[Wed Oct 19 04:54:38 2011] Detection parameters: Position = (1011.1, 517.5) = 17 56 48.06 66 37 44.2 Extent = 0.6" x 0.5", rotation angle = 141 degrees Source counts = 12.8 +/- 3.6 Background counts = 0.2 Rate = 0.0008 +/- 0.0002 [Wed Oct 19 04:54:39 2011] Off-axis axis estimate = 3.97' [Wed Oct 19 04:55:15 2011] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting [Wed Oct 19 04:55:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Oct 19 04:55:15 2011] Initial guess for spatial extent in simple fitting = 0.82" [Wed Oct 19 04:55:15 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063 [Wed Oct 19 04:55:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.82" [Wed Oct 19 04:55:15 2011] fullrun_ccd0_acisf12935_pi14-548_cl_pass0_src1.ximg exists [Wed Oct 19 04:55:15 2011] fullrun_ccd0_acisf12935_pi14-548_cl_pass0_src1_1.ximg exists [Wed Oct 19 04:55:15 2011] Fit fullrun_ccd0_acisf12935_pi14-548_cl_pass0_src1 appears to have run properly [Wed Oct 19 04:55:15 2011] fullrun_ccd0_acisf12935_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Wed Oct 19 04:55:15 2011] fullrun_ccd0_acisf12935_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Wed Oct 19 04:55:15 2011] Fit fullrun_ccd0_acisf12935_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly [Wed Oct 19 04:55:21 2011] Spatial fit model total counts = 12.157500, observed total counts = 13.000000 [Wed Oct 19 04:55:21 2011] Offset between fit and detection position for source 1 = 0.703067 pixels [Wed Oct 19 04:55:21 2011] 12.157500 total counts/ 0.000000 bgd. counts: snr = 6047639.321041 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.703067 pixels Position = (1011.6, 518.0) = 17 56 48.06 66 37 44.2 Extent = 0.7 (0.6-0.9)", rotation angle = 0 Source counts = 12.2 +/- 3.5 Background counts = 0.0 Rate = 0.0007 +/- 0.0002 [Wed Oct 19 04:55:21 2011] Vigneting correction estimate = 1.000000 [Wed Oct 19 04:55:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Oct 19 04:55:21 2011] Assessing source extent using major axis lower bound [Wed Oct 19 04:55:21 2011] Source does appear to be extended [Wed Oct 19 04:55:21 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Oct 19 04:55:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Oct 19 04:55:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Oct 19 04:55:38 2011] Initial guess for spatial extent in simple fitting = 0.74" [Wed Oct 19 04:55:38 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.991 [Wed Oct 19 04:55:38 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.74" [Wed Oct 19 04:55:39 2011] fullrun_ccd0_acisf12935_pi14-548_cl_pass1_src1.ximg exists [Wed Oct 19 04:55:39 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf12935_pi14-548_cl_pass1_src1.csv [Wed Oct 19 04:55:39 2011] fullrun_ccd0_acisf12935_pi14-548_cl_pass1_src1_1.ximg exists [Wed Oct 19 04:55:39 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf12935_pi14-548_cl_pass1_src1.csv [Wed Oct 19 04:55:39 2011] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf12935_pi14-548_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf12935_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Oct 19 04:55:39 2011] fullrun_ccd0_acisf12935_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Wed Oct 19 04:55:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12935_pi14-548_cl_pass1_tfrozen_src1.csv [Wed Oct 19 04:55:39 2011] fullrun_ccd0_acisf12935_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Wed Oct 19 04:55:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12935_pi14-548_cl_pass1_tfrozen_src1.csv [Wed Oct 19 04:55:39 2011] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf12935_pi14-548_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf12935_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Oct 19 04:55:46 2011] Spatial fit model total counts = 11.984900, observed total counts = 13.000000 [Wed Oct 19 04:55:46 2011] Offset between fit and detection position for source 1 = 0.016475 pixels Spatial fit parameters: Offset between fit and detection position for source 1 = 0.016475 pixels Position = (1011.6, 518.0) = 17 56 48.06 66 37 44.2 Extent = 0.8 (0.6-0.9)", rotation angle = 0 Source counts = 12.0 +/- 3.5 Background counts = 0.0 Rate = 0.0007 +/- 0.0002 [Wed Oct 19 04:55:46 2011] Vigneting correction estimate = 1.000000 [Wed Oct 19 04:55:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Oct 19 04:55:46 2011] Assessing source extent using major axis lower bound [Wed Oct 19 04:55:46 2011] Source does appear to be extended [Wed Oct 19 04:55:46 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Oct 19 04:56:01 2011] Not overwriting source region fullrun_ccd0_acisf12935_pi14-548_pass1_cl_src1_src.reg [Wed Oct 19 04:56:01 2011] Extracting stamp from image fullrun_ccd0_acisf12935_pi14-548_cl_sm2.00.img.gz, (977, 484) - (1046, 552) [Wed Oct 19 04:56:01 2011] Writing fullrun_ccd0_acisf12935_pi14-548_pass1_cl_src1.gif [Wed Oct 19 04:56:03 2011] ../../acisf12935/products/events/fullrun_ccd0_acisf12935_pi14-548_pass1_cl_src1_src.evt and ../../acisf12935/products/events/fullrun_ccd0_acisf12935_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create [Wed Oct 19 04:56:03 2011] Size of ../../acisf12935/products/events/fullrun_ccd0_acisf12935_pi14-548_pass1_cl_src1_src.evt.gz[events] = 13 counts [Wed Oct 19 04:56:03 2011] Mean chipx,y = (989.46, 571.62) [Wed Oct 19 04:56:03 2011] Mean tdetx,y = (3632.62, 4142.54) [Wed Oct 19 04:56:03 2011] chipx,y range = (971.00-1003.00, 557.00-588.00) [Wed Oct 19 04:56:03 2011] Size of ../../acisf12935/products/events/fullrun_ccd0_acisf12935_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 4 counts [Wed Oct 19 04:56:03 2011] ../../acisf12935/products/images/fullrun_ccd0_acisf12935_pi14-548_pass1_cl_src1_src.img and ../../acisf12935/products/images/fullrun_ccd0_acisf12935_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create [Wed Oct 19 04:56:03 2011] ../../acisf12935/products/spectra/fullrun_ccd0_acisf12935_pi14-548_pass1_cl_src1_src.pi and ../../acisf12935/products/spectra/fullrun_ccd0_acisf12935_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create [Wed Oct 19 04:56:03 2011] Not generating rmf since there are only 11 counts [Wed Oct 19 04:56:06 2011] ../../acisf12935/products/lightcurves/fullrun_ccd0_acisf12935_pi14-548_pass1_cl_src1_src.lc and ../../acisf12935/products/lightcurves/fullrun_ccd0_acisf12935_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create [Wed Oct 19 04:56:27 2011] 189.525 [Wed Oct 19 04:57:54 2011] Updating aperture counts using extracted products [Wed Oct 19 04:57:54 2011] Error reading totcts from fullrun_ccd0_acisf12935_pi14-548_pass1_cl_src1_src.pi.gz [Wed Oct 19 04:57:54 2011] Calculating source flux in energy range 0.30-8.00 [Wed Oct 19 04:57:54 2011] Using photon index=1.80, rate=0.000712, arf fullrun_ccd0_acisf12935_pi14-548_pass1_cl_src1.arf [Wed Oct 19 04:57:54 2011] Assuming count rate is from the 0.20-8.00 bandpass [Wed Oct 19 04:57:54 2011] Updating source flux to 8.7e-15 [Wed Oct 19 04:57:56 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting [Wed Oct 19 04:57:57 2011] acisf12935/analysis//spectral/fullrun_ccd0_acisf12935_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete