[Sun Nov 27 16:08:41 2011] Detection parameters:
  Position = (155.9, 319.5) = 3 27 28.99 -13 23 57.0
  Extent = 0.8" x 0.6", rotation angle = 4 degrees
  Source counts = 13.8 +/- 4.0
  Background counts = 2.2
  Rate = 0.0002 +/- 7e-05

[Sun Nov 27 16:08:41 2011] Off-axis axis estimate = 2.07'
[Sun Nov 27 16:54:42 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 16:54:42 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Sun Nov 27 16:54:42 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.779
[Sun Nov 27 16:54:42 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.44"
[Sun Nov 27 17:21:39 2011] fullrun_ccd3_acisf12960_pi14-548_cl_pass0_src18.ximg exists
[Sun Nov 27 17:21:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12960_pi14-548_cl_pass0_src18.csv
[Sun Nov 27 17:21:39 2011] fullrun_ccd3_acisf12960_pi14-548_cl_pass0_src18_1.ximg exists
[Sun Nov 27 17:21:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12960_pi14-548_cl_pass0_src18.csv
[Sun Nov 27 17:21:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12960_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12960_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 17:21:39 2011] fullrun_ccd3_acisf12960_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Sun Nov 27 17:21:39 2011] fullrun_ccd3_acisf12960_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Nov 27 17:21:39 2011] Fit fullrun_ccd3_acisf12960_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Sun Nov 27 18:05:36 2011] Spatial fit model total counts = 16.478400, observed total counts = 17.000000
[Sun Nov 27 18:05:36 2011] Offset between fit and detection position for source 9 = 0.828821 pixels
[Sun Nov 27 18:05:36 2011] 16.445390 total counts/ 3.080990 bgd. counts: snr = 7.613850
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.828821 pixels
  Position = (156.1, 320.3) = 3 27 29.00 -13 23 56.8
  Extent = 0.7 (0.3-1.1)", rotation angle = 0
  Source counts = 13.4 +/- 4.1
  Background counts = 3.1
  Rate = 0.0002 +/- 7e-05
[Sun Nov 27 18:05:36 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 18:05:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 18:05:36 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 18:05:36 2011] Source does appear to be extended
[Sun Nov 27 18:05:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 18:46:11 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Nov 27 18:46:11 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Sun Nov 27 18:46:11 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.195
[Sun Nov 27 18:46:11 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.65"
[Sun Nov 27 19:09:27 2011] fullrun_ccd3_acisf12960_pi14-548_cl_pass1_src17.ximg exists
[Sun Nov 27 19:09:27 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12960_pi14-548_cl_pass1_src17.csv
[Sun Nov 27 19:09:27 2011] fullrun_ccd3_acisf12960_pi14-548_cl_pass1_src17_1.ximg exists
[Sun Nov 27 19:09:27 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12960_pi14-548_cl_pass1_src17.csv
[Sun Nov 27 19:09:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12960_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12960_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 19:09:27 2011] fullrun_ccd3_acisf12960_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Sun Nov 27 19:09:27 2011] fullrun_ccd3_acisf12960_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Nov 27 19:09:27 2011] Fit fullrun_ccd3_acisf12960_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Sun Nov 27 20:29:27 2011] Spatial fit model total counts = 16.227700, observed total counts = 17.000000
[Sun Nov 27 20:29:27 2011] Offset between fit and detection position for source 9 = 0.043130 pixels
[Sun Nov 27 20:29:27 2011] 16.116420 total counts/ 3.372820 bgd. counts: snr = 6.938979
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.043130 pixels
  Position = (156.1, 320.3) = 3 27 29.00 -13 23 56.8
  Extent = 0.6 (0.3-0.9)", rotation angle = 0
  Source counts = 12.7 +/- 4.0
  Background counts = 3.4
  Rate = 0.0002 +/- 7e-05
[Sun Nov 27 20:29:27 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 20:29:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 20:29:27 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 20:29:27 2011] Source does appear to be extended
[Sun Nov 27 20:29:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 20:51:21 2011] Writing source region out to fullrun_ccd3_acisf12960_pi14-548_pass1_cl_src9_src.reg
[Sun Nov 27 20:51:21 2011] Extracting stamp from image fullrun_ccd3_acisf12960_pi14-548_cl_sm2.00.img.gz, (129, 293) - (184, 348)
[Sun Nov 27 20:51:21 2011] Writing fullrun_ccd3_acisf12960_pi14-548_pass1_cl_src9.gif
[Sun Nov 27 21:00:37 2011] Size of ../../acisf12960/products/events/fullrun_ccd3_acisf12960_pi14-548_pass1_cl_src9_src.evt.gz[events] = 14 counts
[Sun Nov 27 21:00:37 2011] Mean chipx,y = (717.14, 927.64)
[Sun Nov 27 21:00:37 2011] Mean tdetx,y = (4204.36, 3778.14)
[Sun Nov 27 21:00:37 2011] chipx,y range = (704.00-736.00, 910.00-941.00)
[Sun Nov 27 21:00:37 2011] Size of ../../acisf12960/products/events/fullrun_ccd3_acisf12960_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 15 counts
[Sun Nov 27 21:00:38 2011] Not generating rmf since there are only 12 counts
[Sun Nov 27 21:00:38 2011] arf not found, will run specextract
[Sun Nov 27 21:01:13 2011] ../../acisf12960/products/spectra/fullrun_ccd3_acisf12960_pi14-548_pass1_cl_src9.warf not found
[Sun Nov 27 21:01:13 2011] ../../acisf12960/products/spectra/fullrun_ccd3_acisf12960_pi14-548_pass1_cl_src9.wrmf not found
[Sun Nov 27 21:01:13 2011] Removal of ../../acisf12960/products/spectra/fullrun_ccd3_acisf12960_pi14-548_pass1_cl_src9.soff failed
[Sun Nov 27 21:10:27 2011] Spectrum 9 has only 13 counts, deleting rmf
[Sun Nov 27 21:10:27 2011] 196.455
[Sun Nov 27 21:13:26 2011] Updating aperture counts using extracted products
[Sun Nov 27 21:13:26 2011] Error reading totcts from fullrun_ccd3_acisf12960_pi14-548_pass1_cl_src9_src.pi.gz
[Sun Nov 27 21:13:26 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 21:13:26 2011] Using photon index=1.80, rate=0.000213, arf fullrun_ccd3_acisf12960_pi14-548_pass1_cl_src9.arf
[Sun Nov 27 21:13:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Nov 27 21:13:26 2011] Updating source flux to 2.5e-15
[Sun Nov 27 21:13:47 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting