[Fri Oct  7 06:50:24 2011] Detection parameters:
  Position = (898.6, 697.6) = 17 56 48.15 66 32 2.0
  Extent = 1.1" x 0.6", rotation angle = 170 degrees
  Source counts = 59.5 +/- 7.8
  Background counts = 1.5
  Rate = 0.002 +/- 0.0002

[Fri Oct  7 06:50:26 2011] Off-axis axis estimate = 5.28'
[Fri Oct  7 06:51:43 2011] Using EEF radius (= 1.29 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 06:51:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 06:51:43 2011] Initial guess for spatial extent in simple fitting = 1.29"
[Fri Oct  7 06:51:43 2011] source mask rpix=2.6, npix_max = 39, mask sum = 49, frac = 1.250
[Fri Oct  7 06:51:43 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.29"
[Fri Oct  7 06:51:44 2011] fullrun_ccd2_acisf12936_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct  7 06:51:44 2011] fullrun_ccd2_acisf12936_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct  7 06:51:44 2011] Fit fullrun_ccd2_acisf12936_pi14-548_cl_pass0_src1 appears to have run properly
[Fri Oct  7 06:51:44 2011] fullrun_ccd2_acisf12936_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct  7 06:51:44 2011] fullrun_ccd2_acisf12936_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct  7 06:51:44 2011] Fit fullrun_ccd2_acisf12936_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct  7 06:51:59 2011] Spatial fit model total counts = 62.590700, observed total counts = 63.000000
[Fri Oct  7 06:51:59 2011] Offset between fit and detection position for source 1 = 0.590195 pixels
[Fri Oct  7 06:51:59 2011] 64.569070 total counts/ 5.072570 bgd. counts: snr = 26.416629
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.590195 pixels
  Position = (898.4, 698.1) = 17 56 48.20 66 32 2.0
  Extent = 1.6" x 0.6", rotation angle = 4
  Source counts = 59.5 +/- 8.0
  Background counts = 5.1
  Rate = 0.002 +/- 0.0002
[Fri Oct  7 06:51:59 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 06:51:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 06:51:59 2011] Assessing source extent using major
[Fri Oct  7 06:51:59 2011] Source does appear to be extended
[Fri Oct  7 06:51:59 2011] Computing asymmetry using major and minor axis, asym = 2.47
[Fri Oct  7 06:51:59 2011] Source is asymmetric
[Fri Oct  7 06:52:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 06:52:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 06:52:25 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Fri Oct  7 06:52:25 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.991
[Fri Oct  7 06:52:25 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.11"
[Fri Oct  7 06:52:25 2011] fullrun_ccd2_acisf12936_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct  7 06:52:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12936_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 06:52:25 2011] fullrun_ccd2_acisf12936_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct  7 06:52:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12936_pi14-548_cl_pass1_src1.csv
[Fri Oct  7 06:52:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12936_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12936_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 06:52:31 2011] fullrun_ccd2_acisf12936_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct  7 06:52:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12936_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Oct  7 06:52:31 2011] fullrun_ccd2_acisf12936_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct  7 06:52:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12936_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Oct  7 06:52:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12936_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12936_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 06:52:50 2011] Spatial fit model total counts = 56.348000, observed total counts = 63.000000
[Fri Oct  7 06:52:50 2011] Offset between fit and detection position for source 1 = 0.205246 pixels
[Fri Oct  7 06:52:50 2011] 57.370511 total counts/ 0.007811 bgd. counts: snr = 649.049671
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.205246 pixels
  Position = (898.4, 698.3) = 17 56 48.20 66 32 2.1
  Extent = 1.0 (0.9-1.2)", rotation angle = 0
  Source counts = 57.4 +/- 7.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0002
[Fri Oct  7 06:52:50 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 06:52:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 06:52:50 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 06:52:50 2011] Source does appear to be extended
[Fri Oct  7 06:52:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 06:56:37 2011] Not overwriting source region fullrun_ccd2_acisf12936_pi14-548_pass1_cl_src1_src.reg
[Fri Oct  7 06:56:37 2011] Extracting stamp from image fullrun_ccd2_acisf12936_pi14-548_cl_sm2.00.img.gz, (851, 651) - (945, 745)
[Fri Oct  7 06:56:37 2011] Writing fullrun_ccd2_acisf12936_pi14-548_pass1_cl_src1.gif
[Fri Oct  7 06:56:38 2011] ../../acisf12936/products/events/fullrun_ccd2_acisf12936_pi14-548_pass1_cl_src1_src.evt and ../../acisf12936/products/events/fullrun_ccd2_acisf12936_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct  7 06:56:38 2011] Size of ../../acisf12936/products/events/fullrun_ccd2_acisf12936_pi14-548_pass1_cl_src1_src.evt.gz[events] = 63 counts
[Fri Oct  7 06:56:38 2011] Mean chipx,y = (640.24, 731.17)
[Fri Oct  7 06:56:38 2011] Mean tdetx,y = (3792.17, 3445.76)
[Fri Oct  7 06:56:38 2011] chipx,y range = (622.00-658.00, 711.00-752.00)
[Fri Oct  7 06:56:38 2011] Size of ../../acisf12936/products/events/fullrun_ccd2_acisf12936_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 14 counts
[Fri Oct  7 06:56:38 2011] ../../acisf12936/products/images/fullrun_ccd2_acisf12936_pi14-548_pass1_cl_src1_src.img and ../../acisf12936/products/images/fullrun_ccd2_acisf12936_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct  7 06:56:38 2011] ../../acisf12936/products/spectra/fullrun_ccd2_acisf12936_pi14-548_pass1_cl_src1_src.pi and ../../acisf12936/products/spectra/fullrun_ccd2_acisf12936_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct  7 06:56:38 2011] Not generating rmf since there are only 57 counts
[Fri Oct  7 06:57:00 2011] ../../acisf12936/products/lightcurves/fullrun_ccd2_acisf12936_pi14-548_pass1_cl_src1_src.lc and ../../acisf12936/products/lightcurves/fullrun_ccd2_acisf12936_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct  7 07:00:59 2011] 174.394
[Fri Oct  7 07:03:09 2011] Updating aperture counts using extracted products
[Fri Oct  7 07:03:09 2011] Error reading totcts from fullrun_ccd2_acisf12936_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct  7 07:03:09 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 07:03:09 2011] Using photon index=1.80, rate=0.00166, arf fullrun_ccd2_acisf12936_pi14-548_pass1_cl_src1.arf
[Fri Oct  7 07:03:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 07:03:09 2011] Updating source flux to 2.2e-14
[Fri Oct  7 07:03:29 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct  7 07:03:30 2011] acisf12936/analysis//spectral/fullrun_ccd2_acisf12936_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete