[Thu May 24 00:49:33 2012] Detection parameters:
  Position = (590.0, 950.7) = 15 1 4.06 1 53 16.0
  Extent = 4.3" x 3.5", rotation angle = 114 degrees
  Source counts = 206.7 +/- 17.6
  Background counts = 101.3
  Rate = 0.001 +/- 0.0001

[Thu May 24 00:49:34 2012] Off-axis axis estimate = 8.59'
[Thu May 24 03:53:40 2012] Using EEF radius (= 3.26 ")to estimate initial spatial extent for simple fitting
[Thu May 24 03:53:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 03:53:40 2012] Initial guess for spatial extent in simple fitting = 3.26"
[Thu May 24 03:53:40 2012] source mask rpix=6.6, npix_max = 202, mask sum = 189, frac = 0.931
[Thu May 24 03:53:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.26"
[Thu May 24 04:38:42 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src1.ximg exists
[Thu May 24 04:38:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src1.csv
[Thu May 24 04:38:42 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src1_1.ximg exists
[Thu May 24 04:38:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src1.csv
[Thu May 24 04:38:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12952_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 04:38:42 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu May 24 04:38:42 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 24 04:38:42 2012] Fit fullrun_ccd6_acisf12952_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 24 06:14:14 2012] Spatial fit model total counts = 331.158000, observed total counts = 328.000000
[Thu May 24 06:14:14 2012] Offset between fit and detection position for source 1 = 0.894043 pixels
[Thu May 24 06:14:14 2012] 332.014000 total counts/ 113.434000 bgd. counts: snr = 20.522903
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.894043 pixels
  Position = (589.5, 951.4) = 15 1 4.09 1 53 16.1
  Extent = 4.0 (3.5-4.7)", rotation angle = 0
  Source counts = 218.6 +/- 18.2
  Background counts = 113.4
  Rate = 0.002 +/- 0.0001
[Thu May 24 06:14:14 2012] Vigneting correction estimate = 1.000000
[Thu May 24 06:14:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 06:14:14 2012] Assessing source extent using major axis lower bound
[Thu May 24 06:14:14 2012] Source does appear to be extended
[Thu May 24 06:14:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 08:32:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 08:32:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 08:32:40 2012] Initial guess for spatial extent in simple fitting = 3.98"
[Thu May 24 08:32:40 2012] source mask rpix=8.1, npix_max = 294, mask sum = 272, frac = 0.922
[Thu May 24 08:32:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.98"
[Thu May 24 09:17:41 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass1_src1.ximg exists
[Thu May 24 09:17:41 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass1_src1_1.ximg exists
[Thu May 24 09:17:41 2012] Fit fullrun_ccd6_acisf12952_pi14-548_cl_pass1_src1 appears to have run properly
[Thu May 24 09:17:41 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu May 24 09:17:41 2012] fullrun_ccd6_acisf12952_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 24 09:17:41 2012] Fit fullrun_ccd6_acisf12952_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 24 10:33:52 2012] Spatial fit model total counts = 380.570000, observed total counts = 378.000000
[Thu May 24 10:33:52 2012] Offset between fit and detection position for source 1 = 0.286060 pixels
[Thu May 24 10:33:52 2012] 381.268000 total counts/ 159.311000 bgd. counts: snr = 17.585145
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.286060 pixels
  Position = (589.8, 951.3) = 15 1 4.08 1 53 16.1
  Extent = 4.0 (3.6-4.6)", rotation angle = 0
  Source counts = 222.0 +/- 19.5
  Background counts = 159.3
  Rate = 0.002 +/- 0.0001
[Thu May 24 10:33:52 2012] Vigneting correction estimate = 1.000000
[Thu May 24 10:33:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 10:33:52 2012] Assessing source extent using major axis lower bound
[Thu May 24 10:33:52 2012] Source does appear to be extended
[Thu May 24 10:33:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 10:50:40 2012] Writing source region out to fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src1_src.reg
[Thu May 24 10:50:40 2012] Extracting stamp from image fullrun_ccd6_acisf12952_pi14-548_cl_sm2.00.img.gz, (405, 767) - (774, 1136)
[Thu May 24 10:50:40 2012] Writing fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src1.gif
[Thu May 24 10:50:43 2012] Size of ../../acisf12952/products/events/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src1_src.evt.gz[events] = 352 counts
[Thu May 24 10:50:43 2012] Mean chipx,y = (188.34, 606.71)
[Thu May 24 10:50:43 2012] Mean tdetx,y = (3063.34, 2308.71)
[Thu May 24 10:50:43 2012] chipx,y range = (140.00-235.00, 567.00-655.00)
[Thu May 24 10:50:43 2012] Size of ../../acisf12952/products/events/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1245 counts
[Thu May 24 10:50:44 2012] rmf not found, will run specextract
[Thu May 24 10:50:44 2012] arf not found, will run specextract
[Thu May 24 10:51:17 2012] ../../acisf12952/products/spectra/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src1.warf not found
[Thu May 24 10:51:17 2012] ../../acisf12952/products/spectra/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src1.wrmf not found
[Thu May 24 10:51:17 2012] Removal of ../../acisf12952/products/spectra/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src1.soff failed
[Thu May 24 11:13:06 2012] Keeping rmf generated by specextract
[Thu May 24 11:13:06 2012] 166.699
[Thu May 24 11:34:04 2012] Updating aperture counts using extracted products
[Thu May 24 11:34:04 2012] Error reading totcts from fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src1_src.pi.gz
[Thu May 24 11:34:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 11:34:04 2012] Using photon index=1.80, rate=0.00155, arf fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src1.arf
[Thu May 24 11:34:04 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May 24 11:34:04 2012] Updating source flux to 1.9e-14
[Thu May 24 11:35:05 2012] Reading fit data from acisf12952/analysis//spectral/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src1_pl.csv
[Thu May 24 11:35:05 2012] Spectral fit parameter nH value = 2.29225e+21
[Thu May 24 11:35:05 2012] Spectral fit parameter PhoIndex value = 1.54711
[Thu May 24 11:35:05 2012] Failed to get F(0.3-8.0) from acisf12952/analysis//spectral/fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May 24 11:35:05 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 11:35:05 2012] Using Nh = 2.3e+21, photon index=1.55, rate=0.00155, arf fullrun_ccd6_acisf12952_pi14-548_pass1_cl_src1.arf
[Thu May 24 11:35:05 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May 24 11:35:05 2012] Updating source flux to 2.2e-14