[Sun Feb 12 10:09:58 2012] Detection parameters:
  Position = (114.7, 784.6) = 0 42 42.05 41 15 32.5
  Extent = 0.5" x 0.5", rotation angle = 117 degrees
  Source counts = 13.9 +/- 3.9
  Background counts = 1.1
  Rate = 0.004 +/- 0.001

[Sun Feb 12 10:10:00 2012] Off-axis axis estimate = 1.14'
[Sun Feb 12 10:54:06 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 10:54:06 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Feb 12 10:54:06 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.385
[Sun Feb 12 10:54:06 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 0.38"
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src37.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src37_1.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src37.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src37_1.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:42:25 2012] Source 21 is offset by 2.937025 and 2.171854 pixels which is larger than
2 X fitted extent = 0.635711 x 0.635711, not incorporating fit results
[Sun Feb 12 11:42:25 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 11:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 11:42:25 2012] Assessing source extent using major
[Sun Feb 12 11:42:25 2012] Source does appear to be extended
[Sun Feb 12 11:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.11
[Sun Feb 12 12:10:52 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:10:52 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Feb 12 12:10:52 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.385
[Sun Feb 12 12:10:52 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 0.38"
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src25.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src25_1.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src25.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:38:04 2012] Source 21 is offset by 1.984016 and 2.066813 pixels which is larger than
2 X fitted extent = 0.387224 x 0.387224, not incorporating fit results
[Sun Feb 12 12:38:04 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 12:38:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 12:38:04 2012] Assessing source extent using major
[Sun Feb 12 12:38:04 2012] Source does appear to be extended
[Sun Feb 12 12:38:04 2012] Computing asymmetry using major and minor axis, asym = 1.11
[Sun Feb 12 12:46:54 2012] Writing source region out to fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src21_src.reg
[Sun Feb 12 12:46:54 2012] Extracting stamp from image fullrun_ccd3_acisf12970_pi14-548_cl_sm2.00.img.gz, (90, 760) - (140, 809)
[Sun Feb 12 12:46:54 2012] Writing fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src21.gif
[Sun Feb 12 12:51:24 2012] ../../acisf12970/products/events/fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src21_src.evt.gz[events] does not have any counts, not extracting products.
[Sun Feb 12 12:53:30 2012] No arf file found
[Sun Feb 12 12:53:38 2012] Updating aperture counts using extracted products
[Sun Feb 12 12:53:38 2012] Error reading totcts from fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src21_src.pi
[Sun Feb 12 12:53:38 2012] No arf file for this source, not re-computing flux
[Sun Feb 12 12:53:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Feb 12 12:53:47 2012] acisf12970/analysis//spectral/fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete