[Wed Oct 19 04:54:40 2011] Detection parameters:
  Position = (1003.3, 837.4) = 17 55 17.45 66 32 25.7
  Extent = 1.7" x 1.2", rotation angle = 70 degrees
  Source counts = 747.0 +/- 28.0
  Background counts = 39.0
  Rate = 0.04 +/- 0.002

[Wed Oct 19 04:54:41 2011] Off-axis axis estimate = 7.77'
[Wed Oct 19 04:55:16 2011] Using EEF radius (= 2.67 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 04:55:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 04:55:16 2011] Initial guess for spatial extent in simple fitting = 2.67"
[Wed Oct 19 04:55:16 2011] source mask rpix=5.4, npix_max = 140, mask sum = 144, frac = 1.025
[Wed Oct 19 04:55:16 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.67"
[Wed Oct 19 04:55:17 2011] fullrun_ccd3_acisf12935_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 19 04:55:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12935_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 04:55:18 2011] fullrun_ccd3_acisf12935_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 19 04:55:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12935_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 04:55:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12935_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12935_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 04:55:18 2011] fullrun_ccd3_acisf12935_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 19 04:55:18 2011] fullrun_ccd3_acisf12935_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 19 04:55:18 2011] Fit fullrun_ccd3_acisf12935_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 19 04:55:25 2011] Spatial fit model total counts = 792.994000, observed total counts = 793.000000
[Wed Oct 19 04:55:25 2011] Offset between fit and detection position for source 1 = 0.629107 pixels
[Wed Oct 19 04:55:25 2011] 792.186700 total counts/ 75.047700 bgd. counts: snr = 82.781759
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.629107 pixels
  Position = (1003.7, 837.9) = 17 55 17.45 66 32 25.7
  Extent = 2.3 (2.1-2.4)", rotation angle = 0
  Source counts = 717.1 +/- 28.1
  Background counts = 75.0
  Rate = 0.04 +/- 0.002
[Wed Oct 19 04:55:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 04:55:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 04:55:25 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 04:55:25 2011] Source does appear to be extended
[Wed Oct 19 04:55:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 04:55:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 04:55:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 04:55:41 2011] Initial guess for spatial extent in simple fitting = 2.26"
[Wed Oct 19 04:55:41 2011] source mask rpix=4.6, npix_max = 104, mask sum = 100, frac = 0.962
[Wed Oct 19 04:55:41 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.26"
[Wed Oct 19 04:55:41 2011] fullrun_ccd3_acisf12935_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 19 04:55:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12935_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 04:55:41 2011] fullrun_ccd3_acisf12935_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 19 04:55:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12935_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 04:55:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12935_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12935_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 04:55:41 2011] fullrun_ccd3_acisf12935_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 19 04:55:41 2011] fullrun_ccd3_acisf12935_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 19 04:55:41 2011] Fit fullrun_ccd3_acisf12935_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 19 04:55:49 2011] Spatial fit model total counts = 787.999000, observed total counts = 788.000000
[Wed Oct 19 04:55:49 2011] Offset between fit and detection position for source 1 = 0.121810 pixels
[Wed Oct 19 04:55:49 2011] 786.988000 total counts/ 125.774000 bgd. counts: snr = 58.958524
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.121810 pixels
  Position = (1003.8, 837.8) = 17 55 17.45 66 32 25.6
  Extent = 2.0 (1.9-2.2)", rotation angle = 0
  Source counts = 661.2 +/- 28.1
  Background counts = 125.8
  Rate = 0.04 +/- 0.002
[Wed Oct 19 04:55:49 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 04:55:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 04:55:49 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 04:55:49 2011] Source does appear to be extended
[Wed Oct 19 04:55:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 04:57:17 2011] Not overwriting source region fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 19 04:57:17 2011] Extracting stamp from image fullrun_ccd3_acisf12935_pi14-548_cl_sm2.00.img.gz, (911, 745) - (1097, 931)
[Wed Oct 19 04:57:17 2011] Writing fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1.gif
[Wed Oct 19 04:57:18 2011] ../../acisf12935/products/events/fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1_src.evt and ../../acisf12935/products/events/fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 19 04:57:18 2011] Size of ../../acisf12935/products/events/fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1_src.evt.gz[events] = 764 counts
[Wed Oct 19 04:57:18 2011] Mean chipx,y = (35.18, 769.41)
[Wed Oct 19 04:57:18 2011] Mean tdetx,y = (4362.59, 3096.18)
[Wed Oct 19 04:57:18 2011] chipx,y range = (10.00-61.00, 737.00-800.00)
[Wed Oct 19 04:57:18 2011] Size of ../../acisf12935/products/events/fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 36 counts
[Wed Oct 19 04:57:18 2011] ../../acisf12935/products/images/fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1_src.img and ../../acisf12935/products/images/fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 19 04:57:18 2011] ../../acisf12935/products/spectra/fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1_src.pi and ../../acisf12935/products/spectra/fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 19 04:57:21 2011] ../../acisf12935/products/lightcurves/fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1_src.lc and ../../acisf12935/products/lightcurves/fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 19 04:57:51 2011] Keeping rmf generated by specextract
[Wed Oct 19 04:57:51 2011] 163.899
[Wed Oct 19 04:57:54 2011] Updating aperture counts using extracted products
[Wed Oct 19 04:57:54 2011] Error reading totcts from fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 19 04:57:54 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 04:57:54 2011] Using photon index=1.80, rate=0.0393, arf fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1.arf
[Wed Oct 19 04:57:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 04:57:54 2011] Updating source flux to 5.6e-13
[Wed Oct 19 04:58:03 2011] Reading fit data from acisf12935/analysis//spectral/fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct 19 04:58:03 2011] Spectral fit parameter nH value = 8.43421e+20
[Wed Oct 19 04:58:03 2011] Spectral fit parameter PhoIndex value = 2.13294
[Wed Oct 19 04:58:03 2011] Failed to get F(0.3-8.0) from acisf12935/analysis//spectral/fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct 19 04:58:03 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 04:58:03 2011] Using Nh = 8.4e+20, photon index=2.13, rate=0.0393, arf fullrun_ccd3_acisf12935_pi14-548_pass1_cl_src1.arf
[Wed Oct 19 04:58:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 04:58:03 2011] Updating source flux to 5.1e-13