[Sun Feb 12 10:09:54 2012] Detection parameters:
  Position = (546.0, 904.1) = 0 43 3.20 41 15 28.2
  Extent = 0.6" x 0.5", rotation angle = 5 degrees
  Source counts = 263.1 +/- 16.3
  Background counts = 1.9
  Rate = 0.07 +/- 0.004

[Sun Feb 12 10:09:55 2012] Off-axis axis estimate = 3.80'
[Sun Feb 12 10:20:41 2012] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 10:20:41 2012] Initial guess for spatial extent in simple fitting = 0.77"
[Sun Feb 12 10:20:41 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.936
[Sun Feb 12 10:20:41 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.77"
[Sun Feb 12 10:40:11 2012] fullrun_ccd1_acisf12970_pi14-548_cl_pass0_src3.ximg exists
[Sun Feb 12 10:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12970_pi14-548_cl_pass0_src3.csv
[Sun Feb 12 10:40:11 2012] fullrun_ccd1_acisf12970_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Feb 12 10:40:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12970_pi14-548_cl_pass0_src3.csv
[Sun Feb 12 10:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12970_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12970_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 10:40:11 2012] fullrun_ccd1_acisf12970_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Feb 12 10:40:11 2012] fullrun_ccd1_acisf12970_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Feb 12 10:40:11 2012] Fit fullrun_ccd1_acisf12970_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Feb 12 11:42:18 2012] Spatial fit model total counts = 5.906000, observed total counts = 7.000000
[Sun Feb 12 11:42:18 2012] Offset between fit and detection position for source 2 = 1.386766 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.386766 pixels
  Position = (547.2, 904.7) = 0 43 3.16 41 15 28.2
  Extent = 1.4" x 0.4", rotation angle = 2
  Source counts = 6.2 +/- 2.5
  Background counts = 0.0
  Rate = 0.04 +/- 0.02
[Sun Feb 12 11:42:18 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 11:42:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 11:42:18 2012] Assessing source extent using major
[Sun Feb 12 11:42:18 2012] Source does appear to be extended
[Sun Feb 12 11:42:18 2012] Computing asymmetry using major and minor axis, asym = 3.50
[Sun Feb 12 11:42:18 2012] Source is asymmetric
[Sun Feb 12 11:49:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:49:23 2012] Initial guess for spatial extent in simple fitting = 0.88"
[Sun Feb 12 11:49:23 2012] Spatial fitting skipped for pass 1: source                                 has 6.2 net counts, is at off-axis angle 3.8'
[Sun Feb 12 12:37:59 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 12:37:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 12:37:59 2012] Assessing source extent using major
[Sun Feb 12 12:37:59 2012] Source does appear to be extended
[Sun Feb 12 12:37:59 2012] Computing asymmetry using major and minor axis, asym = 3.50
[Sun Feb 12 12:37:59 2012] Source is asymmetric
[Sun Feb 12 12:40:01 2012] Writing source region out to fullrun_ccd1_acisf12970_pi14-548_pass1_cl_src2_src.reg
[Sun Feb 12 12:40:01 2012] Extracting stamp from image fullrun_ccd1_acisf12970_pi14-548_cl_sm2.00.img.gz, (485, 842) - (610, 967)
[Sun Feb 12 12:40:01 2012] Writing fullrun_ccd1_acisf12970_pi14-548_pass1_cl_src2.gif
[Sun Feb 12 12:40:48 2012] Size of ../../acisf12970/products/events/fullrun_ccd1_acisf12970_pi14-548_pass1_cl_src2_src.evt.gz[events] = 7 counts
[Sun Feb 12 12:40:48 2012] Mean chipx,y = (369.57, 932.57)
[Sun Feb 12 12:40:48 2012] Mean tdetx,y = (4199.43, 4476.57)
[Sun Feb 12 12:40:48 2012] chipx,y range = (348.00-378.00, 915.00-949.00)
[Sun Feb 12 12:40:48 2012] Size of ../../acisf12970/products/events/fullrun_ccd1_acisf12970_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 1 counts
[Sun Feb 12 12:40:49 2012] Not generating rmf since there are only 6 counts
[Sun Feb 12 12:40:49 2012] arf not found, will run specextract
[Sun Feb 12 12:41:19 2012] ../../acisf12970/products/spectra/fullrun_ccd1_acisf12970_pi14-548_pass1_cl_src2.warf not found
[Sun Feb 12 12:41:19 2012] ../../acisf12970/products/spectra/fullrun_ccd1_acisf12970_pi14-548_pass1_cl_src2.wrmf not found
[Sun Feb 12 12:41:19 2012] Removal of ../../acisf12970/products/spectra/fullrun_ccd1_acisf12970_pi14-548_pass1_cl_src2.soff failed
[Sun Feb 12 12:44:40 2012] Spectrum 2 has only 6 counts, deleting rmf
[Sun Feb 12 12:44:41 2012] 199.028
[Sun Feb 12 12:53:37 2012] Updating aperture counts using extracted products
[Sun Feb 12 12:53:37 2012] Error reading totcts from fullrun_ccd1_acisf12970_pi14-548_pass1_cl_src2_src.pi.gz
[Sun Feb 12 12:53:38 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 12:53:38 2012] Using photon index=1.80, rate=0.0421, arf fullrun_ccd1_acisf12970_pi14-548_pass1_cl_src2.arf
[Sun Feb 12 12:53:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 12:53:38 2012] Updating source flux to 4.8e-13
[Sun Feb 12 12:53:43 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 12 12:53:44 2012] acisf12970/analysis//spectral/fullrun_ccd1_acisf12970_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete