[Sun May  5 09:08:30 2013] Detection parameters:
  Position = (317.3, 754.8) = 12 43 47.04 11 32 37.1
  Extent = 0.5" x 0.5", rotation angle = 13 degrees
  Source counts = 296.4 +/- 17.7
  Background counts = 16.6
  Rate = 0.003 +/- 0.0002

[Sun May  5 09:08:35 2013] Off-axis axis estimate = 1.99'
[Sun May  5 10:09:51 2013] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Sun May  5 10:09:51 2013] Initial guess for spatial extent in simple fitting = 0.43"
[Sun May  5 10:09:51 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.194
[Sun May  5 10:09:51 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 0.43"
[Sun May  5 11:42:19 2013] fullrun_ccd7_acisf12976_pi14-548_cl_pass0_src8.ximg exists
[Sun May  5 11:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12976_pi14-548_cl_pass0_src8.csv
[Sun May  5 11:42:19 2013] fullrun_ccd7_acisf12976_pi14-548_cl_pass0_src8_1.ximg exists
[Sun May  5 11:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12976_pi14-548_cl_pass0_src8.csv
[Sun May  5 11:42:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12976_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12976_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 11:42:19 2013] fullrun_ccd7_acisf12976_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Sun May  5 11:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12976_pi14-548_cl_pass0_tfrozen_src8.csv
[Sun May  5 11:42:19 2013] fullrun_ccd7_acisf12976_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Sun May  5 11:42:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12976_pi14-548_cl_pass0_tfrozen_src8.csv
[Sun May  5 11:42:19 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12976_pi14-548_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12976_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 11:42:45 2013] Spatial fit model total counts = 284.766000, observed total counts = 1134.000000
[Sun May  5 11:42:45 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 11:42:45 2013] Vigneting correction estimate = 1.000000
[Sun May  5 11:42:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 11:42:45 2013] Assessing source extent using major
[Sun May  5 11:42:45 2013] Source does appear to be extended
[Sun May  5 11:42:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 12:38:39 2013] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Sun May  5 12:38:39 2013] Initial guess for spatial extent in simple fitting = 0.43"
[Sun May  5 12:38:39 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.194
[Sun May  5 12:38:39 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 0.43"
[Sun May  5 14:14:11 2013] fullrun_ccd7_acisf12976_pi14-548_cl_pass1_src8.ximg exists
[Sun May  5 14:14:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12976_pi14-548_cl_pass1_src8.csv
[Sun May  5 14:14:11 2013] fullrun_ccd7_acisf12976_pi14-548_cl_pass1_src8_1.ximg exists
[Sun May  5 14:14:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12976_pi14-548_cl_pass1_src8.csv
[Sun May  5 14:14:11 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12976_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12976_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 14:14:12 2013] fullrun_ccd7_acisf12976_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Sun May  5 14:14:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12976_pi14-548_cl_pass1_tfrozen_src8.csv
[Sun May  5 14:14:12 2013] fullrun_ccd7_acisf12976_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Sun May  5 14:14:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12976_pi14-548_cl_pass1_tfrozen_src8.csv
[Sun May  5 14:14:12 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12976_pi14-548_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12976_pi14-548_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 14:14:35 2013] Spatial fit model total counts = 272.783000, observed total counts = 1134.000000
[Sun May  5 14:14:35 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 14:14:35 2013] Vigneting correction estimate = 1.000000
[Sun May  5 14:14:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 14:14:35 2013] Assessing source extent using major
[Sun May  5 14:14:35 2013] Source does appear to be extended
[Sun May  5 14:14:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 14:46:50 2013] Writing source region out to fullrun_ccd7_acisf12976_pi14-548_pass1_cl_src10_src.reg
[Sun May  5 14:46:50 2013] Extracting stamp from image fullrun_ccd7_acisf12976_pi14-548_cl_sm2.00.img.gz, (295, 732) - (340, 777)
[Sun May  5 14:46:50 2013] Writing fullrun_ccd7_acisf12976_pi14-548_pass1_cl_src10.gif
[Sun May  5 14:49:09 2013] Size of ../../acisf12976/products/events/fullrun_ccd7_acisf12976_pi14-548_pass1_cl_src10_src.evt.gz[events] = 304 counts
[Sun May  5 14:49:09 2013] Mean chipx,y = (289.72, 725.78)
[Sun May  5 14:49:09 2013] Mean tdetx,y = (4206.72, 2427.78)
[Sun May  5 14:49:09 2013] chipx,y range = (270.00-307.00, 708.00-744.00)
[Sun May  5 14:49:09 2013] Size of ../../acisf12976/products/events/fullrun_ccd7_acisf12976_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 117 counts
[Sun May  5 14:49:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  5 14:49:10 2013] arf not found, will run specextract
[Sun May  5 14:49:18 2013] ../../acisf12976/products/spectra/fullrun_ccd7_acisf12976_pi14-548_pass1_cl_src10.warf not found
[Sun May  5 14:49:18 2013] ../../acisf12976/products/spectra/fullrun_ccd7_acisf12976_pi14-548_pass1_cl_src10.wrmf not found
[Sun May  5 14:49:18 2013] Removal of ../../acisf12976/products/spectra/fullrun_ccd7_acisf12976_pi14-548_pass1_cl_src10.soff failed
[Sun May  5 15:29:21 2013] Keeping rmf generated by specextract
[Sun May  5 15:29:21 2013] 233.898
[Sun May  5 15:29:35 2013] Updating aperture counts using extracted products
[Sun May  5 15:29:35 2013] Total counts from fullrun_ccd7_acisf12976_pi14-548_pass1_cl_src10_src.pi.gz = 304.00
[Sun May  5 15:29:35 2013] Total counts from fullrun_ccd7_acisf12976_pi14-548_pass1_cl_src10_bgd.pi.gz = 117.00
[Sun May  5 15:29:35 2013] Got source and background scale factors 0.000001, 0.000008
[Sun May  5 15:29:35 2013] User source parameters:
  Position = (317.3, 754.8) = 12 43 47.04 11 32 37.1
  Extent = 0.5" x 0.5", rotation angle = 13
  Source aperture counts = 293.5 +/- 18.5
  Background aperture counts = 10.5
  Rate = 0.003 +/- 0.0002

[Sun May  5 15:29:35 2013] Updating counts from extracted products
[Sun May  5 15:29:35 2013] Set source signif. to 293.49/3.24 = 90.51
[Sun May  5 15:29:54 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 15:29:54 2013] Using photon index=1.80, rate=0.0029, arf fullrun_ccd7_acisf12976_pi14-548_pass1_cl_src10.arf
[Sun May  5 15:29:54 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May  5 15:29:54 2013] Updating source flux to 2.2e-14
[Sun May  5 15:30:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting