[Wed Feb 22 08:06:18 2012] Detection parameters:
  Position = (888.1, 77.5) = 0 42 49.24 41 18 15.9
  Extent = 0.5" x 0.5", rotation angle = 125 degrees
  Source counts = 17.8 +/- 4.2
  Background counts = 0.2
  Rate = 0.004 +/- 0.001

[Wed Feb 22 08:06:19 2012] Off-axis axis estimate = 2.09'
[Wed Feb 22 08:08:06 2012] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 08:08:06 2012] Initial guess for spatial extent in simple fitting = 0.44"
[Wed Feb 22 08:08:06 2012] source mask rpix=0.9, npix_max = 7, mask sum = 7, frac = 0.902
[Wed Feb 22 08:08:06 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.44"
[Wed Feb 22 08:28:40 2012] fullrun_ccd0_acisf12971_pi14-548_cl_pass0_src3.ximg exists
[Wed Feb 22 08:28:40 2012] Warning: total counts is not > 0
[Wed Feb 22 08:28:40 2012] fullrun_ccd0_acisf12971_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Feb 22 08:28:40 2012] Warning: total counts is not > 0
[Wed Feb 22 08:28:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12971_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12971_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 08:28:40 2012] fullrun_ccd0_acisf12971_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Feb 22 08:28:40 2012] Warning: total counts is not > 0
[Wed Feb 22 08:28:40 2012] fullrun_ccd0_acisf12971_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Feb 22 08:28:40 2012] Warning: total counts is not > 0
[Wed Feb 22 08:28:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12971_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12971_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 10:06:15 2012] Source 3 is offset by 1.340480 and 3.071260 pixels which is larger than
2 X fitted extent = 0.546776 x 0.546776, not incorporating fit results
[Wed Feb 22 10:06:15 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 10:06:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 10:06:15 2012] Assessing source extent using major
[Wed Feb 22 10:06:15 2012] Source does appear to be extended
[Wed Feb 22 10:06:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 10:06:44 2012] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 10:06:44 2012] Initial guess for spatial extent in simple fitting = 0.44"
[Wed Feb 22 10:06:44 2012] source mask rpix=0.9, npix_max = 7, mask sum = 7, frac = 0.902
[Wed Feb 22 10:06:44 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.44"
[Wed Feb 22 10:22:08 2012] fullrun_ccd0_acisf12971_pi14-548_cl_pass1_src3.ximg exists
[Wed Feb 22 10:22:08 2012] Warning: total counts is not > 0
[Wed Feb 22 10:22:08 2012] fullrun_ccd0_acisf12971_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Feb 22 10:22:08 2012] Warning: total counts is not > 0
[Wed Feb 22 10:22:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12971_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12971_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 10:22:08 2012] fullrun_ccd0_acisf12971_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Feb 22 10:22:09 2012] Warning: total counts is not > 0
[Wed Feb 22 10:22:09 2012] fullrun_ccd0_acisf12971_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Feb 22 10:22:09 2012] Warning: total counts is not > 0
[Wed Feb 22 10:22:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12971_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12971_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 11:35:57 2012] Source 3 is offset by -0.278192 and 2.994614 pixels which is larger than
2 X fitted extent = 0.446406 x 0.446406, not incorporating fit results
[Wed Feb 22 11:35:57 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 11:35:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 11:35:57 2012] Assessing source extent using major
[Wed Feb 22 11:35:57 2012] Source does appear to be extended
[Wed Feb 22 11:35:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 11:36:23 2012] Writing source region out to fullrun_ccd0_acisf12971_pi14-548_pass1_cl_src3_src.reg
[Wed Feb 22 11:36:23 2012] Extracting stamp from image fullrun_ccd0_acisf12971_pi14-548_cl_sm2.00.img.gz, (866, 55) - (911, 100)
[Wed Feb 22 11:36:23 2012] Writing fullrun_ccd0_acisf12971_pi14-548_pass1_cl_src3.gif
[Wed Feb 22 11:36:32 2012] ../../acisf12971/products/events/fullrun_ccd0_acisf12971_pi14-548_pass1_cl_src3_src.evt.gz[events] does not have any counts, not extracting products.
[Wed Feb 22 11:38:03 2012] No arf file found
[Wed Feb 22 11:54:50 2012] Updating aperture counts using extracted products
[Wed Feb 22 11:54:50 2012] Error reading totcts from fullrun_ccd0_acisf12971_pi14-548_pass1_cl_src3_src.pi
[Wed Feb 22 11:54:51 2012] No arf file for this source, not re-computing flux
[Wed Feb 22 11:54:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Feb 22 11:54:56 2012] acisf12971/analysis//spectral/fullrun_ccd0_acisf12971_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete