[Thu May 24 00:49:33 2012] Detection parameters:
  Position = (980.0, 905.1) = 15 0 51.26 1 52 53.5
  Extent = 2.6" x 2.3", rotation angle = 163 degrees
  Source counts = 37.6 +/- 9.7
  Background counts = 57.4
  Rate = 0.0003 +/- 7e-05

[Thu May 24 00:49:34 2012] Off-axis axis estimate = 9.16'
[Thu May 24 03:53:40 2012] Using EEF radius (= 3.71 ")to estimate initial spatial extent for simple fitting
[Thu May 24 03:53:40 2012] Initial guess for spatial extent in simple fitting = 3.71"
[Thu May 24 03:53:40 2012] source mask rpix=7.5, npix_max = 258, mask sum = 256, frac = 0.991
[Thu May 24 03:53:40 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 3.71"
[Thu May 24 04:38:42 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src15.ximg exists
[Thu May 24 04:38:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src15.csv
[Thu May 24 04:38:42 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src15_1.ximg exists
[Thu May 24 04:38:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src15.csv
[Thu May 24 04:38:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 04:38:42 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Thu May 24 04:38:42 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Thu May 24 04:38:42 2012] Fit fullrun_ccd6_acisf12952_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Thu May 24 06:14:14 2012] Spatial fit model total counts = 117.994000, observed total counts = 118.000000
[Thu May 24 06:14:14 2012] Offset between fit and detection position for source 36 = 4.537525 pixels
[Thu May 24 06:14:14 2012] 118.348100 total counts/ 97.362900 bgd. counts: snr = 2.126750
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 4.537525 pixels
  Position = (975.5, 905.7) = 15 0 51.42 1 52 53.6
  Extent = 2.8 (1.2-7.4)", rotation angle = 0
  Source counts = 21.0 +/- 10.9
  Background counts = 97.4
  Rate = 0.0001 +/- 8e-05
[Thu May 24 06:14:14 2012] Vigneting correction estimate = 1.000000
[Thu May 24 06:14:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 06:14:14 2012] Assessing source extent using major axis lower bound
[Thu May 24 06:14:14 2012] Source does appear to be extended
[Thu May 24 06:14:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 08:32:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 08:32:40 2012] Initial guess for spatial extent in simple fitting = 2.82"
[Thu May 24 08:32:40 2012] source mask rpix=5.7, npix_max = 155, mask sum = 169, frac = 1.089
[Thu May 24 08:32:40 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 2.82"
[Thu May 24 09:17:41 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass1_src15.ximg exists
[Thu May 24 09:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12952_pi14-548_cl_pass1_src15.csv
[Thu May 24 09:17:41 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass1_src15_1.ximg exists
[Thu May 24 09:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12952_pi14-548_cl_pass1_src15.csv
[Thu May 24 09:17:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12952_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12952_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 09:17:41 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Thu May 24 09:17:41 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Thu May 24 09:17:41 2012] Fit fullrun_ccd6_acisf12952_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Thu May 24 10:33:52 2012] Source 36 is offset by -4.006199 and 7.071297 pixels which is larger than
2 X fitted extent = 2.863862 x 2.863862, not incorporating fit results
[Thu May 24 10:33:52 2012] Vigneting correction estimate = 1.000000
[Thu May 24 10:33:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 10:33:52 2012] Assessing source extent using major axis lower bound
[Thu May 24 10:33:52 2012] Source does appear to be extended
[Thu May 24 10:33:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 10:50:40 2012] Writing source region out to fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src36_src.reg
[Thu May 24 10:50:40 2012] Extracting stamp from image fullrun_ccd6_acisf12952_pi14-548_cl_sm2.00.img.gz, (847, 777) - (1104, 1035)
[Thu May 24 10:50:40 2012] Writing fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src36.gif
[Thu May 24 11:00:49 2012] Size of ../../acisf12952/products/events/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src36_src.evt.gz[events] = 104 counts
[Thu May 24 11:00:49 2012] Mean chipx,y = (150.34, 216.56)
[Thu May 24 11:00:49 2012] Mean tdetx,y = (3025.34, 1918.56)
[Thu May 24 11:00:49 2012] chipx,y range = (117.00-186.00, 185.00-253.00)
[Thu May 24 11:00:49 2012] Size of ../../acisf12952/products/events/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 702 counts
[Thu May 24 11:00:50 2012] Not generating rmf since there are only 20 counts
[Thu May 24 11:00:50 2012] arf not found, will run specextract
[Thu May 24 11:01:08 2012] ../../acisf12952/products/spectra/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src36.warf not found
[Thu May 24 11:01:08 2012] ../../acisf12952/products/spectra/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src36.wrmf not found
[Thu May 24 11:01:08 2012] Removal of ../../acisf12952/products/spectra/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src36.soff failed
[Thu May 24 11:13:06 2012] Spectrum 36 has only 21 counts, deleting rmf
[Thu May 24 11:13:06 2012] 169.179
[Thu May 24 11:34:04 2012] Updating aperture counts using extracted products
[Thu May 24 11:34:04 2012] Error reading totcts from fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src36_src.pi.gz
[Thu May 24 11:34:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 11:34:04 2012] Using photon index=1.80, rate=0.000147, arf fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src36.arf
[Thu May 24 11:34:04 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May 24 11:34:04 2012] Updating source flux to 1.8e-15
[Thu May 24 11:34:54 2012] Flag b found in src. 36 procflags, skipping spectral fitting
[Thu May 24 11:34:54 2012] Source 36 has fewer than 100.000000 counts, skipping spectral fitting