[Wed Feb 22 08:06:24 2012] Detection parameters:
  Position = (384.9, 912.6) = 0 42 39.56 41 14 28.6
  Extent = 0.5" x 0.5", rotation angle = 118 degrees
  Source counts = 26.7 +/- 5.2
  Background counts = 0.3
  Rate = 0.007 +/- 0.001

[Wed Feb 22 08:06:26 2012] Off-axis axis estimate = 2.16'
[Wed Feb 22 09:10:14 2012] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 09:10:14 2012] Initial guess for spatial extent in simple fitting = 0.45"
[Wed Feb 22 09:10:14 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.754
[Wed Feb 22 09:10:14 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 0.45"
[Wed Feb 22 09:51:30 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass0_src23.ximg exists
[Wed Feb 22 09:51:30 2012] Warning: total counts is not > 0
[Wed Feb 22 09:51:30 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass0_src23_1.ximg exists
[Wed Feb 22 09:51:30 2012] Warning: total counts is not > 0
[Wed Feb 22 09:51:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12971_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12971_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 09:51:30 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Wed Feb 22 09:51:30 2012] Warning: total counts is not > 0
[Wed Feb 22 09:51:30 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Feb 22 09:51:30 2012] Warning: total counts is not > 0
[Wed Feb 22 09:51:30 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12971_pi14-548_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12971_pi14-548_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 10:06:23 2012] Source 15 is offset by -3.695786 and -1.895261 pixels which is larger than
2 X fitted extent = 0.455016 x 0.455016, not incorporating fit results
[Wed Feb 22 10:06:23 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 10:06:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 10:06:23 2012] Assessing source extent using major
[Wed Feb 22 10:06:23 2012] Source does appear to be extended
[Wed Feb 22 10:06:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 10:56:20 2012] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 10:56:20 2012] Initial guess for spatial extent in simple fitting = 0.45"
[Wed Feb 22 10:56:20 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.754
[Wed Feb 22 10:56:20 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 0.45"
[Wed Feb 22 11:25:41 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass1_src14.ximg exists
[Wed Feb 22 11:25:41 2012] Warning: total counts is not > 0
[Wed Feb 22 11:25:41 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass1_src14_1.ximg exists
[Wed Feb 22 11:25:41 2012] Warning: total counts is not > 0
[Wed Feb 22 11:25:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12971_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12971_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 11:25:41 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Wed Feb 22 11:25:41 2012] Warning: total counts is not > 0
[Wed Feb 22 11:25:41 2012] fullrun_ccd3_acisf12971_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Wed Feb 22 11:25:41 2012] Warning: total counts is not > 0
[Wed Feb 22 11:25:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12971_pi14-548_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12971_pi14-548_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 11:36:03 2012] Source 15 is offset by 1.207726 and 2.556454 pixels which is larger than
2 X fitted extent = 0.455016 x 0.455016, not incorporating fit results
[Wed Feb 22 11:36:03 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 11:36:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 11:36:03 2012] Assessing source extent using major
[Wed Feb 22 11:36:03 2012] Source does appear to be extended
[Wed Feb 22 11:36:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 11:45:46 2012] Writing source region out to fullrun_ccd3_acisf12971_pi14-548_pass1_cl_src15_src.reg
[Wed Feb 22 11:45:46 2012] Extracting stamp from image fullrun_ccd3_acisf12971_pi14-548_cl_sm2.00.img.gz, (362, 890) - (407, 935)
[Wed Feb 22 11:45:46 2012] Writing fullrun_ccd3_acisf12971_pi14-548_pass1_cl_src15.gif
[Wed Feb 22 11:51:57 2012] ../../acisf12971/products/events/fullrun_ccd3_acisf12971_pi14-548_pass1_cl_src15_src.evt.gz[events] does not have any counts, not extracting products.
[Wed Feb 22 11:54:30 2012] No arf file found
[Wed Feb 22 11:54:51 2012] Updating aperture counts using extracted products
[Wed Feb 22 11:54:51 2012] Error reading totcts from fullrun_ccd3_acisf12971_pi14-548_pass1_cl_src15_src.pi
[Wed Feb 22 11:54:52 2012] No arf file for this source, not re-computing flux
[Wed Feb 22 11:54:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Feb 22 11:54:59 2012] acisf12971/analysis//spectral/fullrun_ccd3_acisf12971_pi14-548_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete