[Thu Aug 15 17:46:32 2013] Detection parameters:
  Position = (594.3, 135.3) = 0 42 55.19 41 18 36.1
  Extent = 0.5" x 0.5", rotation angle = 125 degrees
  Source counts = 21.8 +/- 4.7
  Background counts = 0.2
  Rate = 0.005 +/- 0.001

[Thu Aug 15 17:46:34 2013] Off-axis axis estimate = 3.21'
[Thu Aug 15 17:47:20 2013] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Thu Aug 15 17:47:20 2013] Initial guess for spatial extent in simple fitting = 0.62"
[Thu Aug 15 17:47:20 2013] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.721
[Thu Aug 15 17:47:20 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 0.62"
[Thu Aug 15 17:47:21 2013] fullrun_ccd0_acisf12972_pi14-548_cl_pass0_src4.ximg exists
[Thu Aug 15 17:47:21 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf12972_pi14-548_cl_pass0_src4.csv
[Thu Aug 15 17:47:21 2013] fullrun_ccd0_acisf12972_pi14-548_cl_pass0_src4_1.ximg exists
[Thu Aug 15 17:47:21 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf12972_pi14-548_cl_pass0_src4.csv
[Thu Aug 15 17:47:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12972_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12972_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 15 17:47:21 2013] fullrun_ccd0_acisf12972_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Thu Aug 15 17:47:21 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf12972_pi14-548_cl_pass0_tfrozen_src4.csv
[Thu Aug 15 17:47:21 2013] fullrun_ccd0_acisf12972_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Aug 15 17:47:21 2013] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf12972_pi14-548_cl_pass0_tfrozen_src4.csv
[Thu Aug 15 17:47:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12972_pi14-548_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12972_pi14-548_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes