[Sat Jun 15 08:32:21 2013] Detection parameters:
  Position = (478.0, 61.7) = 15 17 19.30 56 12 31.3
  Extent = 5.1" x 3.4", rotation angle = 149 degrees
  Source counts = 27.1 +/- 6.6
  Background counts = 16.9
  Rate = 0.002 +/- 0.0004

[Sat Jun 15 08:32:21 2013] Off-axis axis estimate = 12.73'
[Sat Jun 15 08:34:14 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 08:34:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 08:34:14 2013] Initial guess for spatial extent in simple fitting = 7.26"
[Sat Jun 15 08:34:14 2013] source mask rpix=14.7, npix_max = 929, mask sum = 930, frac = 1.000
[Sat Jun 15 08:34:14 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Sat Jun 15 08:51:51 2013] fullrun_ccd3_acisf12987_pi14-548_cl_pass0_src1.ximg exists
[Sat Jun 15 08:51:51 2013] fullrun_ccd3_acisf12987_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Jun 15 08:51:51 2013] Fit fullrun_ccd3_acisf12987_pi14-548_cl_pass0_src1 appears to have run properly
[Sat Jun 15 08:51:51 2013] fullrun_ccd3_acisf12987_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 15 08:51:51 2013] fullrun_ccd3_acisf12987_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 15 08:51:51 2013] Fit fullrun_ccd3_acisf12987_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 15 09:09:02 2013] Spatial fit model total counts = 77.662100, observed total counts = 72.000000
[Sat Jun 15 09:09:02 2013] Offset between fit and detection position for source 1 = 1.697126 pixels
[Sat Jun 15 09:09:02 2013] 77.809200 total counts/ 42.300000 bgd. counts: snr = 5.459724
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.697126 pixels
  Position = (479.6, 61.5) = 15 17 19.23 56 12 30.9
  Extent = 6.3 (4.3-9.7)" x 3.9 (2.6-6.0)", rotation angle = 25 (311-67) degrees
  Source counts = 35.5 +/- 8.8
  Background counts = 42.3
  Rate = 0.002 +/- 0.0006
[Sat Jun 15 09:09:02 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 09:09:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 09:09:02 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 09:09:02 2013] Source does appear to be extended
[Sat Jun 15 09:09:02 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.72
[Sat Jun 15 09:09:16 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 09:09:16 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 09:09:16 2013] Initial guess for spatial extent in simple fitting = 5.10"
[Sat Jun 15 09:09:16 2013] source mask rpix=10.4, npix_max = 472, mask sum = 441, frac = 0.934
[Sat Jun 15 09:09:16 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.10"
[Sat Jun 15 09:18:23 2013] fullrun_ccd3_acisf12987_pi14-548_cl_pass1_src1.ximg exists
[Sat Jun 15 09:18:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12987_pi14-548_cl_pass1_src1.csv
[Sat Jun 15 09:18:23 2013] fullrun_ccd3_acisf12987_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Jun 15 09:18:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12987_pi14-548_cl_pass1_src1.csv
[Sat Jun 15 09:18:23 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12987_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12987_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 09:18:23 2013] fullrun_ccd3_acisf12987_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 15 09:18:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12987_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat Jun 15 09:18:23 2013] fullrun_ccd3_acisf12987_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 15 09:18:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12987_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat Jun 15 09:18:23 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12987_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12987_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 09:34:35 2013] Warning, spatial fit 1 centroid is now closest to src. 7
[Sat Jun 15 09:34:35 2013] Source 1 in spatial fitting is no longer close to this source
[Sat Jun 15 09:34:35 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 09:34:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 09:34:35 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 09:34:35 2013] Source does appear to be extended
[Sat Jun 15 09:34:35 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.72
[Sat Jun 15 09:34:57 2013] Writing source region out to fullrun_ccd3_acisf12987_pi14-548_pass1_cl_src1_src.reg
[Sat Jun 15 09:34:57 2013] Extracting stamp from image fullrun_ccd3_acisf12987_pi14-548_cl_sm2.00.img.gz, (194, 0) - (766, 348)
[Sat Jun 15 09:34:57 2013] Writing fullrun_ccd3_acisf12987_pi14-548_pass1_cl_src1.gif
[Sat Jun 15 09:34:59 2013] Size of ../../acisf12987/products/events/fullrun_ccd3_acisf12987_pi14-548_pass1_cl_src1_src.evt.gz[events] = 50 counts
[Sat Jun 15 09:34:59 2013] Mean chipx,y = (566.32, 409.22)
[Sat Jun 15 09:34:59 2013] Mean tdetx,y = (4722.78, 3627.32)
[Sat Jun 15 09:34:59 2013] chipx,y range = (515.00-608.00, 387.00-441.00)
[Sat Jun 15 09:34:59 2013] Size of ../../acisf12987/products/events/fullrun_ccd3_acisf12987_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 251 counts
[Sat Jun 15 09:35:01 2013] Not generating rmf since there are only 35 counts
[Sat Jun 15 09:35:01 2013] arf not found, will run specextract
[Sat Jun 15 09:35:34 2013] ../../acisf12987/products/spectra/fullrun_ccd3_acisf12987_pi14-548_pass1_cl_src1.warf not found
[Sat Jun 15 09:35:34 2013] ../../acisf12987/products/spectra/fullrun_ccd3_acisf12987_pi14-548_pass1_cl_src1.wrmf not found
[Sat Jun 15 09:35:34 2013] Removal of ../../acisf12987/products/spectra/fullrun_ccd3_acisf12987_pi14-548_pass1_cl_src1.soff failed
[Sat Jun 15 09:35:42 2013] Spectrum 1 has only 36 counts, deleting rmf
[Sat Jun 15 09:35:42 2013] 154.642
[Sat Jun 15 09:42:32 2013] Updating aperture counts using extracted products
[Sat Jun 15 09:42:32 2013] Total counts from fullrun_ccd3_acisf12987_pi14-548_pass1_cl_src1_src.pi.gz = 50.00
[Sat Jun 15 09:42:32 2013] Total counts from fullrun_ccd3_acisf12987_pi14-548_pass1_cl_src1_bgd.pi.gz = 251.00
[Sat Jun 15 09:42:32 2013] Got source and background scale factors 0.000076, 0.001430
[Sat Jun 15 09:42:32 2013] User source parameters:
  Position = (479.6, 61.5) = 15 17 19.23 56 12 30.9
  Extent = 6.3 (4.3-9.7)" x 3.9 (2.6-6.0)", rotation angle = 25 (311-67) degrees
  Source aperture counts = 36.6 +/- 8.1
  Background aperture counts = 13.4
  Rate = 0.002 +/- 0.0005

[Sat Jun 15 09:42:32 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 09:42:32 2013] Using photon index=1.80, rate=0.00222, arf fullrun_ccd3_acisf12987_pi14-548_pass1_cl_src1.arf
[Sat Jun 15 09:42:32 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jun 15 09:42:32 2013] Updating source flux to 3.3e-14
[Sat Jun 15 09:42:38 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 15 09:42:39 2013] acisf12987/analysis//spectral/fullrun_ccd3_acisf12987_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete