[Thu Aug 15 17:46:33 2013] Detection parameters:
  Position = (731.0, 94.2) = 0 42 49.22 41 18 15.9
  Extent = 0.5" x 0.5", rotation angle = 117 degrees
  Source counts = 31.8 +/- 5.7
  Background counts = 0.2
  Rate = 0.008 +/- 0.001

[Thu Aug 15 17:46:34 2013] Off-axis axis estimate = 2.20'
[Thu Aug 15 17:47:20 2013] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Thu Aug 15 17:47:20 2013] Initial guess for spatial extent in simple fitting = 0.45"
[Thu Aug 15 17:47:20 2013] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.745
[Thu Aug 15 17:47:20 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 0.45"
[Thu Aug 15 17:47:21 2013] fullrun_ccd0_acisf12972_pi14-548_cl_pass0_src7.ximg exists
[Thu Aug 15 17:47:21 2013] Warning: total counts is not > 0
[Thu Aug 15 17:47:21 2013] fullrun_ccd0_acisf12972_pi14-548_cl_pass0_src7_1.ximg exists
[Thu Aug 15 17:47:21 2013] Warning: total counts is not > 0
[Thu Aug 15 17:47:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12972_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12972_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 15 17:47:21 2013] fullrun_ccd0_acisf12972_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Thu Aug 15 17:47:21 2013] Warning: total counts is not > 0
[Thu Aug 15 17:47:21 2013] fullrun_ccd0_acisf12972_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Aug 15 17:47:21 2013] Warning: total counts is not > 0
[Thu Aug 15 17:47:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12972_pi14-548_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12972_pi14-548_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes