[Wed Feb 22 08:06:25 2012] Detection parameters:
  Position = (285.4, 1120.0) = 0 42 43.90 41 16 10.7
  Extent = 0.6" x 0.5", rotation angle = 28 degrees
  Source counts = 20.3 +/- 4.7
  Background counts = 1.7
  Rate = 0.005 +/- 0.001

[Wed Feb 22 08:06:26 2012] Off-axis axis estimate = 0.41'
[Wed Feb 22 09:10:14 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 09:10:14 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Feb 22 09:10:14 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.878
[Wed Feb 22 09:10:14 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 0.40"
[Wed Feb 22 09:51:30 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass0_src26.ximg exists
[Wed Feb 22 09:51:30 2012] Warning: total counts is not > 0
[Wed Feb 22 09:51:30 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass0_src26_1.ximg exists
[Wed Feb 22 09:51:30 2012] Warning: total counts is not > 0
[Wed Feb 22 09:51:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12971_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12971_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 09:51:30 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Wed Feb 22 09:51:30 2012] Warning: total counts is not > 0
[Wed Feb 22 09:51:30 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Wed Feb 22 09:51:30 2012] Warning: total counts is not > 0
[Wed Feb 22 09:51:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12971_pi14-548_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12971_pi14-548_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 10:06:23 2012] Source 33 is offset by 3.333672 and -0.093980 pixels which is larger than
2 X fitted extent = 0.403715 x 0.403715, not incorporating fit results
[Wed Feb 22 10:06:23 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 10:06:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 10:06:23 2012] Assessing source extent using major
[Wed Feb 22 10:06:23 2012] Source does appear to be extended
[Wed Feb 22 10:06:23 2012] Computing asymmetry using major and minor axis, asym = 1.12
[Wed Feb 22 10:56:20 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 10:56:20 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Feb 22 10:56:20 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.878
[Wed Feb 22 10:56:20 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 0.40"
[Wed Feb 22 11:25:41 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass1_src16.ximg exists
[Wed Feb 22 11:25:41 2012] Warning: total counts is not > 0
[Wed Feb 22 11:25:41 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass1_src16_1.ximg exists
[Wed Feb 22 11:25:41 2012] Warning: total counts is not > 0
[Wed Feb 22 11:25:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12971_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12971_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 11:25:41 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Wed Feb 22 11:25:41 2012] Warning: total counts is not > 0
[Wed Feb 22 11:25:41 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Wed Feb 22 11:25:41 2012] Warning: total counts is not > 0
[Wed Feb 22 11:25:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12971_pi14-548_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12971_pi14-548_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 11:36:03 2012] Source 33 is offset by 1.698881 and 0.509380 pixels which is larger than
2 X fitted extent = 0.403715 x 0.403715, not incorporating fit results
[Wed Feb 22 11:36:03 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 11:36:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 11:36:03 2012] Assessing source extent using major
[Wed Feb 22 11:36:03 2012] Source does appear to be extended
[Wed Feb 22 11:36:03 2012] Computing asymmetry using major and minor axis, asym = 1.12
[Wed Feb 22 11:45:46 2012] Writing source region out to fullrun_ccd3_acisf12971_pi14-548_pass1_cl_src33_src.reg
[Wed Feb 22 11:45:46 2012] Extracting stamp from image fullrun_ccd3_acisf12971_pi14-548_cl_sm2.00.img.gz, (260, 1095) - (311, 1145)
[Wed Feb 22 11:45:46 2012] Writing fullrun_ccd3_acisf12971_pi14-548_pass1_cl_src33.gif
[Wed Feb 22 11:52:05 2012] ../../acisf12971/products/events/fullrun_ccd3_acisf12971_pi14-548_pass1_cl_src33_src.evt.gz[events] does not have any counts, not extracting products.
[Wed Feb 22 11:54:30 2012] No arf file found
[Wed Feb 22 11:54:51 2012] Updating aperture counts using extracted products
[Wed Feb 22 11:54:51 2012] Error reading totcts from fullrun_ccd3_acisf12971_pi14-548_pass1_cl_src33_src.pi
[Wed Feb 22 11:54:52 2012] No arf file for this source, not re-computing flux
[Wed Feb 22 11:54:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Feb 22 11:54:59 2012] acisf12971/analysis//spectral/fullrun_ccd3_acisf12971_pi14-548_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete