[Tue Apr 24 11:04:07 2012] Detection parameters:
  Position = (470.3, 287.7) = 15 1 52.75 1 48 36.5
  Extent = 2.5" x 1.7", rotation angle = 167 degrees
  Source counts = 43.9 +/- 10.5
  Background counts = 66.1
  Rate = 0.0006 +/- 0.0001

[Tue Apr 24 11:04:07 2012] Off-axis axis estimate = 11.86'
[Tue Apr 24 11:11:46 2012] Using EEF radius (= 6.28 ")to estimate initial spatial extent for simple fitting
[Tue Apr 24 11:11:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 24 11:11:46 2012] Initial guess for spatial extent in simple fitting = 6.28"
[Tue Apr 24 11:11:46 2012] source mask rpix=12.8, npix_max = 702, mask sum = 711, frac = 1.012
[Tue Apr 24 11:11:46 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 6.28"
[Tue Apr 24 11:49:03 2012] fullrun_ccd2_acisf12951_pi14-548_cl_pass0_src7.ximg exists
[Tue Apr 24 11:49:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12951_pi14-548_cl_pass0_src7.csv
[Tue Apr 24 11:49:03 2012] fullrun_ccd2_acisf12951_pi14-548_cl_pass0_src7_1.ximg exists
[Tue Apr 24 11:49:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12951_pi14-548_cl_pass0_src7.csv
[Tue Apr 24 11:49:03 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12951_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12951_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 24 11:49:03 2012] fullrun_ccd2_acisf12951_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Tue Apr 24 11:49:03 2012] fullrun_ccd2_acisf12951_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Apr 24 11:49:03 2012] Fit fullrun_ccd2_acisf12951_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Apr 24 14:52:13 2012] Spatial fit model total counts = 218.000000, observed total counts = 218.000000
[Tue Apr 24 14:52:13 2012] Offset between fit and detection position for source 7 = 2.913879 pixels
[Tue Apr 24 14:52:13 2012] 217.953700 total counts/ 159.641000 bgd. counts: snr = 4.615204
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 2.913879 pixels
  Position = (471.8, 285.2) = 15 1 52.71 1 48 35.0
  Extent = 6.6 (3.7-10.4)", rotation angle = 0
  Source counts = 58.3 +/- 14.8
  Background counts = 159.6
  Rate = 0.0008 +/- 0.0002
[Tue Apr 24 14:52:13 2012] Vigneting correction estimate = 1.000000
[Tue Apr 24 14:52:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 24 14:52:13 2012] Assessing source extent using major axis lower bound
[Tue Apr 24 14:52:13 2012] Source does appear to be extended
[Tue Apr 24 14:52:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 24 14:52:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 24 14:52:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Apr 24 14:52:49 2012] Initial guess for spatial extent in simple fitting = 6.56"
[Tue Apr 24 14:52:49 2012] source mask rpix=13.3, npix_max = 765, mask sum = 773, frac = 1.010
[Tue Apr 24 14:52:49 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 6.56"
[Tue Apr 24 15:23:07 2012] fullrun_ccd2_acisf12951_pi14-548_cl_pass1_src5.ximg exists
[Tue Apr 24 15:23:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12951_pi14-548_cl_pass1_src5.csv
[Tue Apr 24 15:23:07 2012] fullrun_ccd2_acisf12951_pi14-548_cl_pass1_src5_1.ximg exists
[Tue Apr 24 15:23:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12951_pi14-548_cl_pass1_src5.csv
[Tue Apr 24 15:23:07 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12951_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12951_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 24 15:23:07 2012] fullrun_ccd2_acisf12951_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Tue Apr 24 15:23:07 2012] fullrun_ccd2_acisf12951_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Apr 24 15:23:07 2012] Fit fullrun_ccd2_acisf12951_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Apr 24 18:10:38 2012] Warning, spatial fit 5 centroid is now closest to src. 14
[Tue Apr 24 18:10:38 2012] Source 5 in spatial fitting is no longer close to this source
[Tue Apr 24 18:10:38 2012] Vigneting correction estimate = 1.000000
[Tue Apr 24 18:10:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 24 18:10:38 2012] Assessing source extent using major axis lower bound
[Tue Apr 24 18:10:38 2012] Source does appear to be extended
[Tue Apr 24 18:10:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 24 18:11:12 2012] Writing source region out to fullrun_ccd2_acisf12951_pi14-548_pass1_cl_src7_src.reg
[Tue Apr 24 18:11:12 2012] Extracting stamp from image fullrun_ccd2_acisf12951_pi14-548_cl_sm2.00.img.gz, (172, 0) - (772, 585)
[Tue Apr 24 18:11:12 2012] Writing fullrun_ccd2_acisf12951_pi14-548_pass1_cl_src7.gif
[Tue Apr 24 18:13:46 2012] Size of ../../acisf12951/products/events/fullrun_ccd2_acisf12951_pi14-548_pass1_cl_src7_src.evt.gz[events] = 196 counts
[Tue Apr 24 18:13:46 2012] Mean chipx,y = (451.88, 865.62)
[Tue Apr 24 18:13:46 2012] Mean tdetx,y = (3926.62, 3634.12)
[Tue Apr 24 18:13:46 2012] chipx,y range = (383.00-515.00, 803.00-927.00)
[Tue Apr 24 18:13:46 2012] Size of ../../acisf12951/products/events/fullrun_ccd2_acisf12951_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 1706 counts
[Tue Apr 24 18:13:47 2012] Not generating rmf since there are only 58 counts
[Tue Apr 24 18:13:47 2012] arf not found, will run specextract
[Tue Apr 24 18:14:16 2012] ../../acisf12951/products/spectra/fullrun_ccd2_acisf12951_pi14-548_pass1_cl_src7.warf not found
[Tue Apr 24 18:14:16 2012] ../../acisf12951/products/spectra/fullrun_ccd2_acisf12951_pi14-548_pass1_cl_src7.wrmf not found
[Tue Apr 24 18:14:16 2012] Removal of ../../acisf12951/products/spectra/fullrun_ccd2_acisf12951_pi14-548_pass1_cl_src7.soff failed
[Tue Apr 24 18:15:36 2012] Spectrum 7 has only 58 counts, deleting rmf
[Tue Apr 24 18:15:36 2012] 154.398
[Tue Apr 24 18:56:32 2012] Updating aperture counts using extracted products
[Tue Apr 24 18:56:32 2012] Error reading totcts from fullrun_ccd2_acisf12951_pi14-548_pass1_cl_src7_src.pi.gz
[Tue Apr 24 18:56:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 24 18:56:33 2012] Using photon index=1.80, rate=0.000788, arf fullrun_ccd2_acisf12951_pi14-548_pass1_cl_src7.arf
[Tue Apr 24 18:56:33 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Apr 24 18:56:33 2012] Updating source flux to 1.1e-14
[Tue Apr 24 18:56:40 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Apr 24 18:56:44 2012] acisf12951/analysis//spectral/fullrun_ccd2_acisf12951_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete