[Sun Feb 12 10:09:56 2012] Detection parameters:
  Position = (806.8, 129.0) = 0 42 15.23 41 18 1.1
  Extent = 0.8" x 0.6", rotation angle = 69 degrees
  Source counts = 10.8 +/- 3.3
  Background counts = 0.2
  Rate = 0.003 +/- 0.0008

[Sun Feb 12 10:09:57 2012] Off-axis axis estimate = 5.57'
[Sun Feb 12 10:40:11 2012] Using EEF radius (= 1.42 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 10:40:11 2012] Initial guess for spatial extent in simple fitting = 1.42"
[Sun Feb 12 10:40:11 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.911
[Sun Feb 12 10:40:11 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 1.42"
[Sun Feb 12 10:54:06 2012] fullrun_ccd2_acisf12970_pi14-548_cl_pass0_src12.ximg exists
[Sun Feb 12 10:54:06 2012] Warning: total counts is not > 0
[Sun Feb 12 10:54:06 2012] fullrun_ccd2_acisf12970_pi14-548_cl_pass0_src12_1.ximg exists
[Sun Feb 12 10:54:06 2012] Warning: total counts is not > 0
[Sun Feb 12 10:54:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12970_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12970_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 10:54:06 2012] fullrun_ccd2_acisf12970_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sun Feb 12 10:54:06 2012] Warning: total counts is not > 0
[Sun Feb 12 10:54:06 2012] fullrun_ccd2_acisf12970_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Feb 12 10:54:06 2012] Warning: total counts is not > 0
[Sun Feb 12 10:54:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12970_pi14-548_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12970_pi14-548_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:42:20 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 16.172733 pixels away
[Sun Feb 12 11:42:20 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 11:42:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 11:42:20 2012] Assessing source extent using major
[Sun Feb 12 11:42:20 2012] Source does appear to be extended
[Sun Feb 12 11:42:20 2012] Computing asymmetry using major and minor axis, asym = 1.40
[Sun Feb 12 12:00:43 2012] Using EEF radius (= 1.42 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 12:00:43 2012] Initial guess for spatial extent in simple fitting = 1.42"
[Sun Feb 12 12:00:43 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.911
[Sun Feb 12 12:00:43 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 1.42"
[Sun Feb 12 12:10:52 2012] fullrun_ccd2_acisf12970_pi14-548_cl_pass1_src9.ximg exists
[Sun Feb 12 12:10:52 2012] Warning: total counts is not > 0
[Sun Feb 12 12:10:52 2012] fullrun_ccd2_acisf12970_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Feb 12 12:10:52 2012] Warning: total counts is not > 0
[Sun Feb 12 12:10:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12970_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12970_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:10:52 2012] fullrun_ccd2_acisf12970_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Feb 12 12:10:52 2012] Warning: total counts is not > 0
[Sun Feb 12 12:10:52 2012] fullrun_ccd2_acisf12970_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Feb 12 12:10:52 2012] Warning: total counts is not > 0
[Sun Feb 12 12:10:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12970_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12970_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:38:00 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 16.517530 pixels away
[Sun Feb 12 12:38:00 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 12:38:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 12:38:00 2012] Assessing source extent using major
[Sun Feb 12 12:38:00 2012] Source does appear to be extended
[Sun Feb 12 12:38:00 2012] Computing asymmetry using major and minor axis, asym = 1.40
[Sun Feb 12 12:44:41 2012] Writing source region out to fullrun_ccd2_acisf12970_pi14-548_pass1_cl_src13_src.reg
[Sun Feb 12 12:44:41 2012] Extracting stamp from image fullrun_ccd2_acisf12970_pi14-548_cl_sm2.00.img.gz, (769, 91) - (845, 167)
[Sun Feb 12 12:44:41 2012] Writing fullrun_ccd2_acisf12970_pi14-548_pass1_cl_src13.gif
[Sun Feb 12 12:46:28 2012] ../../acisf12970/products/events/fullrun_ccd2_acisf12970_pi14-548_pass1_cl_src13_src.evt.gz[events] does not have any counts, not extracting products.
[Sun Feb 12 12:46:53 2012] No arf file found
[Sun Feb 12 12:53:38 2012] Updating aperture counts using extracted products
[Sun Feb 12 12:53:38 2012] Error reading totcts from fullrun_ccd2_acisf12970_pi14-548_pass1_cl_src13_src.pi
[Sun Feb 12 12:53:38 2012] No arf file for this source, not re-computing flux
[Sun Feb 12 12:53:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Feb 12 12:53:45 2012] acisf12970/analysis//spectral/fullrun_ccd2_acisf12970_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete