[Sun Feb 12 10:09:58 2012] Detection parameters:
  Position = (503.0, 557.9) = 0 42 25.11 41 13 40.8
  Extent = 0.7" x 0.5", rotation angle = 77 degrees
  Source counts = 18.7 +/- 4.4
  Background counts = 0.3
  Rate = 0.005 +/- 0.001

[Sun Feb 12 10:10:00 2012] Off-axis axis estimate = 4.61'
[Sun Feb 12 10:54:06 2012] Using EEF radius (= 1.03 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 10:54:06 2012] Initial guess for spatial extent in simple fitting = 1.03"
[Sun Feb 12 10:54:06 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.114
[Sun Feb 12 10:54:06 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 1.03"
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src32.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src32_1.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src32.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:11 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src32_1.ximg exists
[Sun Feb 12 11:42:11 2012] Warning: total counts is not > 0
[Sun Feb 12 11:42:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:42:25 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.689228 pixels away
[Sun Feb 12 11:42:25 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 11:42:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 11:42:25 2012] Assessing source extent using major
[Sun Feb 12 11:42:25 2012] Source does appear to be extended
[Sun Feb 12 11:42:25 2012] Computing asymmetry using major and minor axis, asym = 1.34
[Sun Feb 12 12:10:52 2012] Using EEF radius (= 1.03 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:10:52 2012] Initial guess for spatial extent in simple fitting = 1.03"
[Sun Feb 12 12:10:52 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.114
[Sun Feb 12 12:10:52 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 1.03"
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src20.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src20_1.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Feb 12 12:37:53 2012] Warning: total counts is not > 0
[Sun Feb 12 12:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12970_pi14-548_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:38:04 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 12.689228 pixels away
[Sun Feb 12 12:38:04 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 12:38:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 12:38:04 2012] Assessing source extent using major
[Sun Feb 12 12:38:04 2012] Source does appear to be extended
[Sun Feb 12 12:38:04 2012] Computing asymmetry using major and minor axis, asym = 1.34
[Sun Feb 12 12:46:54 2012] Writing source region out to fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src11_src.reg
[Sun Feb 12 12:46:54 2012] Extracting stamp from image fullrun_ccd3_acisf12970_pi14-548_cl_sm2.00.img.gz, (471, 525) - (535, 590)
[Sun Feb 12 12:46:54 2012] Writing fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src11.gif
[Sun Feb 12 12:51:02 2012] ../../acisf12970/products/events/fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src11_src.evt.gz[events] does not have any counts, not extracting products.
[Sun Feb 12 12:53:30 2012] No arf file found
[Sun Feb 12 12:53:38 2012] Updating aperture counts using extracted products
[Sun Feb 12 12:53:38 2012] Error reading totcts from fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src11_src.pi
[Sun Feb 12 12:53:38 2012] No arf file for this source, not re-computing flux
[Sun Feb 12 12:53:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Feb 12 12:53:47 2012] acisf12970/analysis//spectral/fullrun_ccd3_acisf12970_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete