[Wed Feb 22 08:06:22 2012] Detection parameters:
  Position = (647.3, 281.1) = 0 42 15.70 41 17 20.9
  Extent = 0.7" x 0.5", rotation angle = 64 degrees
  Source counts = 32.7 +/- 5.7
  Background counts = 0.3
  Rate = 0.008 +/- 0.001

[Wed Feb 22 08:06:23 2012] Off-axis axis estimate = 5.17'
[Wed Feb 22 08:53:57 2012] Using EEF radius (= 1.25 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 08:53:57 2012] Initial guess for spatial extent in simple fitting = 1.25"
[Wed Feb 22 08:53:57 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.972
[Wed Feb 22 08:53:57 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 1.25"
[Wed Feb 22 09:10:14 2012] fullrun_ccd2_acisf12971_pi14-548_cl_pass0_src10.ximg exists
[Wed Feb 22 09:10:14 2012] Warning: total counts is not > 0
[Wed Feb 22 09:10:14 2012] fullrun_ccd2_acisf12971_pi14-548_cl_pass0_src10_1.ximg exists
[Wed Feb 22 09:10:14 2012] Warning: total counts is not > 0
[Wed Feb 22 09:10:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12971_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12971_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 09:10:14 2012] fullrun_ccd2_acisf12971_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed Feb 22 09:10:14 2012] Warning: total counts is not > 0
[Wed Feb 22 09:10:14 2012] fullrun_ccd2_acisf12971_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Feb 22 09:10:14 2012] Warning: total counts is not > 0
[Wed Feb 22 09:10:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12971_pi14-548_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12971_pi14-548_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 10:06:19 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 13.093972 pixels away
[Wed Feb 22 10:06:19 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 10:06:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 10:06:19 2012] Assessing source extent using major
[Wed Feb 22 10:06:19 2012] Source does appear to be extended
[Wed Feb 22 10:06:19 2012] Computing asymmetry using major and minor axis, asym = 1.42
[Wed Feb 22 10:46:44 2012] Using EEF radius (= 1.25 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 10:46:44 2012] Initial guess for spatial extent in simple fitting = 1.25"
[Wed Feb 22 10:46:44 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.972
[Wed Feb 22 10:46:44 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 1.25"
[Wed Feb 22 10:56:20 2012] fullrun_ccd2_acisf12971_pi14-548_cl_pass1_src6.ximg exists
[Wed Feb 22 10:56:20 2012] Warning: total counts is not > 0
[Wed Feb 22 10:56:20 2012] fullrun_ccd2_acisf12971_pi14-548_cl_pass1_src6_1.ximg exists
[Wed Feb 22 10:56:20 2012] Warning: total counts is not > 0
[Wed Feb 22 10:56:20 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12971_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12971_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 10:56:20 2012] fullrun_ccd2_acisf12971_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed Feb 22 10:56:20 2012] Warning: total counts is not > 0
[Wed Feb 22 10:56:20 2012] fullrun_ccd2_acisf12971_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Feb 22 10:56:20 2012] Warning: total counts is not > 0
[Wed Feb 22 10:56:20 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12971_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12971_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 11:36:00 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 14.767133 pixels away
[Wed Feb 22 11:36:00 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 11:36:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 11:36:00 2012] Assessing source extent using major
[Wed Feb 22 11:36:00 2012] Source does appear to be extended
[Wed Feb 22 11:36:00 2012] Computing asymmetry using major and minor axis, asym = 1.42
[Wed Feb 22 11:41:43 2012] Writing source region out to fullrun_ccd2_acisf12971_pi14-548_pass1_cl_src7_src.reg
[Wed Feb 22 11:41:43 2012] Extracting stamp from image fullrun_ccd2_acisf12971_pi14-548_cl_sm2.00.img.gz, (615, 249) - (679, 313)
[Wed Feb 22 11:41:43 2012] Writing fullrun_ccd2_acisf12971_pi14-548_pass1_cl_src7.gif
[Wed Feb 22 11:43:56 2012] ../../acisf12971/products/events/fullrun_ccd2_acisf12971_pi14-548_pass1_cl_src7_src.evt.gz[events] does not have any counts, not extracting products.
[Wed Feb 22 11:45:45 2012] No arf file found
[Wed Feb 22 11:54:51 2012] Updating aperture counts using extracted products
[Wed Feb 22 11:54:51 2012] Error reading totcts from fullrun_ccd2_acisf12971_pi14-548_pass1_cl_src7_src.pi
[Wed Feb 22 11:54:51 2012] No arf file for this source, not re-computing flux
[Wed Feb 22 11:54:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Feb 22 11:54:58 2012] acisf12971/analysis//spectral/fullrun_ccd2_acisf12971_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete