[Sun Feb 12 10:09:59 2012] Detection parameters:
  Position = (71.8, 862.9) = 0 42 43.92 41 16 11.0
  Extent = 0.5" x 0.5", rotation angle = 18 degrees
  Source counts = 23.9 +/- 5.1
  Background counts = 2.1
  Rate = 0.006 +/- 0.001

[Sun Feb 12 10:10:00 2012] Off-axis axis estimate = 0.44'
[Sun Feb 12 10:54:06 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 10:54:06 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Sun Feb 12 10:54:06 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.882
[Sun Feb 12 10:54:06 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 0.40"
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src29.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src29.csv
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src29_1.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src29.csv
[Sun Feb 12 11:42:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Sun Feb 12 11:42:11 2012] Fit fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Sun Feb 12 11:42:25 2012] Source 32 is offset by -3.088973 and -0.355805 pixels which is larger than
2 X fitted extent = 0.401923 x 0.401923, not incorporating fit results
[Sun Feb 12 11:42:25 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 11:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 11:42:25 2012] Assessing source extent using major
[Sun Feb 12 11:42:25 2012] Source does appear to be extended
[Sun Feb 12 11:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 12:10:52 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:10:52 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Sun Feb 12 12:10:52 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.882
[Sun Feb 12 12:10:52 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 0.40"
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src17.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src17.csv
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src17_1.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src17.csv
[Sun Feb 12 12:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Feb 12 12:37:53 2012] Fit fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Sun Feb 12 12:38:04 2012] Source 32 is offset by 2.976108 and -4.280551 pixels which is larger than
2 X fitted extent = 0.401923 x 0.401923, not incorporating fit results
[Sun Feb 12 12:38:04 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 12:38:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 12:38:04 2012] Assessing source extent using major
[Sun Feb 12 12:38:04 2012] Source does appear to be extended
[Sun Feb 12 12:38:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 12:46:54 2012] Writing source region out to fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src32_src.reg
[Sun Feb 12 12:46:54 2012] Extracting stamp from image fullrun_ccd3_acisf12970_pi14-548_cl_sm2.00.img.gz, (49, 840) - (94, 885)
[Sun Feb 12 12:46:54 2012] Writing fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src32.gif
[Sun Feb 12 12:50:51 2012] ../../acisf12970/products/events/fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src32_src.evt.gz[events] does not have any counts, not extracting products.
[Sun Feb 12 12:53:30 2012] No arf file found
[Sun Feb 12 12:53:38 2012] Updating aperture counts using extracted products
[Sun Feb 12 12:53:38 2012] Error reading totcts from fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src32_src.pi
[Sun Feb 12 12:53:38 2012] No arf file for this source, not re-computing flux
[Sun Feb 12 12:53:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Feb 12 12:53:47 2012] acisf12970/analysis//spectral/fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete