473.00)
[Tue Mar 13 14:14:20 2012] Mean tdetx,y = (4777.65, 2175.00)
[Tue Mar 13 14:14:20 2012] chipx,y range = (844.00-877.00, 456.00-490.00)
[Tue Mar 13 14:14:20 2012] Size of ../../acisf12988/products/events/fullrun_ccd7_acisf12988_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 24 counts
[Tue Mar 13 14:14:20 2012] ../../acisf12988/products/images/fullrun_ccd7_acisf12988_pi14-548_pass1_cl_src9_src.img and ../../acisf12988/products/images/fullrun_ccd7_acisf12988_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Tue Mar 13 14:14:20 2012] ../../acisf12988/products/spectra/fullrun_ccd7_acisf12988_pi14-548_pass1_cl_src9_src.pi and ../../acisf12988/products/spectra/fullrun_ccd7_acisf12988_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Tue Mar 13 14:14:20 2012] Not generating rmf since there are only 13 counts
[Tue Mar 13 14:14:23 2012] ../../acisf12988/products/lightcurves/fullrun_ccd7_acisf12988_pi14-548_pass1_cl_src9_src.lc and ../../acisf12988/products/lightcurves/fullrun_ccd7_acisf12988_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Tue Mar 13 14:14:26 2012] 215.886
[Tue Mar 13 14:14:28 2012] Updating aperture counts using extracted products
[Tue Mar 13 14:14:28 2012] Error reading totcts from fullrun_ccd7_acisf12988_pi14-548_pass1_cl_src9_src.pi.gz
[Tue Mar 13 14:14:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 14:14:28 2012] Using photon index=1.80, rate=0.000453, arf fullrun_ccd7_acisf12988_pi14-548_pass1_cl_src9.arf
[Tue Mar 13 14:14:28 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Mar 13 14:14:28 2012] Updating source flux to 3.6e-15
[Tue Mar 13 14:14:36 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting