[Thu May 24 00:49:33 2012] Detection parameters:
  Position = (429.8, 262.1) = 15 1 9.31 1 47 37.2
  Extent = 0.6" x 0.6", rotation angle = 72 degrees
  Source counts = 12.9 +/- 4.0
  Background counts = 3.1
  Rate = 9e-05 +/- 3e-05

[Thu May 24 00:49:34 2012] Off-axis axis estimate = 2.91'
[Thu May 24 03:53:40 2012] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Thu May 24 03:53:40 2012] Initial guess for spatial extent in simple fitting = 0.56"
[Thu May 24 03:53:40 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.112
[Thu May 24 03:53:40 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 0.56"
[Thu May 24 04:38:42 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src28.ximg exists
[Thu May 24 04:38:42 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src28.csv
[Thu May 24 04:38:42 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src28_1.ximg exists
[Thu May 24 04:38:42 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src28.csv
[Thu May 24 04:38:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 04:38:42 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Thu May 24 04:38:42 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Thu May 24 04:38:42 2012] Fit fullrun_ccd6_acisf12952_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Thu May 24 06:14:14 2012] Spatial fit model total counts = 24.996900, observed total counts = 25.000000
[Thu May 24 06:14:14 2012] Offset between fit and detection position for source 13 = 0.274571 pixels
[Thu May 24 06:14:14 2012] 25.267100 total counts/ 13.336300 bgd. counts: snr = 3.267021
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.274571 pixels
  Position = (430.0, 262.3) = 15 1 9.32 1 47 37.1
  Extent = 0.6 (0.4-1.1)", rotation angle = 0
  Source counts = 11.9 +/- 5.0
  Background counts = 13.3
  Rate = 8e-05 +/- 4e-05
[Thu May 24 06:14:14 2012] Vigneting correction estimate = 1.000000
[Thu May 24 06:14:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 06:14:14 2012] Assessing source extent using major axis lower bound
[Thu May 24 06:14:14 2012] Source does appear to be extended
[Thu May 24 06:14:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 08:32:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 08:32:40 2012] Initial guess for spatial extent in simple fitting = 0.64"
[Thu May 24 08:32:40 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.931
[Thu May 24 08:32:40 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 0.64"
[Thu May 24 09:17:41 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass1_src27.ximg exists
[Thu May 24 09:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12952_pi14-548_cl_pass1_src27.csv
[Thu May 24 09:17:41 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass1_src27_1.ximg exists
[Thu May 24 09:17:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12952_pi14-548_cl_pass1_src27.csv
[Thu May 24 09:17:41 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12952_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12952_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 09:17:41 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Thu May 24 09:17:41 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Thu May 24 09:17:41 2012] Fit fullrun_ccd6_acisf12952_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Thu May 24 10:33:52 2012] Spatial fit model total counts = 24.999800, observed total counts = 25.000000
[Thu May 24 10:33:52 2012] Offset between fit and detection position for source 13 = 0.024010 pixels
[Thu May 24 10:33:52 2012] 25.285900 total counts/ 13.472700 bgd. counts: snr = 3.218402
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.024010 pixels
  Position = (430.0, 262.3) = 15 1 9.32 1 47 37.1
  Extent = 0.6 (0.4-1.1)", rotation angle = 0
  Source counts = 11.8 +/- 5.0
  Background counts = 13.5
  Rate = 8e-05 +/- 4e-05
[Thu May 24 10:33:52 2012] Vigneting correction estimate = 1.000000
[Thu May 24 10:33:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 10:33:52 2012] Assessing source extent using major axis lower bound
[Thu May 24 10:33:52 2012] Source does appear to be extended
[Thu May 24 10:33:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 10:50:41 2012] Writing source region out to fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src13_src.reg
[Thu May 24 10:50:41 2012] Extracting stamp from image fullrun_ccd6_acisf12952_pi14-548_cl_sm2.00.img.gz, (401, 234) - (459, 291)
[Thu May 24 10:50:41 2012] Writing fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src13.gif
[Thu May 24 11:08:43 2012] Size of ../../acisf12952/products/events/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src13_src.evt.gz[events] = 16 counts
[Thu May 24 11:08:43 2012] Mean chipx,y = (893.50, 614.31)
[Thu May 24 11:08:43 2012] Mean tdetx,y = (3768.50, 2316.31)
[Thu May 24 11:08:43 2012] chipx,y range = (878.00-913.00, 598.00-635.00)
[Thu May 24 11:08:43 2012] Size of ../../acisf12952/products/events/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 47 counts
[Thu May 24 11:08:44 2012] Not generating rmf since there are only 11 counts
[Thu May 24 11:08:44 2012] arf not found, will run specextract
[Thu May 24 11:09:11 2012] ../../acisf12952/products/spectra/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src13.warf not found
[Thu May 24 11:09:11 2012] ../../acisf12952/products/spectra/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src13.wrmf not found
[Thu May 24 11:09:11 2012] Removal of ../../acisf12952/products/spectra/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src13.soff failed
[Thu May 24 11:13:07 2012] Spectrum 13 has only 12 counts, deleting rmf
[Thu May 24 11:13:07 2012] 204.506
[Thu May 24 11:34:04 2012] Updating aperture counts using extracted products
[Thu May 24 11:34:04 2012] Error reading totcts from fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src13_src.pi.gz
[Thu May 24 11:34:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 11:34:04 2012] Using photon index=1.80, rate=8.26e-05, arf fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src13.arf
[Thu May 24 11:34:04 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May 24 11:34:04 2012] Updating source flux to 8.9e-16
[Thu May 24 11:34:54 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting