[Wed Feb 22 08:06:24 2012] Detection parameters:
  Position = (257.8, 1023.3) = 0 42 45.10 41 15 23.1
  Extent = 0.5" x 0.5", rotation angle = 153 degrees
  Source counts = 17.3 +/- 4.2
  Background counts = 0.7
  Rate = 0.004 +/- 0.001

[Wed Feb 22 08:06:26 2012] Off-axis axis estimate = 1.23'
[Wed Feb 22 09:10:14 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 09:10:14 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Feb 22 09:10:14 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.378
[Wed Feb 22 09:10:14 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 0.38"
[Wed Feb 22 09:51:30 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass0_src30.ximg exists
[Wed Feb 22 09:51:30 2012] Warning: total counts is not > 0
[Wed Feb 22 09:51:30 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass0_src30_1.ximg exists
[Wed Feb 22 09:51:30 2012] Warning: total counts is not > 0
[Wed Feb 22 09:51:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12971_pi14-548_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12971_pi14-548_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 09:51:30 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass0_tfrozen_src30.ximg exists
[Wed Feb 22 09:51:30 2012] Warning: total counts is not > 0
[Wed Feb 22 09:51:30 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Feb 22 09:51:30 2012] Warning: total counts is not > 0
[Wed Feb 22 09:51:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12971_pi14-548_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12971_pi14-548_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 10:06:23 2012] Source 18 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Wed Feb 22 10:06:23 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 10:06:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 10:06:23 2012] Assessing source extent using major
[Wed Feb 22 10:06:23 2012] Source does appear to be extended
[Wed Feb 22 10:06:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 10:56:20 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 10:56:20 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Feb 22 10:56:20 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.378
[Wed Feb 22 10:56:20 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 0.38"
[Wed Feb 22 11:25:41 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass1_src20.ximg exists
[Wed Feb 22 11:25:41 2012] Warning: total counts is not > 0
[Wed Feb 22 11:25:41 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass1_src20_1.ximg exists
[Wed Feb 22 11:25:41 2012] Warning: total counts is not > 0
[Wed Feb 22 11:25:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12971_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12971_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 11:25:41 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Wed Feb 22 11:25:41 2012] Warning: total counts is not > 0
[Wed Feb 22 11:25:41 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Feb 22 11:25:41 2012] Warning: total counts is not > 0
[Wed Feb 22 11:25:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12971_pi14-548_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12971_pi14-548_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 11:36:03 2012] Source 18 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Wed Feb 22 11:36:03 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 11:36:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 11:36:03 2012] Assessing source extent using major
[Wed Feb 22 11:36:03 2012] Source does appear to be extended
[Wed Feb 22 11:36:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 11:45:46 2012] Writing source region out to fullrun_ccd3_acisf12971_pi14-548_pass1_cl_src18_src.reg
[Wed Feb 22 11:45:46 2012] Extracting stamp from image fullrun_ccd3_acisf12971_pi14-548_cl_sm2.00.img.gz, (235, 1001) - (280, 1046)
[Wed Feb 22 11:45:46 2012] Writing fullrun_ccd3_acisf12971_pi14-548_pass1_cl_src18.gif
[Wed Feb 22 11:52:15 2012] ../../acisf12971/products/events/fullrun_ccd3_acisf12971_pi14-548_pass1_cl_src18_src.evt.gz[events] does not have any counts, not extracting products.
[Wed Feb 22 11:54:30 2012] No arf file found
[Wed Feb 22 11:54:51 2012] Updating aperture counts using extracted products
[Wed Feb 22 11:54:51 2012] Error reading totcts from fullrun_ccd3_acisf12971_pi14-548_pass1_cl_src18_src.pi
[Wed Feb 22 11:54:52 2012] No arf file for this source, not re-computing flux
[Wed Feb 22 11:54:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Feb 22 11:54:59 2012] acisf12971/analysis//spectral/fullrun_ccd3_acisf12971_pi14-548_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete