[Sun May 12 00:31:20 2013] Detection parameters:
  Position = (666.4, 1359.8) = 11 4 4.82 40 54 19.0
  Extent = 0.8" x 0.6", rotation angle = 92 degrees
  Source counts = 10.4 +/- 3.6
  Background counts = 2.6
  Rate = 0.0002 +/- 7e-05

[Sun May 12 00:31:21 2013] Off-axis axis estimate = 3.98'
[Sun May 12 01:30:23 2013] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting
[Sun May 12 01:30:23 2013] Initial guess for spatial extent in simple fitting = 0.82"
[Sun May 12 01:30:23 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Sun May 12 01:30:23 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 0.82"
[Sun May 12 01:54:32 2013] fullrun_ccd7_acisf12977_pi14-548_cl_pass0_src24.ximg exists
[Sun May 12 01:54:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12977_pi14-548_cl_pass0_src24.csv
[Sun May 12 01:54:32 2013] fullrun_ccd7_acisf12977_pi14-548_cl_pass0_src24_1.ximg exists
[Sun May 12 01:54:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12977_pi14-548_cl_pass0_src24.csv
[Sun May 12 01:54:32 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12977_pi14-548_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12977_pi14-548_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 01:54:33 2013] fullrun_ccd7_acisf12977_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Sun May 12 01:54:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12977_pi14-548_cl_pass0_tfrozen_src24.csv
[Sun May 12 01:54:33 2013] fullrun_ccd7_acisf12977_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Sun May 12 01:54:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12977_pi14-548_cl_pass0_tfrozen_src24.csv
[Sun May 12 01:54:33 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12977_pi14-548_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12977_pi14-548_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 01:54:40 2013] Spatial fit model total counts = 20.185900, observed total counts = 18.000000
[Sun May 12 01:54:40 2013] Offset between fit and detection position for source 26 = 0.635386 pixels
[Sun May 12 01:54:40 2013] 21.592890 total counts/ 16.586200 bgd. counts: snr = 1.229355
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.635386 pixels
  Position = (667.0, 1359.6) = 11 4 4.81 40 54 18.7
  Extent = 0.2" x 0.2", rotation angle = 0
  Source counts = 5.0 +/- 4.6
  Background counts = 16.6
  Rate = 0.0001 +/- 9e-05
  Deleting source due to low Poisson probability