[Sun Feb 12 10:09:58 2012] Detection parameters:
  Position = (147.0, 530.9) = 0 42 40.64 41 13 27.6
  Extent = 0.5" x 0.5", rotation angle = 36 degrees
  Source counts = 57.5 +/- 7.6
  Background counts = 0.5
  Rate = 0.01 +/- 0.002

[Sun Feb 12 10:10:00 2012] Off-axis axis estimate = 3.23'
[Sun Feb 12 10:54:06 2012] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 10:54:06 2012] Initial guess for spatial extent in simple fitting = 0.63"
[Sun Feb 12 10:54:06 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.268
[Sun Feb 12 10:54:06 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 0.63"
[Sun Feb 12 11:42:10 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src12.ximg exists
[Sun Feb 12 11:42:10 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:10 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src12_1.ximg exists
[Sun Feb 12 11:42:10 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:10 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:42:25 2012] Source 9 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Sun Feb 12 11:42:25 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 11:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 11:42:25 2012] Assessing source extent using major
[Sun Feb 12 11:42:25 2012] Source does appear to be extended
[Sun Feb 12 11:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.06
[Sun Feb 12 12:10:52 2012] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:10:52 2012] Initial guess for spatial extent in simple fitting = 0.63"
[Sun Feb 12 12:10:52 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.268
[Sun Feb 12 12:10:52 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 0.63"
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src6.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src6_1.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:38:04 2012] Source 9 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Sun Feb 12 12:38:04 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 12:38:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 12:38:04 2012] Assessing source extent using major
[Sun Feb 12 12:38:04 2012] Source does appear to be extended
[Sun Feb 12 12:38:04 2012] Computing asymmetry using major and minor axis, asym = 1.06
[Sun Feb 12 12:46:53 2012] Writing source region out to fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src9_src.reg
[Sun Feb 12 12:46:53 2012] Extracting stamp from image fullrun_ccd3_acisf12970_pi14-548_cl_sm2.00.img.gz, (123, 507) - (171, 555)
[Sun Feb 12 12:46:53 2012] Writing fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src9.gif
[Sun Feb 12 12:49:46 2012] ../../acisf12970/products/events/fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src9_src.evt.gz[events] does not have any counts, not extracting products.
[Sun Feb 12 12:53:30 2012] No arf file found
[Sun Feb 12 12:53:38 2012] Updating aperture counts using extracted products
[Sun Feb 12 12:53:38 2012] Error reading totcts from fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src9_src.pi
[Sun Feb 12 12:53:38 2012] No arf file for this source, not re-computing flux
[Sun Feb 12 12:53:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Feb 12 12:53:47 2012] acisf12970/analysis//spectral/fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete