[Wed Oct 19 04:54:39 2011] Detection parameters:
  Position = (939.8, 868.1) = 17 56 48.20 66 32 1.6
  Extent = 0.5" x 0.5", rotation angle = 50 degrees
  Source counts = 32.6 +/- 5.7
  Background counts = 0.4
  Rate = 0.002 +/- 0.0003

[Wed Oct 19 04:54:39 2011] Off-axis axis estimate = 2.46'
[Wed Oct 19 04:55:15 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 04:55:15 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Wed Oct 19 04:55:15 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.016
[Wed Oct 19 04:55:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.49"
[Wed Oct 19 04:55:16 2011] fullrun_ccd1_acisf12935_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 19 04:55:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12935_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 04:55:16 2011] fullrun_ccd1_acisf12935_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 19 04:55:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12935_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 04:55:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12935_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12935_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 04:55:16 2011] fullrun_ccd1_acisf12935_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 19 04:55:16 2011] fullrun_ccd1_acisf12935_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 19 04:55:16 2011] Fit fullrun_ccd1_acisf12935_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 19 04:55:22 2011] Spatial fit model total counts = 32.551700, observed total counts = 33.000000
[Wed Oct 19 04:55:22 2011] Offset between fit and detection position for source 7 = 0.727040 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.727040 pixels
  Position = (940.3, 868.6) = 17 56 48.20 66 32 1.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 32.6 +/- 5.7
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Wed Oct 19 04:55:22 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 04:55:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 04:55:22 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 04:55:22 2011] Source does appear to be extended
[Wed Oct 19 04:55:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 04:55:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 04:55:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 04:55:39 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Wed Oct 19 04:55:39 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.917
[Wed Oct 19 04:55:39 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.52"
[Wed Oct 19 04:55:40 2011] fullrun_ccd1_acisf12935_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 19 04:55:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12935_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 04:55:40 2011] fullrun_ccd1_acisf12935_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 19 04:55:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12935_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 04:55:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12935_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12935_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 04:55:40 2011] fullrun_ccd1_acisf12935_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 19 04:55:40 2011] fullrun_ccd1_acisf12935_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 19 04:55:40 2011] Fit fullrun_ccd1_acisf12935_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 19 04:55:46 2011] Spatial fit model total counts = 33.329100, observed total counts = 33.000000
[Wed Oct 19 04:55:46 2011] Offset between fit and detection position for source 7 = 0.096771 pixels
[Wed Oct 19 04:55:46 2011] 33.098069 total counts/ 0.372869 bgd. counts: snr = 53.592519
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.096771 pixels
  Position = (940.4, 868.6) = 17 56 48.19 66 32 1.6
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 32.7 +/- 5.8
  Background counts = 0.4
  Rate = 0.002 +/- 0.0003
[Wed Oct 19 04:55:46 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 04:55:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 04:55:46 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 04:55:46 2011] Source does appear to be extended
[Wed Oct 19 04:55:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 04:56:27 2011] Not overwriting source region fullrun_ccd1_acisf12935_pi14-548_pass1_cl_src7_src.reg
[Wed Oct 19 04:56:27 2011] Extracting stamp from image fullrun_ccd1_acisf12935_pi14-548_cl_sm2.00.img.gz, (919, 847) - (962, 890)
[Wed Oct 19 04:56:27 2011] Writing fullrun_ccd1_acisf12935_pi14-548_pass1_cl_src7.gif
[Wed Oct 19 04:56:28 2011] ../../acisf12935/products/events/fullrun_ccd1_acisf12935_pi14-548_pass1_cl_src7_src.evt and ../../acisf12935/products/events/fullrun_ccd1_acisf12935_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Wed Oct 19 04:56:28 2011] Size of ../../acisf12935/products/events/fullrun_ccd1_acisf12935_pi14-548_pass1_cl_src7_src.evt.gz[events] = 33 counts
[Wed Oct 19 04:56:28 2011] Mean chipx,y = (95.03, 803.88)
[Wed Oct 19 04:56:28 2011] Mean tdetx,y = (4328.12, 4202.03)
[Wed Oct 19 04:56:28 2011] chipx,y range = (79.00-109.00, 786.00-819.00)
[Wed Oct 19 04:56:28 2011] Size of ../../acisf12935/products/events/fullrun_ccd1_acisf12935_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 5 counts
[Wed Oct 19 04:56:28 2011] ../../acisf12935/products/images/fullrun_ccd1_acisf12935_pi14-548_pass1_cl_src7_src.img and ../../acisf12935/products/images/fullrun_ccd1_acisf12935_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Wed Oct 19 04:56:28 2011] ../../acisf12935/products/spectra/fullrun_ccd1_acisf12935_pi14-548_pass1_cl_src7_src.pi and ../../acisf12935/products/spectra/fullrun_ccd1_acisf12935_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Wed Oct 19 04:56:28 2011] Not generating rmf since there are only 32 counts
[Wed Oct 19 04:56:31 2011] ../../acisf12935/products/lightcurves/fullrun_ccd1_acisf12935_pi14-548_pass1_cl_src7_src.lc and ../../acisf12935/products/lightcurves/fullrun_ccd1_acisf12935_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Wed Oct 19 04:56:53 2011] 194.022
[Wed Oct 19 04:57:54 2011] Updating aperture counts using extracted products
[Wed Oct 19 04:57:54 2011] Error reading totcts from fullrun_ccd1_acisf12935_pi14-548_pass1_cl_src7_src.pi.gz
[Wed Oct 19 04:57:54 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 04:57:54 2011] Using photon index=1.80, rate=0.00194, arf fullrun_ccd1_acisf12935_pi14-548_pass1_cl_src7.arf
[Wed Oct 19 04:57:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 04:57:54 2011] Updating source flux to 2.3e-14
[Wed Oct 19 04:57:57 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 19 04:57:58 2011] acisf12935/analysis//spectral/fullrun_ccd1_acisf12935_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete