[Sun Feb 12 10:09:55 2012] Detection parameters:
  Position = (878.4, 1019.0) = 0 42 48.69 41 16 24.8
  Extent = 0.5" x 0.5", rotation angle = 31 degrees
  Source counts = 16.7 +/- 4.1
  Background counts = 0.3
  Rate = 0.004 +/- 0.001

[Sun Feb 12 10:09:55 2012] Off-axis axis estimate = 0.92'
[Sun Feb 12 10:20:41 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 10:20:41 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Feb 12 10:20:41 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.925
[Sun Feb 12 10:20:41 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 0.38"
[Sun Feb 12 10:40:11 2012] fullrun_ccd1_acisf12970_pi14-548_cl_pass0_src15.ximg exists
[Sun Feb 12 10:40:11 2012] Warning: total counts is not > 0
[Sun Feb 12 10:40:11 2012] fullrun_ccd1_acisf12970_pi14-548_cl_pass0_src15_1.ximg exists
[Sun Feb 12 10:40:11 2012] Warning: total counts is not > 0
[Sun Feb 12 10:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12970_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12970_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 10:40:11 2012] fullrun_ccd1_acisf12970_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Sun Feb 12 10:40:11 2012] Warning: total counts is not > 0
[Sun Feb 12 10:40:11 2012] fullrun_ccd1_acisf12970_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Feb 12 10:40:11 2012] Warning: total counts is not > 0
[Sun Feb 12 10:40:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12970_pi14-548_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12970_pi14-548_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:42:18 2012] Source 15 is offset by -0.874129 and 1.167986 pixels which is larger than
2 X fitted extent = 0.386545 x 0.386545, not incorporating fit results
[Sun Feb 12 11:42:18 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 11:42:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 11:42:18 2012] Assessing source extent using major
[Sun Feb 12 11:42:18 2012] Source does appear to be extended
[Sun Feb 12 11:42:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 11:49:23 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:49:23 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Feb 12 11:49:23 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.925
[Sun Feb 12 11:49:23 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 0.38"
[Sun Feb 12 12:00:43 2012] fullrun_ccd1_acisf12970_pi14-548_cl_pass1_src10.ximg exists
[Sun Feb 12 12:00:43 2012] Warning: total counts is not > 0
[Sun Feb 12 12:00:43 2012] fullrun_ccd1_acisf12970_pi14-548_cl_pass1_src10_1.ximg exists
[Sun Feb 12 12:00:43 2012] Warning: total counts is not > 0
[Sun Feb 12 12:00:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12970_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12970_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:00:43 2012] fullrun_ccd1_acisf12970_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sun Feb 12 12:00:43 2012] Warning: total counts is not > 0
[Sun Feb 12 12:00:43 2012] fullrun_ccd1_acisf12970_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Feb 12 12:00:43 2012] Warning: total counts is not > 0
[Sun Feb 12 12:00:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12970_pi14-548_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12970_pi14-548_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:37:59 2012] Source 15 is offset by 2.229186 and 5.621655 pixels which is larger than
2 X fitted extent = 0.386545 x 0.386545, not incorporating fit results
[Sun Feb 12 12:37:59 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 12:37:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 12:37:59 2012] Assessing source extent using major
[Sun Feb 12 12:37:59 2012] Source does appear to be extended
[Sun Feb 12 12:37:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 12:40:02 2012] Writing source region out to fullrun_ccd1_acisf12970_pi14-548_pass1_cl_src15_src.reg
[Sun Feb 12 12:40:02 2012] Extracting stamp from image fullrun_ccd1_acisf12970_pi14-548_cl_sm2.00.img.gz, (856, 997) - (901, 1019)
[Sun Feb 12 12:40:02 2012] Writing fullrun_ccd1_acisf12970_pi14-548_pass1_cl_src15.gif
[Sun Feb 12 12:44:12 2012] ../../acisf12970/products/events/fullrun_ccd1_acisf12970_pi14-548_pass1_cl_src15_src.evt.gz[events] does not have any counts, not extracting products.
[Sun Feb 12 12:44:41 2012] No arf file found
[Sun Feb 12 12:53:38 2012] Updating aperture counts using extracted products
[Sun Feb 12 12:53:38 2012] Error reading totcts from fullrun_ccd1_acisf12970_pi14-548_pass1_cl_src15_src.pi
[Sun Feb 12 12:53:38 2012] No arf file for this source, not re-computing flux
[Sun Feb 12 12:53:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Feb 12 12:53:44 2012] acisf12970/analysis//spectral/fullrun_ccd1_acisf12970_pi14-548_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete