[Wed May  1 14:28:13 2013] Detection parameters:
  Position = (554.1, 910.5) = 13 25 26.95 -31 41 47.7
  Extent = 0.8" x 0.5", rotation angle = 36 degrees
  Source counts = 10.7 +/- 3.3
  Background counts = 0.3
  Rate = 0.001 +/- 0.0003

[Wed May  1 14:28:13 2013] Off-axis axis estimate = 3.44'
[Wed May  1 14:45:02 2013] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Wed May  1 14:45:02 2013] Initial guess for spatial extent in simple fitting = 0.68"
[Wed May  1 14:45:02 2013] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.850
[Wed May  1 14:45:02 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 0.68"
[Wed May  1 14:50:40 2013] fullrun_ccd6_acisf12937_pi14-548_cl_pass0_src4.ximg exists
[Wed May  1 14:50:40 2013] fullrun_ccd6_acisf12937_pi14-548_cl_pass0_src4_1.ximg exists
[Wed May  1 14:50:40 2013] Fit fullrun_ccd6_acisf12937_pi14-548_cl_pass0_src4 appears to have run properly
[Wed May  1 14:50:40 2013] fullrun_ccd6_acisf12937_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Wed May  1 14:50:40 2013] fullrun_ccd6_acisf12937_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May  1 14:50:40 2013] Fit fullrun_ccd6_acisf12937_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Wed May  1 15:00:07 2013] Spatial fit model total counts = 10.577000, observed total counts = 11.000000
[Wed May  1 15:00:07 2013] Offset between fit and detection position for source 10 = 1.309464 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.309464 pixels
  Position = (555.1, 911.3) = 13 25 26.93 -31 41 47.5
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 10.2 +/- 3.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Wed May  1 15:00:07 2013] Vigneting correction estimate = 1.000000
[Wed May  1 15:00:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 15:00:07 2013] Assessing source extent using major axis lower bound
[Wed May  1 15:00:07 2013] Source does appear to be extended
[Wed May  1 15:00:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 15:11:57 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 15:11:57 2013] Initial guess for spatial extent in simple fitting = 0.65"
[Wed May  1 15:11:57 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.897
[Wed May  1 15:11:57 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 0.65"
[Wed May  1 15:17:21 2013] fullrun_ccd6_acisf12937_pi14-548_cl_pass1_src4.ximg exists
[Wed May  1 15:17:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12937_pi14-548_cl_pass1_src4.csv
[Wed May  1 15:17:21 2013] fullrun_ccd6_acisf12937_pi14-548_cl_pass1_src4_1.ximg exists
[Wed May  1 15:17:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12937_pi14-548_cl_pass1_src4.csv
[Wed May  1 15:17:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12937_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12937_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 15:17:21 2013] fullrun_ccd6_acisf12937_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Wed May  1 15:17:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12937_pi14-548_cl_pass1_tfrozen_src4.csv
[Wed May  1 15:17:21 2013] fullrun_ccd6_acisf12937_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Wed May  1 15:17:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12937_pi14-548_cl_pass1_tfrozen_src4.csv
[Wed May  1 15:17:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12937_pi14-548_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12937_pi14-548_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 15:27:59 2013] Spatial fit model total counts = 9.396130, observed total counts = 11.000000
[Wed May  1 15:27:59 2013] Offset between fit and detection position for source 10 = 0.040794 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.040794 pixels
  Position = (555.2, 911.4) = 13 25 26.93 -31 41 47.5
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source counts = 8.9 +/- 3.0
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0003
[Wed May  1 15:27:59 2013] Vigneting correction estimate = 1.000000
[Wed May  1 15:27:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 15:27:59 2013] Assessing source extent using major axis lower bound
[Wed May  1 15:27:59 2013] Source does appear to be extended
[Wed May  1 15:27:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 15:29:51 2013] Writing source region out to fullrun_ccd6_acisf12937_pi14-548_pass1_cl_src10_src.reg
[Wed May  1 15:29:51 2013] Extracting stamp from image fullrun_ccd6_acisf12937_pi14-548_cl_sm2.00.img.gz, (527, 883) - (583, 940)
[Wed May  1 15:29:51 2013] Writing fullrun_ccd6_acisf12937_pi14-548_pass1_cl_src10.gif
[Wed May  1 15:31:41 2013] Size of ../../acisf12937/products/events/fullrun_ccd6_acisf12937_pi14-548_pass1_cl_src10_src.evt.gz[events] = 10 counts
[Wed May  1 15:31:41 2013] Mean chipx,y = (806.50, 508.80)
[Wed May  1 15:31:41 2013] Mean tdetx,y = (3681.50, 2210.80)
[Wed May  1 15:31:41 2013] chipx,y range = (793.00-824.00, 498.00-529.00)
[Wed May  1 15:31:41 2013] Size of ../../acisf12937/products/events/fullrun_ccd6_acisf12937_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 3 counts
[Wed May  1 15:31:42 2013] Not generating rmf since there are only 8 counts
[Wed May  1 15:31:42 2013] arf not found, will run specextract
[Wed May  1 15:32:08 2013] ../../acisf12937/products/spectra/fullrun_ccd6_acisf12937_pi14-548_pass1_cl_src10.warf not found
[Wed May  1 15:32:08 2013] ../../acisf12937/products/spectra/fullrun_ccd6_acisf12937_pi14-548_pass1_cl_src10.wrmf not found
[Wed May  1 15:32:08 2013] Removal of ../../acisf12937/products/spectra/fullrun_ccd6_acisf12937_pi14-548_pass1_cl_src10.soff failed
[Wed May  1 15:35:51 2013] Spectrum 10 has only 9 counts, deleting rmf
[Wed May  1 15:35:51 2013] 201.145
[Wed May  1 15:41:00 2013] Updating aperture counts using extracted products
[Wed May  1 15:41:00 2013] Total counts from fullrun_ccd6_acisf12937_pi14-548_pass1_cl_src10_src.pi.gz = 10.00
[Wed May  1 15:41:00 2013] Total counts from fullrun_ccd6_acisf12937_pi14-548_pass1_cl_src10_bgd.pi.gz = 3.00
[Wed May  1 15:41:01 2013] Got source and background scale factors 0.000001, 0.000014
[Wed May  1 15:41:01 2013] User source parameters:
  Position = (555.2, 911.4) = 13 25 26.93 -31 41 47.5
  Extent = 0.6 (0.5-0.9)", rotation angle = 0
  Source aperture counts = 9.7 +/- 4.3
  Background aperture counts = 0.3
  Rate = 0.001 +/- 0.0004

[Wed May  1 15:41:01 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 15:41:01 2013] Using photon index=1.80, rate=0.000883, arf fullrun_ccd6_acisf12937_pi14-548_pass1_cl_src10.arf
[Wed May  1 15:41:01 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  1 15:41:01 2013] Updating source flux to 9.6e-15
[Wed May  1 15:41:08 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  1 15:41:09 2013] acisf12937/analysis//spectral/fullrun_ccd6_acisf12937_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete