[Sun May  5 09:08:08 2013] Detection parameters:
  Position = (587.6, 249.1) = 12 43 37.72 11 37 2.9
  Extent = 0.8" x 0.5", rotation angle = 59 degrees
  Source counts = 15.3 +/- 4.2
  Background counts = 2.7
  Rate = 0.0002 +/- 4e-05

[Sun May  5 09:08:08 2013] Off-axis axis estimate = 3.68'
[Sun May  5 09:26:30 2013] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Sun May  5 09:26:30 2013] Initial guess for spatial extent in simple fitting = 0.74"
[Sun May  5 09:26:30 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.999
[Sun May  5 09:26:30 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 0.74"
[Sun May  5 10:09:51 2013] fullrun_ccd6_acisf12976_pi14-548_cl_pass0_src27.ximg exists
[Sun May  5 10:09:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12976_pi14-548_cl_pass0_src27.csv
[Sun May  5 10:09:51 2013] fullrun_ccd6_acisf12976_pi14-548_cl_pass0_src27_1.ximg exists
[Sun May  5 10:09:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12976_pi14-548_cl_pass0_src27.csv
[Sun May  5 10:09:51 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12976_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12976_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 10:09:51 2013] fullrun_ccd6_acisf12976_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Sun May  5 10:09:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12976_pi14-548_cl_pass0_tfrozen_src27.csv
[Sun May  5 10:09:51 2013] fullrun_ccd6_acisf12976_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Sun May  5 10:09:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12976_pi14-548_cl_pass0_tfrozen_src27.csv
[Sun May  5 10:09:51 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12976_pi14-548_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12976_pi14-548_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 11:42:33 2013] Spatial fit model total counts = 24.411900, observed total counts = 28.000000
[Sun May  5 11:42:33 2013] Offset between fit and detection position for source 19 = 1.349316 pixels
[Sun May  5 11:42:33 2013] 25.792700 total counts/ 1.903500 bgd. counts: snr = 17.315106
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 1.349316 pixels
  Position = (587.3, 250.4) = 12 43 37.75 11 37 3.3
  Extent = 1.4 (1.2-1.5)" x 0.9 (0.7-1.4)", rotation angle = 252 (44-356) degrees
  Source counts = 23.9 +/- 5.1
  Background counts = 1.9
  Rate = 0.0002 +/- 5e-05
[Sun May  5 11:42:33 2013] Vigneting correction estimate = 1.000000
[Sun May  5 11:42:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 11:42:33 2013] Assessing source extent using major axis lower bound
[Sun May  5 11:42:33 2013] Source does appear to be extended
[Sun May  5 11:42:33 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.82
[Sun May  5 11:56:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  5 11:56:57 2013] Initial guess for spatial extent in simple fitting = 1.15"
[Sun May  5 11:56:57 2013] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.934
[Sun May  5 11:56:57 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 1.15"
[Sun May  5 12:38:39 2013] fullrun_ccd6_acisf12976_pi14-548_cl_pass1_src27.ximg exists
[Sun May  5 12:38:39 2013] fullrun_ccd6_acisf12976_pi14-548_cl_pass1_src27_1.ximg exists
[Sun May  5 12:38:39 2013] Fit fullrun_ccd6_acisf12976_pi14-548_cl_pass1_src27 appears to have run properly
[Sun May  5 12:38:39 2013] fullrun_ccd6_acisf12976_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Sun May  5 12:38:39 2013] fullrun_ccd6_acisf12976_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Sun May  5 12:38:39 2013] Fit fullrun_ccd6_acisf12976_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Sun May  5 14:14:22 2013] Spatial fit model total counts = 27.265200, observed total counts = 28.000000
[Sun May  5 14:14:22 2013] Offset between fit and detection position for source 19 = 0.439771 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.439771 pixels
  Position = (587.6, 250.1) = 12 43 37.74 11 37 3.2
  Extent = 1.1 (0.9-1.4)", rotation angle = 0
  Source counts = 27.1 +/- 5.2
  Background counts = 0.0
  Rate = 0.0003 +/- 5e-05
[Sun May  5 14:14:22 2013] Vigneting correction estimate = 1.000000
[Sun May  5 14:14:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 14:14:22 2013] Assessing source extent using major axis lower bound
[Sun May  5 14:14:22 2013] Source does appear to be extended
[Sun May  5 14:14:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 14:16:50 2013] Writing source region out to fullrun_ccd6_acisf12976_pi14-548_pass1_cl_src19_src.reg
[Sun May  5 14:16:50 2013] Extracting stamp from image fullrun_ccd6_acisf12976_pi14-548_cl_sm2.00.img.gz, (537, 200) - (638, 301)
[Sun May  5 14:16:50 2013] Writing fullrun_ccd6_acisf12976_pi14-548_pass1_cl_src19.gif
[Sun May  5 14:33:13 2013] Size of ../../acisf12976/products/events/fullrun_ccd6_acisf12976_pi14-548_pass1_cl_src19_src.evt.gz[events] = 29 counts
[Sun May  5 14:33:13 2013] Mean chipx,y = (789.93, 450.66)
[Sun May  5 14:33:13 2013] Mean tdetx,y = (3664.93, 2152.66)
[Sun May  5 14:33:13 2013] chipx,y range = (773.00-808.00, 434.00-470.00)
[Sun May  5 14:33:13 2013] Size of ../../acisf12976/products/events/fullrun_ccd6_acisf12976_pi14-548_pass1_cl_src19_bgd.evt.gz[events] = 102 counts
[Sun May  5 14:33:14 2013] Not generating rmf since there are only 27 counts
[Sun May  5 14:33:14 2013] arf not found, will run specextract
[Sun May  5 14:33:40 2013] ../../acisf12976/products/spectra/fullrun_ccd6_acisf12976_pi14-548_pass1_cl_src19.warf not found
[Sun May  5 14:33:40 2013] ../../acisf12976/products/spectra/fullrun_ccd6_acisf12976_pi14-548_pass1_cl_src19.wrmf not found
[Sun May  5 14:33:40 2013] Removal of ../../acisf12976/products/spectra/fullrun_ccd6_acisf12976_pi14-548_pass1_cl_src19.soff failed
[Sun May  5 14:46:49 2013] Spectrum 19 has only 27 counts, deleting rmf
[Sun May  5 14:46:49 2013] 200.554
[Sun May  5 15:29:31 2013] Updating aperture counts using extracted products
[Sun May  5 15:29:31 2013] Total counts from fullrun_ccd6_acisf12976_pi14-548_pass1_cl_src19_src.pi.gz = 29.00
[Sun May  5 15:29:31 2013] Total counts from fullrun_ccd6_acisf12976_pi14-548_pass1_cl_src19_bgd.pi.gz = 102.00
[Sun May  5 15:29:31 2013] Got source and background scale factors 0.000004, 0.000043
[Sun May  5 15:29:31 2013] User source parameters:
  Position = (587.6, 250.1) = 12 43 37.74 11 37 3.2
  Extent = 1.1 (0.9-1.4)", rotation angle = 0
  Source aperture counts = 20.1 +/- 6.5
  Background aperture counts = 8.9
  Rate = 0.0002 +/- 6e-05

[Sun May  5 15:29:34 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 15:29:34 2013] Using photon index=1.80, rate=0.000268, arf fullrun_ccd6_acisf12976_pi14-548_pass1_cl_src19.arf
[Sun May  5 15:29:34 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May  5 15:29:34 2013] Updating source flux to 3e-15
[Sun May  5 15:30:01 2013] Source 19 has fewer than 100.000000 counts, skipping spectral fitting