[Sun Feb 12 10:09:58 2012] Detection parameters:
  Position = (328.5, 497.0) = 0 42 32.72 41 13 10.9
  Extent = 0.7" x 0.5", rotation angle = 62 degrees
  Source counts = 25.7 +/- 5.1
  Background counts = 0.3
  Rate = 0.006 +/- 0.001

[Sun Feb 12 10:10:00 2012] Off-axis axis estimate = 4.04'
[Sun Feb 12 10:54:06 2012] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 10:54:06 2012] Initial guess for spatial extent in simple fitting = 0.84"
[Sun Feb 12 10:54:06 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.022
[Sun Feb 12 10:54:06 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 0.84"
[Sun Feb 12 11:42:10 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src26.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src26_1.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:42:25 2012] Source 6 is offset by 7.346220 and 0.718883 pixels which is larger than
2 X fitted extent = 6.846219 x 6.846219, not incorporating fit results
[Sun Feb 12 11:42:25 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 11:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 11:42:25 2012] Assessing source extent using major
[Sun Feb 12 11:42:25 2012] Source does appear to be extended
[Sun Feb 12 11:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.35
[Sun Feb 12 12:10:52 2012] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:10:52 2012] Initial guess for spatial extent in simple fitting = 0.84"
[Sun Feb 12 12:10:52 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.022
[Sun Feb 12 12:10:52 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 0.84"
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src14.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src14_1.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:38:04 2012] Source 6 appears to have -ve number of counts, which is not physical
Fit may be corrupt, not incorporating results
[Sun Feb 12 12:38:04 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 12:38:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 12:38:04 2012] Assessing source extent using major
[Sun Feb 12 12:38:04 2012] Source does appear to be extended
[Sun Feb 12 12:38:04 2012] Computing asymmetry using major and minor axis, asym = 1.35
[Sun Feb 12 12:46:53 2012] Writing source region out to fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src6_src.reg
[Sun Feb 12 12:46:53 2012] Extracting stamp from image fullrun_ccd3_acisf12970_pi14-548_cl_sm2.00.img.gz, (298, 467) - (359, 527)
[Sun Feb 12 12:46:54 2012] Writing fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src6.gif
[Sun Feb 12 12:50:40 2012] ../../acisf12970/products/events/fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src6_src.evt.gz[events] does not have any counts, not extracting products.
[Sun Feb 12 12:53:30 2012] No arf file found
[Sun Feb 12 12:53:38 2012] Updating aperture counts using extracted products
[Sun Feb 12 12:53:38 2012] Error reading totcts from fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src6_src.pi
[Sun Feb 12 12:53:38 2012] No arf file for this source, not re-computing flux
[Sun Feb 12 12:53:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Feb 12 12:53:47 2012] acisf12970/analysis//spectral/fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete