[Sun Feb 12 10:09:53 2012] Detection parameters:
  Position = (974.6, 36.1) = 0 42 52.40 41 16 49.0
  Extent = 0.5" x 0.5", rotation angle = 45 degrees
  Source counts = 11.9 +/- 3.5
  Background counts = 0.1
  Rate = 0.003 +/- 0.0009

[Sun Feb 12 10:09:54 2012] Off-axis axis estimate = 1.60'
[Sun Feb 12 10:11:21 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 10:11:21 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Sun Feb 12 10:11:21 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.876
[Sun Feb 12 10:11:21 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 0.40"
[Sun Feb 12 10:20:41 2012] fullrun_ccd0_acisf12970_pi14-548_cl_pass0_src9.ximg exists
[Sun Feb 12 10:20:41 2012] Warning: total counts is not > 0
[Sun Feb 12 10:20:41 2012] fullrun_ccd0_acisf12970_pi14-548_cl_pass0_src9_1.ximg exists
[Sun Feb 12 10:20:41 2012] Warning: total counts is not > 0
[Sun Feb 12 10:20:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12970_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12970_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 10:20:41 2012] fullrun_ccd0_acisf12970_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun Feb 12 10:20:41 2012] Warning: total counts is not > 0
[Sun Feb 12 10:20:41 2012] fullrun_ccd0_acisf12970_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Feb 12 10:20:41 2012] Warning: total counts is not > 0
[Sun Feb 12 10:20:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12970_pi14-548_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12970_pi14-548_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:42:16 2012] Source 18 is offset by 0.527549 and 1.756890 pixels which is larger than
2 X fitted extent = 0.511846 x 0.511846, not incorporating fit results
[Sun Feb 12 11:42:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 11:42:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 11:42:16 2012] Assessing source extent using major
[Sun Feb 12 11:42:16 2012] Source does appear to be extended
[Sun Feb 12 11:42:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 11:42:45 2012] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sun Feb 12 11:42:45 2012] Initial guess for spatial extent in simple fitting = 0.40"
[Sun Feb 12 11:42:45 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.876
[Sun Feb 12 11:42:45 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 0.40"
[Sun Feb 12 11:49:23 2012] fullrun_ccd0_acisf12970_pi14-548_cl_pass1_src7.ximg exists
[Sun Feb 12 11:49:23 2012] Warning: total counts is not > 0
[Sun Feb 12 11:49:23 2012] fullrun_ccd0_acisf12970_pi14-548_cl_pass1_src7_1.ximg exists
[Sun Feb 12 11:49:23 2012] Warning: total counts is not > 0
[Sun Feb 12 11:49:23 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12970_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12970_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 11:49:23 2012] fullrun_ccd0_acisf12970_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sun Feb 12 11:49:23 2012] Warning: total counts is not > 0
[Sun Feb 12 11:49:23 2012] fullrun_ccd0_acisf12970_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sun Feb 12 11:49:23 2012] Warning: total counts is not > 0
[Sun Feb 12 11:49:23 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12970_pi14-548_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12970_pi14-548_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb 12 12:37:58 2012] Source 18 is offset by 1.602644 and 2.317947 pixels which is larger than
2 X fitted extent = 0.647675 x 0.647675, not incorporating fit results
[Sun Feb 12 12:37:58 2012] Vigneting correction estimate = 1.000000
[Sun Feb 12 12:37:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb 12 12:37:58 2012] Assessing source extent using major
[Sun Feb 12 12:37:58 2012] Source does appear to be extended
[Sun Feb 12 12:37:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 12:38:24 2012] Writing source region out to fullrun_ccd0_acisf12970_pi14-548_pass1_cl_src18_src.reg
[Sun Feb 12 12:38:24 2012] Extracting stamp from image fullrun_ccd0_acisf12970_pi14-548_cl_sm2.00.img.gz, (952, 14) - (997, 59)
[Sun Feb 12 12:38:24 2012] Writing fullrun_ccd0_acisf12970_pi14-548_pass1_cl_src18.gif
[Sun Feb 12 12:39:58 2012] ../../acisf12970/products/events/fullrun_ccd0_acisf12970_pi14-548_pass1_cl_src18_src.evt.gz[events] does not have any counts, not extracting products.
[Sun Feb 12 12:40:01 2012] No arf file found
[Sun Feb 12 12:53:37 2012] Updating aperture counts using extracted products
[Sun Feb 12 12:53:37 2012] Error reading totcts from fullrun_ccd0_acisf12970_pi14-548_pass1_cl_src18_src.pi
[Sun Feb 12 12:53:37 2012] No arf file for this source, not re-computing flux
[Sun Feb 12 12:53:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Feb 12 12:53:43 2012] acisf12970/analysis//spectral/fullrun_ccd0_acisf12970_pi14-548_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete